Extrawot cont'd again and again....

All back together, bought two digital servos, one for the elevator and one for the rudder, they are the bog standard spektrum ones and apparently are quite torquey. I used Kavan furry mylar hinges pegged with cocktail sticks after epoxying them in, was going to use gorilla glue but didn't find it until after I'd used the epoxy .
I've been rethinking the colour scheme, the original builder gave me a set of vynil trims that I felt was not the right colour for me.
I rolled them out tonight and blow me they are just the ticket so I'll be slapping them on tomorrow night.
I have two dynathrust props one 18 x 6 and one 17 x 8, the thing is about these props they are quite heavy one is 125 grammes the other 127, nearly twice as heavy as an apc so it'll cut down on lead if I need any. Just have to trim the carl goldberg spinner I have to fit it, this was originally intended for the goldberg ultimate I'm building but I think I'll put an alloy one one there.
I have two canopies one for a single seater version, the other for a two seater, christ it's not even semi-scale!! it does look prettier with the 2 seat version though.
No hurry to get it all together, no flying weather for a couple of weeks yet real depressions swinging in from the atlantic, at least it's not cold.
First thing to do will be to run in the laser 200 vee, the hog of the model aero world! .
I'll get a couple of pix without the colour then some with the colour and post them shortly.