Thread Tools
Old Feb 14, 2011, 07:44 PM
jim80 is offline
Find More Posts by jim80
Registered User
Quote:
Originally Posted by redhotpearl View Post
Thanks Buffy. That sounds pretty reasonable. Any idea where to get those levels? I have one but I'd rather go to a store and buy them than order them.
I put my hexa (and quads, in fact) on a big plastic bucket - having leveled the bucket first.
The arms rest on the rim, landing gear etc inside the bucket.
Seemed the easiest way to me, having struggled with wedges under the landing gear etc.
I say bucket, it's actually an empty horse food container...
Sign up now
to remove ads between posts
Old Feb 14, 2011, 09:24 PM
13brv3 is offline
Find More Posts by 13brv3
13brv3's Avatar
Quote:
Originally Posted by saabguyspg View Post

I am wondering about those nice wooden motors, they are 5g lighter than the apc's in the 12x3.8 version and come in a multitude of sizes.
You're talking about the XOAR props right? I took a brief look through some of the US dealers, and never saw a pusher version. Has anyone ordered both versions from a US shop?

I've thought many times about using the CNC machine to make props. The problem (besides the nightmare of designing it) has been what to make them out of. Even the most appropriate wood is probably not ideal, and plastics are too heavy.

The only other thought would be to machine a mold for CF, but I'd have to lay up the CF, and you can forget that. (I despise working with fiberglass, and I'm sure CF is even worse).

If I can find some of those XOAR props I will certainly try them.

Rusty
Site Sponsor
Old Feb 14, 2011, 09:50 PM
saabguyspg is online now
Find More Posts by saabguyspg
saabguyspg's Avatar
what a marooon! I am sorry I meant props not motors....

yes I meant them.... I have emailed them to see if they have any pushers that match the sizes we commonly use but I think tritan as already contacted them.
At my elevation I have actually run 12" apc props on the turnigy 2217's and 4S with no problems.... I think becuas of the thinner air I can get away with that.... I want to order some 11" props and try them on the co-axial hexa...

I will email them tomorrow and see if I can't get some to me soon.


Steve


Quote:
Originally Posted by 13brv3 View Post
You're talking about the XOAR props right? I took a brief look through some of the US dealers, and never saw a pusher version. Has anyone ordered both versions from a US shop?

I've thought many times about using the CNC machine to make props. The problem (besides the nightmare of designing it) has been what to make them out of. Even the most appropriate wood is probably not ideal, and plastics are too heavy.

The only other thought would be to machine a mold for CF, but I'd have to lay up the CF, and you can forget that. (I despise working with fiberglass, and I'm sure CF is even worse).

If I can find some of those XOAR props I will certainly try them.

Rusty
Site Sponsor
Old Feb 14, 2011, 10:00 PM
Aerhead is offline
Find More Posts by Aerhead
Aerhead

Props


Rusty

All you have to do to get the perfect prop isss. I hate it when it starts out what way because I know it going to be a lot of work.
My prop idea is no different. I have been playing with Vertran. It's not to hard to find and it has the perfect specs for a building props. Stronger and much more flexible then Kevlar and Graphic fiber. And maybe the best characteristic is it has very low creep. I have found some very good info on the web on how to mold your own props.
On a MK note, I'm working on my 24 motor MK I built in 2009 and trying to use new firmware for 8 motor. I know it really easy but I just can't see it. I see the octo graphics in the file for MK tool but how do you select the Flight controller firmware? All I find is one firmware and it only for a quad. I jusr know I'll look at it tomorrow and I see it right away. I finally found it, Alt settings.

Larry





Quote:
Originally Posted by 13brv3 View Post
You're talking about the XOAR props right? I took a brief look through some of the US dealers, and never saw a pusher version. Has anyone ordered both versions from a US shop?

I've thought many times about using the CNC machine to make props. The problem (besides the nightmare of designing it) has been what to make them out of. Even the most appropriate wood is probably not ideal, and plastics are too heavy.

The only other thought would be to machine a mold for CF, but I'd have to lay up the CF, and you can forget that. (I despise working with fiberglass, and I'm sure CF is even worse).

If I can find some of those XOAR props I will certainly try them.

Rusty
Last edited by Aerhead; Feb 14, 2011 at 11:09 PM.
Old Feb 14, 2011, 10:27 PM
dmsgodeep is offline
Find More Posts by dmsgodeep
Registered User
Quote:
Originally Posted by hardhat View Post
Here is some 'bird' footage, hopping remotely onto the yellow container (GoPro tied directly to leg..):
Hardhat...very cool video.
Love the thought of "exploring" like that using FPV.
I'm impressed with your range. Can you tell me what video xmitter/receiver you are using and antenna, etc. I'm trying to increase my video signal range.

Thanks,
Brent
Old Feb 15, 2011, 10:12 AM
hardhat is offline
Find More Posts by hardhat
Registered User
I dunked half my Oktokopter in water, and now one motor is full of dried mud and running noisy. Can I open and clean it? How?


Brent, my range is limited by the battery, as long as i can come back. 1W video Tx and EzUHF is all very much overkill, others fly 10-30km away with that. With the Oktokopter I have never been further than 2km, and then I had to put it down early.. too much headwind. But I like the EzUHF because of the reception info/alarm I get in EzOSD, it goes down quickly when you get low or behind buildings. I did make a landing gear out of a single long strip of plastic tied into an oval, that gives it the bounce on landing. Works well in FPV as landing isn't always as smooth..
Last edited by hardhat; Feb 15, 2011 at 10:40 AM.
Old Feb 15, 2011, 01:19 PM
GC9N is offline
Find More Posts by GC9N
MK Addict
GC9N's Avatar
can i ask something fast
if i wanna send waypoints to a hexa via laptop while the hexa flies ...

i need ONE Bluetooth-Modul F2M03GXA + BT-Adapter

https://www.mikrocontroller.com/inde...roducts_id=210

OR Two???
one in Kopter and one in Laptop...
or they work with One in kopter and connect the laptops embeded Bluetooth with the copter... i know that the range is limited but it might wrk.
Old Feb 15, 2011, 01:47 PM
metalmanbaris is offline
Find More Posts by metalmanbaris
Registered User

250 meter limit of Navictrl board


Is there any progress on changing the 250 meter limit of setting waypoints. Did someone find a workaround to change this limit ?


Or in other words, does someone have idea on how much code they cjanged between version 0.15 and 0.22 in GPS.c

Metalman....
engineer the flying....
Old Feb 15, 2011, 01:54 PM
GC9N is offline
Find More Posts by GC9N
MK Addict
GC9N's Avatar
how you set waypoints? via bluetooth?
Old Feb 15, 2011, 02:00 PM
dleroi is offline
Find More Posts by dleroi
Don L.
Quote:
Originally Posted by gc9n View Post
can i ask something fast
if i wanna send waypoints to a hexa via laptop while the hexa flies ...

i need ONE Bluetooth-Modul F2M03GXA + BT-Adapter

https://www.mikrocontroller.com/inde...roducts_id=210

OR Two???
one in Kopter and one in Laptop...
or they work with One in kopter and connect the laptops embeded Bluetooth with the copter... i know that the range is limited but it might wrk.
GC,

One of these in the Kopter will link with a laptop's embedded BT. If the laptop doesn't have BT, you need a BT adapter for the laptop.

I found that the BT Module interfered with the MK-GPS when it was mounted nearby, so I mounted mine just above a skid and if worked great.

- Don
Old Feb 15, 2011, 02:15 PM
Michael64 is offline
Find More Posts by Michael64
Registered User
Hello Guys
I have been playing with first quad its a X650 dont flame me it was meant as a intro into the multi rotor world Iam coming from the heli world which I have been flying for about 10 yrs and decided to change flying platforms. The x650 is a learner but not for AP. He is the question is the MK quad or the Hexa as good flying as the videos or does it have its issues and can they be worked out. I do fpv and Aerial Photography looking for a stable well behaved multi rotor and would like opinions from people flying them. Thanks for any info you would give me.

Michael64
Old Feb 15, 2011, 03:56 PM
tritan is offline
Find More Posts by tritan
Registered User
Quote:
Originally Posted by saabguyspg View Post
yes I meant them.... I have emailed them to see if they have any pushers that match the sizes we commonly use but I think tritan as already contacted them.

Steve
Yes,
I have emailed them a couple of times and I am now waiting for about 8 props from 10x4 up to 14x4 in different sizes to arrive in a couple of days and then I will test them in my newly built thrust rig.

All XOAR's are available in both CW & CCW version, according to XOAR.
/Hakan
Old Feb 15, 2011, 04:04 PM
Mactadpole is offline
Find More Posts by Mactadpole
Registered User
Quote:
Originally Posted by tritan View Post
Yes,
I have emailed them a couple of times and I am now waiting for about 8 props from 10x4 up to 14x4 in different sizes to arrive in a couple of days and then I will test them in my newly built thrust rig.

All XOAR's are available in both CW & CCW version, according to XOAR.
/Hakan
Did you order directly from XOAR? I would like to try some of their props but can't find anyone who carries CW & CCW in the sizes I want.

What did they cost?

Thanks.
Old Feb 15, 2011, 08:54 PM
Michael64 is offline
Find More Posts by Michael64
Registered User
Hello Mactadpole
Are you flying a Hexa and Oct from MK , I live about 1.5 hours from you to the NE been thinking about building a quad and hexa and looking for someone I can talk to about one.

Michael64
Old Feb 16, 2011, 07:28 AM
tritan is offline
Find More Posts by tritan
Registered User
Quote:
Originally Posted by Mactadpole View Post
Did you order directly from XOAR? I would like to try some of their props but can't find anyone who carries CW & CCW in the sizes I want.

What did they cost?

Thanks.
No, I bought from a very nice guy:
www.electricwingman.co.uk

Excellent service, fast shipping, good prices, etc.
Highly recommended.
Hakan


EDIT, correct link: www.electricwingman.com
Last edited by tritan; Feb 17, 2011 at 07:30 AM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Mikrokopter Okto 2 build Roger_IIT Multirotor Talk 6 Feb 03, 2011 09:22 AM
Discussion Mikrokopter ME 2.0 Okto Build robin4 Multirotor Talk 16 Jan 12, 2011 03:07 PM
Discussion Mikrokopter / UAVP / quadrocopter / quadrotor build Arthur P. Multirotor Talk 16696 Nov 10, 2010 05:49 PM
Discussion X-3D Brushless Quadrocopter, general quadrocopter, x-ufo discussion PART 2 tend2it Multirotor Talk 2203 Nov 08, 2008 09:23 PM