Nitroplanes CMP 90MM T-45 Hawk 2 - Page 79 - RC Groups
Thread Tools
May 12, 2011, 09:47 AM
The blade numbers go up to 11
stumax's Avatar
Geez, Mike! Get an SM89-45 for your new T-45 and you will know what they really sound like! Nowhere near as loud as that, that's for sure. Sorry to hear about your 1st one dying an early death. I'd just make a new wing if it were mine, but I guess for ~$160 who would bother.

Sign up now
to remove ads between posts
May 12, 2011, 11:03 AM
Registered User
erh7771's Avatar
Nitro planes does ship parts, ask them to add it to an old order and mark the older order incomplete and they'll notify you when they have a part in and ship it to you.
May 12, 2011, 11:18 AM
Renegade Fun Forever!!
rvincent's Avatar
I agree Stu! I have the SM89-45 in mine
May 12, 2011, 11:19 AM
Renegade Fun Forever!!
rvincent's Avatar
Sorry SM90-45
May 12, 2011, 11:38 AM
Not a Drone pilot
lashmett75's Avatar
Originally Posted by mpope1
Got my 2nd one in mail today, everything looked great until I got to the fuse, the tip of the vertical looked like someone tried to take a bite out of it. Sent an email to nitroplanes, and they got right back to me and are gonna find me a new fuse. I am in no rush, was gonna build this one over the hot AZ summer months on my dining room table in the a/c.

Hey Mike,

Just CA that bad boy..HA HA HA

PS...whens the next party
May 12, 2011, 12:59 PM
Registered User
mpope1's Avatar
Sorry Stu, wish I could put a stumax in mine. Money is tight, can barely afford to replace the T-45. Memorial weekend James, that Sunday, if your in town come on by!
May 12, 2011, 01:28 PM
Registered User
Bob what motor is your hand covering? LOL
Originally Posted by rvincent
I agree Stu! I have the SM89-45 in mine
May 12, 2011, 01:52 PM
Renegade Fun Forever!!
rvincent's Avatar
A top secret USA RC Jets motor

At least its top secret for a little while longer
May 12, 2011, 02:54 PM
edf flyer
Mannyman535's Avatar
Originally Posted by cableguy351
I'm running the Wemo fan, ARC 36-75-1 motor, castle ice 100 and a 4 cell and a 3 cell 3600 mah in series for 7 cells , can go to 8 if needed but it flys fine on 7 . I might try some 4000mah I have to get a little longer flight time

I see you have some exit holes where your exhaust ducting is, can you post some pics of where your esc is located and your exit holes.

May 12, 2011, 03:36 PM
Registered User
I can try to get you some pics later , but I opened up the 2 scoops up on top of the fusalage behind the canopy and mounted the ESC up there and just cut those 2 holes in the back so the air has a place to exit
May 12, 2011, 10:57 PM
Registered User
mpope1's Avatar
Wow, nitroplanes is on the ball. I already got notice of shipment on a replacement in less then 24 hours, NICE!
May 13, 2011, 12:53 PM
1.21 Gigawatts!
Steph280's Avatar
Nice to hear they finally got their act together!
May 15, 2011, 05:04 PM
Oh Yeah!
SteveC68's Avatar
If you had a choice between the CMP Hawk or the HET 90mm Super Sniper which would you chose?
May 15, 2011, 05:06 PM
Registered User
mpope1's Avatar
I don't know much about the super sniper, but the t-45 is cheap and has alot of nice scale feature such as a drop tank, tail hook and hobby king has a very detailed cockpit and pilots for under 50 bucks!
May 15, 2011, 08:11 PM
Watts Up?
jet-ster's Avatar
I have both the T-45 and the HET super sniper, CMP T-45 is way better. Sniper is plagued with flawes, V1, V2 and V3....Mine was a V3 with some wash out at the elevator. I havn't flown my T-45 yet but it looks darn NICER!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Nitroplanes CMP 90MM T-45 Hawk FlyBoyTha1 Electric Ducted Fan Jet Talk 216 Nov 10, 2010 12:24 PM
Cool New CMPro Composite T-45 90mm chalmrast Electric Ducted Fan Jet Talk 5 Nov 03, 2010 10:54 PM
Sold Ultrafly T-45 Hawk Pusher NIB mgroves Aircraft - Electric - Jets (FS/W) 0 Sep 15, 2010 03:08 PM
Sold Ultrafly T-45 BAE Hawk Pusher mgroves Aircraft - Electric - Airplanes (FS/W) 0 Sep 15, 2010 03:06 PM