Thread Tools
Nov 11, 2010, 04:31 PM
1.21 Gigawatts!
Steph280's Avatar
I have an old Hacker B50-15L. If I were to get a MIDI fan and run this on 6S-5000, do you guys think this system would be considered light and have enough power to fly this bird?
Sign up now
to remove ads between posts
Nov 11, 2010, 04:36 PM
Watts Up?
jet-ster's Avatar
I was checking out the formers up around the nose gear and battery tray, they are Super thin ply! Not sure why they have decided to use them But the wings are good.

Danny
Nov 11, 2010, 05:19 PM
Lithium Member
Herb's Avatar
Quote:
Originally Posted by Steph280
I have an old Hacker B50-15L. If I were to get a MIDI fan and run this on 6S-5000, do you guys think this system would be considered light and have enough power to fly this bird?
Steph, B50-15L on 8S with some throttle managment (2200W). 7S would be marginal I think.

They are good motors and hold up very well

- but maybe a motor with cooling holes (Neu 15xx, Arc, HYK, Mega EDF, ...) would give you better peace of mind.

http://www.aircraft-world.com/prod_d...ets/hm-B50.htm

http://www.s4a.ch/eflight/fancalc.htm

.
Nov 11, 2010, 05:35 PM
1.21 Gigawatts!
Steph280's Avatar
Thanks Herb!
Nov 11, 2010, 06:40 PM
Registered User
FlyBoyTha1's Avatar
Quote:
Originally Posted by jet-ster
I was checking out the formers up around the nose gear and battery tray, they are Super thin ply! Not sure why they have decided to use them But the wings are good.

Danny
Here's how i used the TamJets mini retracts sinse you have a pair, used the stock wire strut then cut the end off fits perfect in the retract bay.
Nov 11, 2010, 07:09 PM
Renegade Fun Forever!!
rvincent's Avatar
Thanks Marvin! So Tam's fit right in the blocks with no mods?
Nov 11, 2010, 07:29 PM
deltas are cool
AIR SALLY's Avatar
oh boy i have 2 sets of tams and 2 sets of 602's ...a midi ...just need a motor .....oh and the Plane...man i need more RX's too
Nov 11, 2010, 07:41 PM
Registered User
FlyBoyTha1's Avatar
Quote:
Originally Posted by rvincent
Thanks Marvin! So Tam's fit right in the blocks with no mods?
Yep, and i guess the 602's would be next to the best without mods.
Nov 11, 2010, 07:50 PM
speedin n da weeds :)
sikky's Avatar
Fly Boy Tha 1

I can't find the works.......................................... for your actions....

Thanks Tumbler for getting this going again, really looking forward to the flight review. Kinda wantta get it right now......hard not to push the buttttttttttooooooooooonnnnnnnnnn-must wait!!
Last edited by sikky; Nov 11, 2010 at 07:55 PM.
Nov 12, 2010, 06:25 AM
Watts Up?
jet-ster's Avatar
with past expriences with nitro is that if you don't pull the trigger now, it might be OUT of STOCK forever.....
Nov 12, 2010, 06:25 AM
Watts Up?
jet-ster's Avatar
forever.....
Nov 12, 2010, 10:14 AM
Registered User
Tumbler's Avatar
sometimes even longer with them.


Quote:
Originally Posted by jet-ster
forever.....
Nov 12, 2010, 10:21 AM
Renegade Fun Forever!!
rvincent's Avatar
Man I'm so bummed! My fuse was crushed in shipping Both inlets and the upper sides of the fuse ducting are cracked like a spider web. What a shame! This is such a nice looking plane and the pictures make it look really good, but its BETTER in person When they open at noon I'm calling and going to drive in there and exchange it! I wanted to get on this right away. I will be working in AZ all next week and planning on taking this with me to get it mostly built at night in the hotel room I sure hope they let me come in and exchange it I pickup up all my servos yesterday at Cermark and I already had the Tam retracts, so I just need to assemble it. When I get back I can take it to Air Sally to have a look at the ducting. They actually look good to me but big for scale.
Nov 12, 2010, 10:23 AM
Registered User
Tumbler's Avatar
Oh noooo! Sorry man. I bought 2 Falcon .25's a few years ago from them and the canopies were crushed on both of them. Never did get replacements, but I think their service is at least a little better now days so you will be fine I am sure.

Brian

Quote:
Originally Posted by rvincent
Man I'm so bummed! My fuse was crushed in shipping Both inlets and the upper sides of the fuse ducting are cracked like a spider web. What a shame! This is such a nice looking plane and the pictures make it look really good, but its BETTER in person When they open at noon I'm calling and going to drive in there and exchange it! I wanted to get on this right away. I will be working in AZ all next week and planning on taking this with me to get it mostly built at night in the hotel room I sure hope they let me come in and exchange it I pickup up all my servos yesterday at Cermark and I already had the Tam retracts, so I just need to assemble it. When I get back I can take it to Air Sally to have a look at the ducting. They actually look good to me but big for scale.
Nov 12, 2010, 10:27 AM
Renegade Fun Forever!!
rvincent's Avatar
Yeah I have had to go in and get exchanges several times in the past without issue. They really do truly want to be the best in service and have gone out of their way to help.

It's just such a let down! It's like being a 10 year at Christmas and Grandma or Santa forgot the Batteries with the cool new Batmobile


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Nitroplanes CMP 90MM T-45 Hawk FlyBoyTha1 Electric Ducted Fan Jet Talk 216 Nov 10, 2010 12:24 PM
Cool New CMPro Composite T-45 90mm chalmrast Electric Ducted Fan Jet Talk 5 Nov 03, 2010 10:54 PM
Sold Ultrafly T-45 Hawk Pusher NIB mgroves Aircraft - Electric - Jets (FS/W) 0 Sep 15, 2010 03:08 PM
Sold Ultrafly T-45 BAE Hawk Pusher mgroves Aircraft - Electric - Airplanes (FS/W) 0 Sep 15, 2010 03:06 PM