Thread Tools
Old Dec 10, 2012, 11:11 PM
stingeragents is offline
Find More Posts by stingeragents
Registered User
Thanks. I was trying to copy effluxs to an extent. The underside is all yellow. I added some clear coat to both sides so its more shiny. My first one wasnt as easy to see as i would of liked so went with bright colors on this one
Sign up now
to remove ads between posts
Old Dec 11, 2012, 12:31 AM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
good idea ...these fast small jet are hard to see
Old Dec 14, 2012, 10:07 AM
TimJohnson is offline
Find More Posts by TimJohnson
Split S
TimJohnson's Avatar
I just received an email this morning from Hobby People selling the bird for 39.99
Old Dec 14, 2012, 10:24 AM
Remote_Pilot is offline
Find More Posts by Remote_Pilot
Champagne Supernova
Remote_Pilot's Avatar
So where should I line up the tailerons at initial setup for maiden ? I saw a post somewhere I should line up the front of the taileron flush with bottom of the fuse.

Also It seems like the tailerons really droop I wish I could find a rear shot of somebody esles to compare to make sure I got mine right. I mean cant imagine I did something different that would cause them to droop more than they should ? lol

Im really not liking the linkage setup they give you seems kinda hokey. Anybody done anything different with the linkages ?

Looks like im getting about 525 watts on 4s. Should be pretty good with that eh ?
Last edited by Remote_Pilot; Dec 14, 2012 at 10:30 AM.
Old Dec 14, 2012, 10:24 AM
Remote_Pilot is offline
Find More Posts by Remote_Pilot
Champagne Supernova
Remote_Pilot's Avatar
Quote:
Originally Posted by TimJohnson View Post
I just received an email this morning from Hobby People selling the bird for 39.99
Mine was $29.99
Old Dec 14, 2012, 12:58 PM
carlsoti is offline
Find More Posts by carlsoti
hass-alfed and bass-ackwards
carlsoti's Avatar
Quote:
Originally Posted by FlyHighSelllow View Post
Looks like im getting about 525 watts on 4s. Should be pretty good with that eh ?
Some will tell you that's not gonna be that fast. Others, like myself, would say, 500+ watts on 4S will be PLENTY to fly this thing.
Old Dec 14, 2012, 08:11 PM
stingeragents is offline
Find More Posts by stingeragents
Registered User
500 watts will fly it nice. My very draggy much bigger f15 flies fine on 500 watts
Old Dec 14, 2012, 08:29 PM
Remote_Pilot is offline
Find More Posts by Remote_Pilot
Champagne Supernova
Remote_Pilot's Avatar
Quote:
Originally Posted by carlsoti View Post
Some will tell you that's not gonna be that fast. Others, like myself, would say, 500+ watts on 4S will be PLENTY to fly this thing.
That's what I'm thinking. I'm stock. No glass etc. Haven't weighed it yet but it's pretty light. Should be 250 watts per pound minimum.
Old Dec 15, 2012, 09:58 AM
smccrory60 is offline
Find More Posts by smccrory60
Registered User
Quote:
Originally Posted by FlyHighSelllow View Post
So where should I line up the tailerons at initial setup for maiden ? I saw a post somewhere I should line up the front of the taileron flush with bottom of the fuse.

Also It seems like the tailerons really droop I wish I could find a rear shot of somebody esles to compare to make sure I got mine right. I mean cant imagine I did something different that would cause them to droop more than they should ? lol

Im really not liking the linkage setup they give you seems kinda hokey. Anybody done anything different with the linkages ?

Looks like im getting about 525 watts on 4s. Should be pretty good with that eh ?

See post 1530 on this page for the mods I did.

https://www.rcgroups.com/forums/show...2#post23249642
Old Dec 15, 2012, 08:39 PM
KCinNC is offline
Find More Posts by KCinNC
that's gonna leave a scar
anybody got a crashed fuselage with about 7" of good nose left lying around ? would keep me from having to buy another kit for now

i know...the nose is usually the crashed part
Old Dec 15, 2012, 08:48 PM
clive45 is offline
Find More Posts by clive45
It should fly at least once
clive45's Avatar
This any good?
Old Dec 15, 2012, 09:11 PM
KCinNC is offline
Find More Posts by KCinNC
that's gonna leave a scar
mine looks a bit different...is that from the Phase 3 EF-16?
Old Dec 15, 2012, 09:12 PM
Gnfghtr is offline
Find More Posts by Gnfghtr
Registered User
Gnfghtr's Avatar
Am I understanding correctly that there is a separate bushing that you guys (Air Sally) are putting on the inside of the taileron mount? Or has it be rectified by the manufacturer?
Old Dec 15, 2012, 09:17 PM
clive45 is offline
Find More Posts by clive45
It should fly at least once
clive45's Avatar
Yes it is a Phase 3 EF16, nose cone is on it.

I did not notice where you were at first and it would cost as much as a new kit $40 quote by someone the other day

FlyHighSelllow Quote:
Originally Posted by TimJohnson
I just received an email this morning from Hobby People selling the bird for 39.99

Mine was $29.99
Old Dec 15, 2012, 09:20 PM
efflux RC is offline
Find More Posts by efflux RC
efflux RC's Avatar
Quote:
Originally Posted by Gnfghtr View Post
Am I understanding correctly that there is a separate bushing that you guys (Air Sally) are putting on the inside of the taileron mount? Or has it be rectified by the manufacturer?
There's nothing to "rectify". It's an additional mod that Air Sally first did to reduce the moment are on the taileron pivot rods. The jet comes with a brass bushing in the pylons. The "bushing" is placed into the fuse to add additional bearing surface.
It's just any bushing or daimetrical part that you can find around your hobby room that fits the dia of the Taileron pivot rod.
Many folks use use wheel bushings, Use can use a brass busing as well.

I also like to dig the foam away from around the stock brass bushing, and fill the area with epoxy.
Site Sponsor
Latest blog entry: Updated blog Oct 2014


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Phase 3 Hobbypeople F16- build tips? Smokescreen38 Foamy EDFs 101 Jun 07, 2016 10:53 PM
Discussion Phase 3 - Hobbypeople F16 UPGRADES (cont.) Flying Beagle Foamy EDFs 13 Nov 10, 2010 03:54 AM
Discussion Phase 3 - Hobbypeople F16 UPGRADES ducatirdr Foamy EDFs 11482 Nov 09, 2010 11:05 PM
Wanted Phase 3 F16 body dmize Aircraft - Electric - Jets (FS/W) 0 Oct 01, 2010 11:36 PM
Sold Phase 3 f16 arf NorCal Hobbies Aircraft - Electric - Jets (FS/W) 1 Sep 02, 2010 08:30 PM