-Correx Mig-7 Scratch build- - Page 74 - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 29, 2011, 08:27 AM
Rhys - Forever Learning
I hope I rememember to mark the CG before i folded the Fuz
Switch installation tonight hopefully and start to think about starting to finish the nose.
Got an Overlander Sport 2000mah Flat Rx pack which will do the job nicely.
Need to sort the wing aileron connections too.
Sign up now
to remove ads between posts
Jul 07, 2011, 05:16 AM
What goes up must come down
aimrah2000's Avatar
Definitely worth a visit!
http://blog.toss.co.za/?p=2507

Markus
Jul 12, 2011, 01:21 PM
.....till the wind drops.
Sean Oelofse's Avatar
With all the strange weather conditions we are experiencing.....lack of wind to fly slope, I went to the local flat field to fly electrics. There I met Morne and Leon ready to maiden a Mig. The span is the same as our slopie. Leon did a fantastic job building and set-up of his Mig. Morne did the honours as Leon is still learning to fly.
No surprize...the Mig flew out no problem!
Jul 21, 2011, 02:17 PM
.....till the wind drops.
Sean Oelofse's Avatar
Here are a few quick vids on bending the torque rods.

Aileron Torque rod...Part 1. (0 min 31 sec)


Aileron Torque rod...Part 2. (0 min 28 sec)


Aileron Torque rod....Part 3. (0 min 18 sec)


I will paste another to show how you place the bend into the aileron.
Jul 21, 2011, 02:38 PM
Stirring the pot
johannlochner's Avatar
Last edited by johannlochner; Jul 21, 2011 at 08:25 PM.
Jul 21, 2011, 03:39 PM
.....till the wind drops.
Sean Oelofse's Avatar
Aileron Torque rod....Part 4. (0 min 10 sec)
Jul 22, 2011, 02:51 AM
.....till the wind drops.
Sean Oelofse's Avatar
Aileron Torque rod...Part 5. (0 min 16 sec)
Jul 22, 2011, 04:16 AM
.....till the wind drops.
Sean Oelofse's Avatar
Aileron Torque rod...Part 6. (0 min 18 sec)
Jul 22, 2011, 08:14 AM
Building with TLAR precision
Zenmaniac's Avatar
Would someone please buy Sean an SD card? I can't watch him suffer having to record to his camera's 128K internal memory any longer!

-= Dave
Jul 22, 2011, 11:13 AM
Registered User
Fubar 123's Avatar
Quote:
Originally Posted by Zenmaniac
Would someone please buy Sean an SD card? I can't watch him suffer having to record to his camera's 128K internal memory any longer!

-= Dave
Dave ,I think Sean is doing it in bite sized blocks so simple souls like me don't get lost. Now which part's next 3 or 4 durrr
Jul 22, 2011, 11:43 AM
.....till the wind drops.
Sean Oelofse's Avatar
...
Last edited by Sean Oelofse; Jul 22, 2011 at 11:57 AM.
Jul 22, 2011, 11:02 PM
...missing the PE Slope Rebels
Flying Beagle's Avatar
Quote:
Originally Posted by Sean Oelofse
If you have any Q's in mind......ask so that I can take photo's at that stage.
Enjoy!
aaahhhh Sean
could you please pull the wing apart, I would like to see a photo of the wood grain of the spar at 125mm from the wing tip....

seriously, thanks for taking the time to post the pics & vids, it will help anyone who's building in correx
Jul 23, 2011, 02:20 AM
.....till the wind drops.
Sean Oelofse's Avatar
No man!!....don't be silly!...the grain is the same all the way through!
FB, you seem to be enjoying correx plenty.....so if I can shed a little light, it will always be a pleasure! Your Fury is looking swell!!......get it??...swell??


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log first scratch-build! :D ClippedWings78 Foamies (Scratchbuilt) 7 Nov 01, 2010 07:45 PM
Build Log MiG-15 in 1/10th scale for PSS: A Scratch-Build John Rood Slope 4 Sep 17, 2010 08:41 PM