Thread Tools
Mar 10, 2011, 12:41 PM
.....till the wind drops.
Sean Oelofse's Avatar
Quote:
Originally Posted by juan_camilo
sean

https://www.rcgroups.com/forums/atta...mentid=3597628

how much distance is added to the original cast? .. for the fuselage?,, because as I see there is a hole .. is just straight pass without making the hole near the nose, or measures to further amend it.

thanks friend.
No hole!
Hole is for engine!
If you like, add 15mm to nose of fuselage.
No more amends!
Sign up now
to remove ads between posts
Mar 12, 2011, 10:14 AM
Registered User
Fuzzy B's Avatar
Had maiden flight with my Mig today at Slipper, she flew beautifully! Thanks to Johann, Daron and Cliff for helpling me get her in the air.
Mar 12, 2011, 12:48 PM
Stirring the pot
johannlochner's Avatar
Quote:
Originally Posted by Fuzzy B
Had maiden flight with my Mig today at Slipper, she flew beautifully! Thanks to Johann, Daron and Cliff for helpling me get her in the air.
Nah...
Did it all by himself!

Well done Andrew!
She flew great!
Congrats!!
Mar 12, 2011, 03:59 PM
.....till the wind drops.
Sean Oelofse's Avatar
Quote:
Originally Posted by Fuzzy B
Had maiden flight with my Mig today at Slipper, she flew beautifully! Thanks to Johann, Daron and Cliff for helpling me get her in the air.
Congrats!!
She looks great in the air!!
Mar 13, 2011, 09:57 AM
.....till the wind drops.
Sean Oelofse's Avatar
Yesterday, Morne, Breton and myself had an amazing time on the slope.....sorry Bakkie, but yes!!...you did miss a good fly!! I got there late in the pm....but only left there late.....like ""getting dark"" late!!

We were flying over the road...first checking for cars....and doing T&G's!!
So many times......I have to put a new F2 in the fuzz....ground mine gone on the road!

Touch and Go with a Correx Mig-7 Glider. (0 min 8 sec)
Mar 13, 2011, 01:08 PM
I think I'm Mode 2
Bakkie's Avatar
Awesome pics Sean

Here's some cellphone pics of Flying Beagles Franken Mig-7 taken today!
Mar 13, 2011, 04:51 PM
Stirring the pot
johannlochner's Avatar
Quote:
Originally Posted by Fuzzy B
Had maiden flight with my Mig today at Slipper, she flew beautifully! Thanks to Johann, Daron and Cliff for helpling me get her in the air.
Hey Fuzzy B
You were in the wrong place...
You should have been at MIG alley!
Mar 13, 2011, 05:37 PM
Building with TLAR precision
Zenmaniac's Avatar
Quote:
Originally Posted by Sean Oelofse
Some stills from yesterday.
Beautiful sunset pictures, Sean.

BTW, I know where you got your pose...
Mar 13, 2011, 11:49 PM
Registered User
Fuzzy B's Avatar
Quote:
Originally Posted by johannlochner
Hey Fuzzy B
You were in the wrong place...
You should have been at MIG alley!
I'm still happy I went to slipper, plenty of time to fly again at Maitlands!
Mar 14, 2011, 01:10 AM
.....till the wind drops.
Sean Oelofse's Avatar
Quote:
Originally Posted by Zenmaniac
Beautiful sunset pictures, Sean.

BTW, I know where you got your pose...
Ja!
I thought I'd seen that somewhere before!!
Mar 14, 2011, 11:34 AM
Registered User
Quote:
Originally Posted by Sean Oelofse
Matty,
I just took this pic to show you that......ok......it starts as a Clark-Y look-a-like. Keeping the LE in the jigs corner, ie, flat on the board. Then once you close, glue, the TE and release the clamps. in pops out into ......well, i'll just show what I mean when I get there.
https://www.rcgroups.com/forums/atta...mentid=3599619

sean,,

timber used to hold the leading edge while it sticks, it should be with the curve, or may be any wood??

and what is the meaning of: LE and TE?

thank you very much
Mar 14, 2011, 11:44 AM
.....till the wind drops.
Sean Oelofse's Avatar
Quote:
Originally Posted by juan_camilo
https://www.rcgroups.com/forums/atta...mentid=3599619

sean,,

timber used to hold the leading edge while it sticks, it should be with the curve, or may be any wood??

and what is the meaning of: LE and TE?

thank you very much
Hello Juan,
It may be any wood, just to hold down the LE.
LE= Leading Edge
TE= Trailing Edge.

Mar 14, 2011, 01:23 PM
Stirring the pot
johannlochner's Avatar
Quote:
Originally Posted by Sean Oelofse
Hello Juan,
It may be any wood, just to hold down the LE.
LE= Leading Edge
TE= Trailing Edge.
Are you sure....?

Johann checking to see which edge faces forward!
Mar 14, 2011, 01:24 PM
Stirring the pot
johannlochner's Avatar
Here is Fuzzy B's Vid


Fuzzy B.wmv (2 min 40 sec)


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log first scratch-build! :D ClippedWings78 Foamies (Scratchbuilt) 7 Nov 01, 2010 07:45 PM
Build Log MiG-15 in 1/10th scale for PSS: A Scratch-Build John Rood Slope 4 Sep 17, 2010 08:41 PM