-Correx Mig-7 Scratch build- - Page 37 - RC Groups
Thread Tools
Mar 02, 2011, 02:12 PM
Registered User
EATHIS's Avatar
Hi Fuzzyb,
Flipping cool colours, should look really good in thr air.
Sign up now
to remove ads between posts
Mar 02, 2011, 10:49 PM
Registered User
hi sean,

https://static.rcgroups.net/forums/a...g?d=1290176324

to this model, we did this procedure, or not? as is better? recommend that for aesthetic or performance?


thanks


Quote:
Originally Posted by Sean Oelofse
Today I made the canopy, mounted the elevator servo and closed up the back, top and bottom. The wing is now complete with two HXT900 servos.

Juan,
To mark the cut-outs to make the fuzz fit the wing, lay the fuzz on the wing. Then mark out at former F2. Cut this out about 10mm into the wing. Fit the wing and now mark out at F5. Cut this out....your wing should fit.....if not trim a little more.
Refer the pics.

Mar 02, 2011, 11:26 PM
Registered User
Quote:
Originally Posted by juan_camilo
saludos,,, que pena repsodner tan tarde, pero estos ultimos dias he estado muy ocupado... la construccion la inicio la otra semana.. por que hasta esta semana no quedo libre,,,

con respecto al plywood,, aca muchos le llaman asi.. pero entonces nos entendemos entre nosotros.. el plywood es simplemente madera contrachapada,, o tambien llamado triplex..

el correx,, es plastico corrugado,, o conocido en algunos lugares como coroplast, en home center venden blanco, negro y gris de 4mm y 2mm, pliego o medio pliego.

hasta pronto
Hola Juan, gracias por contestar. Te pregunto, que material es el del wingspar? dice yardstick o lath.... con que lo estas haciendo vos?

Otra pregunta, vos ya empezaste a armar el tuyo?no te queda facil grabar el procedimiento ?
y lo vas a hacer con motor eléctrico? cuando lo termines me compartis que electronica vas a usar? ( motor, esc, servosetc)
Last edited by daristiz; Mar 02, 2011 at 11:34 PM. Reason: a mistake in the type of motor
Mar 02, 2011, 11:32 PM
Registered User
Quote:
Originally Posted by Sean Oelofse
Today I made the canopy, mounted the elevator servo and closed up the back, top and bottom. The wing is now complete with two HXT900 servos.

Juan,
To mark the cut-outs to make the fuzz fit the wing, lay the fuzz on the wing. Then mark out at former F2. Cut this out about 10mm into the wing. Fit the wing and now mark out at F5. Cut this out....your wing should fit.....if not trim a little more.
Refer the pics.

sean, great job, what a shame that I found this Thread so late, because the video of you building that plane would have been great for us newbies .

Problably next weekend I´ll cut mi pieces ( with a laser cutter ) and hope to start trying to assemble
Mar 03, 2011, 05:47 AM
.....till the wind drops.
Sean Oelofse's Avatar
Quote:
Originally Posted by EATHIS
Hi Sean,
Your colours look superb. As you seem to get the eye-catching colours and patterns. You also trying slightly different c olur schemes. Looks REALY cool.
Sorry, but its Bretons....He must still color his Mig-7.....as must I...
Can you post the link to that aircraft designs site again so I can get some ideas.
Mar 03, 2011, 07:34 AM
Stirring the pot
johannlochner's Avatar
Yeah Sean!
Us correx newbies would like a video!!!

Bakkie will do the Go Pro footage and FB the voice over.
Heheheh...
Mar 03, 2011, 10:35 AM
Registered User
hola, yo tenia la misma duda,, sean me dijo:

A Yardstick is a piece of wood 1 yard long by 1 inch by about 3 or 4mm thick.

Un Yardstick es un pedazo de madera de 1 yarda(0,9144 metros) de largo por 1 pulgada(2,54 centimetros) por unos 3 o 4 milimetros de espesor.

no especifica que madera.. pero supongo que debe ser madera dura,, es el alma del ala...

probablemente en estos dias inicie la construcion,, pero sera un planeador,, no llevara motor.. vuelo en ladera 100%,,,

hasta pronto

Quote:
Originally Posted by daristiz
Hola Juan, gracias por contestar. Te pregunto, que material es el del wingspar? dice yardstick o lath.... con que lo estas haciendo vos?

Otra pregunta, vos ya empezaste a armar el tuyo?no te queda facil grabar el procedimiento ?
y lo vas a hacer con motor eléctrico? cuando lo termines me compartis que electronica vas a usar? ( motor, esc, servosetc)
Mar 03, 2011, 10:59 AM
Registered User
EATHIS's Avatar
http://www.bandegraphix.com/
Hi Sean,
Here is the graphics site for ideas.
Mar 03, 2011, 01:11 PM
Registered User
Fuzzy B's Avatar
Sean, any chance you might make a few more of those spinners for us?. Name your price!
Mar 03, 2011, 01:13 PM
...missing the PE Slope Rebels
Flying Beagle's Avatar
+ 1
Mar 03, 2011, 01:46 PM
Registered Loon
Blackrat's Avatar
+9 65mm diameter
Mar 03, 2011, 03:46 PM
.....till the wind drops.
Sean Oelofse's Avatar
Quote:
Originally Posted by Fuzzy B
Sean, any chance you might make a few more of those spinners for us?. Name your price!
Can do!
R50 to cover glass/resin/buckshot?
Mar 04, 2011, 12:04 AM
Registered User
Fuzzy B's Avatar
Yes thanks I'll have one !
Mar 04, 2011, 06:14 AM
...missing the PE Slope Rebels
Flying Beagle's Avatar
R50

+ 1, plus another one

spare


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log first scratch-build! :D ClippedWings78 Foamies (Scratchbuilt) 7 Nov 01, 2010 08:45 PM
Build Log MiG-15 in 1/10th scale for PSS: A Scratch-Build John Rood Slope 4 Sep 17, 2010 09:41 PM