Thread Tools
Sep 25, 2012, 10:13 AM
Inherent Tinkerer
Very true! I'm actively looking for better GCS but will probably wait for the new APs to come out since they will likely be able to be used with a number of different GCS packages. I realize the the GCS developer has moved on to bigger and better things in life and won't knock him for doing so. HK works OK for my current uses but without further development or support it's pretty much a dead horse that's not worth beating......

Jimmy
Sign up now
to remove ads between posts
Oct 11, 2012, 05:44 PM
Lift is cheap - Drag sucks
Tom Harper's Avatar
Help!

The manual says I can store WP files in the Missions folder then upload them to Atto.

I don't find a screen that recognizes the .txt files or lets me load them.

Tom
Oct 11, 2012, 09:33 PM
Inherent Tinkerer
I think what it refers to is being able to make fligh plans within the GCS and save them. I've done it successfully that way.

Jimmy
Oct 11, 2012, 10:18 PM
Lift is cheap - Drag sucks
Tom Harper's Avatar
Jimmy,

Thanks - I think that's it. I found the files in Program Files/HK/... They are a different format than standard Atto files.

I'll try the GCS tomorrow.

Thanks again,

Tom
Nov 03, 2012, 11:40 PM
Registered User

HK GCS mavlink 1.0


Does HK GCS support for mavlink 1.0 ?
Nov 04, 2012, 08:39 AM
Registered User
wartoy's Avatar
I would just be happy for a life size poster of Martin Y's avitar!
Nov 04, 2012, 10:41 PM
400' ..... NOT
Martin Y's Avatar
Quote:
Originally Posted by wartoy View Post
i would just be happy for a life size poster of martin y's avitar!
Same
Nov 09, 2012, 09:21 AM
Inherent Tinkerer
Has anyone tried the control buttons on the "Control" tab for RTL, Loiter etc with an AttoPilot? How about manual control via a joystick?

Thanks!

Jimmy
Nov 13, 2012, 01:47 PM
UAV Integrations
I suspect its not so much that HK moved on to bigger and better things....its that RCG "moderated" him to the point of leaving RCG and never coming back. Just like many, many other serious, valuable content providing RCG members in the last couple of years.
Nov 13, 2012, 01:58 PM
Inherent Tinkerer
I can't see them "moderating" people that provide content out. Content is what keeps people coming back.
Nov 13, 2012, 11:28 PM
UAV Integrations
Yep. I agree. But HK left because of the pathetic "points" system here and a total failure on RCG part to give him a valid effort at looking why or how he accrued points. Do you know who Timecop is? Or Ssassen? Even Trappy? They all left RCG because of the moderators. Or, should I say lack of moderators. And those are just the ones I know of offhand. And they were SERIOUS providers of valuable content.
Nov 26, 2012, 09:21 PM
Inherent Tinkerer
Hey, Guys.

Anyone setup the antenna tracker using the Maestro controller and a 360 degree pan servo? I can control the tilt servo with no problem but can only get the pan servo to spin in one direction or the other. Any suggestions? Do I need to go back to a normal servo?

Thanks!

Jimmy
Dec 15, 2012, 05:24 PM
Inherent Tinkerer
Anyone been able to get the antenna tracker working with the Pololu Maestro and Atto? I can calibrate the servos but it won't track....

Jimmy
Dec 15, 2013, 10:05 AM
Registered User
Hi,
I'm trying to use HK with eLeReS connected to GPS,
but i don't recive right position on google maps.



Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Show Us Your Ground Station !!!! FPV Ground Station Design and Idea's found here :) JettPilot FPV Equipment 4694 Mar 13, 2017 11:18 AM
Discussion Ground station wiring harness ziomatrixacs FPV Talk 3 Oct 07, 2010 05:48 PM
Discussion DIY Continuous Rotating FPV Ground Station Moosthegoose FPV Talk 37 Sep 29, 2010 04:27 AM
Discussion Aerial Photography request an Autopilot system & Ground Control Station Atflying Aerial Photography 7 Jun 27, 2010 02:13 AM