New Products Flash Sale
Thread Tools
Old Nov 29, 2010, 01:35 PM
FlyBoyTha1 is offline
Find More Posts by FlyBoyTha1
Registered User
FlyBoyTha1's Avatar
Quote:
Originally Posted by lovetoflyjets View Post
FlyBoyTha1 are you upgrading to a different fan and motor? Or are you parting out your f-86. Thanks.
Funding a big project
Sign up now
to remove ads between posts
Old Nov 29, 2010, 04:23 PM
lovetoflyjets is offline
Find More Posts by lovetoflyjets
Registered User
You got Jet fever. No doctor can fix it. Lot's of money makes it better.
Old Nov 29, 2010, 10:16 PM
rfodor is offline
Find More Posts by rfodor
Registered User
One more try, will a dynamav fit or is that just crazy?
Old Nov 30, 2010, 07:32 PM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
I think the Dynamax is a little big for this airframe, there is just enough room for 2 4s 4000mah packs and the 101mm fan. I am running a Wemotec 90mm on 4s, the weight will be ~7lbs and the weight will be at the max for the built up structure IMO.

Eric B.
Old Nov 30, 2010, 08:29 PM
rfodor is offline
Find More Posts by rfodor
Registered User
Thanks Eric, I kind of thought that but I wanted here it from someone that has one and uderstands the issues.

Ron
Old Nov 30, 2010, 09:16 PM
pheonixarrison is offline
Find More Posts by pheonixarrison
IDIDNTFEELATHING
pheonixarrison's Avatar
yes. i am 80% complete with this build. awesome buy and plane. retracts and intake installed. if you have any questions please feel free to e-mail me at pheonixarrison@yahoo.com and i will try to help if i can.
Old Nov 30, 2010, 11:15 PM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
Pheonixarrison,

Welcome to RC Groups, post your build we/I would like to see it for sure.

Eric B.
Old Apr 03, 2011, 06:30 PM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
Mine has flown last weekend was maiden(from grass), this weekend I flew it 3 times at the Electric Fly In at Lake Charles (LARKS). The setup is a Wemotec Midifan - Nue 1415 1.5Y - 8s 4000mah Turnigy 30c - Turnigy HV100 ESC. Flies good, docile but the cg is a bit forward from where it needs to be and so I will have ot work on that in the coming weeks.

Eric B.
Old Apr 03, 2011, 10:12 PM
X30PILOT is online now
Find More Posts by X30PILOT
Registered User
X30PILOT's Avatar
Eric,

Thank you for the flight report. Please let us know where your C/G ends up.

X30
Old Apr 04, 2011, 08:46 PM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
Quote:
Originally Posted by X30PILOT View Post
Eric,

Thank you for the flight report. Please let us know where your C/G ends up.

X30
I marked a CG on the wings at 7 inches from leading edge. IIRC that this came from a thread here on RCG. Its obviously a safe CG and I am 1/2" in front of that(~6.5 inches from leading edge). I am going to work that backwards till I am at the mark.

Eric B.
Old Apr 09, 2011, 07:15 PM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
Fifth flight today in 15-20 knot winds. The plane handles it no problem and still working on the CG. The CG today was moved back closer to 7inches from the leading edge, the elevator was much more effective allowing me to raise the nose more to slow it down on landing. Hoping for less wind then I will be able to tell more about the CG, I do know it is still pretty far forward of where it needs to be.
The Midi/Nue 1415 1.5y 8s combination works very well indeed, flew low over the runway at 1/2 throttle, peg the throttle and let it accelerate a little then raise the nose to vertical and climb straight up as long as you want. Certainly not the performance of the full scale F86 but fun anyway...


Eric B.
Last edited by AirX; Apr 09, 2011 at 07:21 PM.
Old Apr 09, 2011, 10:48 PM
Boogie_ is offline
Find More Posts by Boogie_
Cajun-American
Boogie_'s Avatar
Yeah, that thing really hauls the mail. Can't believe y'all were out flying in this wind today.
I was supposed to get some stick time on her last weekend.

hehehe, just kidding.
Too much going on at the fly-in to get it all done. I think the Hun was the only plane I flew twice.
We might make it over to Houston this month, might take it for a spin then.

BTW - The F-100 is repaired and in primer. Should have it painted this coming week.


Julian
Old Apr 10, 2011, 10:25 AM
AirX is offline
Find More Posts by AirX
EDF rules... :)
AirX's Avatar
Quote:
Originally Posted by Boogie_ View Post
Yeah, that thing really hauls the mail. Can't believe y'all were out flying in this wind today.
I was supposed to get some stick time on her last weekend.

hehehe, just kidding.
Too much going on at the fly-in to get it all done. I think the Hun was the only plane I flew twice.
We might make it over to Houston this month, might take it for a spin then.

BTW - The F-100 is repaired and in primer. Should have it painted this coming week.


Julian
Hi Julian,

Sorry about that. I clean forgot, anyway now that I have adjusted the CG it lands a lot slower than the CG placement I had at the flyin.
Come on down and fly it....
The wind does not seem to bother it a bit.
I hope to get a few more 4 cell packs in the next few weeks.

Cool, great to hear the F100 is repaired, definitely bring that airframe as the club memebers are warbird freaks...

Eric B.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale 70mm Shulman Aviation Aluminum Electric Ducted Fan Package Fan/Motor viperjody Aircraft - Electric - Jets (FS/W) 6 Dec 12, 2010 05:42 PM
Wanted WANTED A starter wand for a Byron Ducted Fan F-16 with the Dynamax fan, mechengineer03 Aircraft - Fuel - Jets (FS/W) 1 Oct 12, 2010 02:41 PM
Discussion Nitroplanes F86 49" Wingspan Thrust Help DEdwards Electric Ducted Fan Jet Talk 10 Sep 24, 2010 01:51 PM
Discussion 101mm (4") EDF source, Nitroplanes 49" F86 DEdwards Electric Ducted Fan Jet Talk 6 Sep 11, 2010 04:13 PM
Question Hobbypartz.com 101mm Electric Ducted Fan Unit, anyone? F7X Electric Ducted Fan Jet Talk 2 Feb 12, 2010 08:03 AM