Thread Tools
Oct 26, 2012, 04:27 PM
Registered User
Quote:
Originally Posted by elvill
anyone got link on which screws to replace pinion gear, dont have manual. finally gonna replace after many packs have 1st issue, with throttle motor rpms but seems like pinion slipping/loose...
On the Atomik web site, look for part 10013. I hope this helps!
Sign up now
to remove ads between posts
Oct 26, 2012, 04:30 PM
Registered User
Hey guys! I just wanted to drop you a note that the eGyro kits were out of stock earlier today but we just checked more inventory in. We've been adding them to the system as we run them through a quality control check. They should be active on the site right now!
Oct 26, 2012, 06:25 PM
Registered User
Big thanks to the Atomik C/S crew for taking the extra time and phone calls to get my e-gyro preorder sorted and shipped. Still the best customer service department in the industry.
Oct 27, 2012, 11:23 AM
Registered User
Quote:
Originally Posted by cwazyduck
Big thanks to the Atomik C/S crew for taking the extra time and phone calls to get my e-gyro preorder sorted and shipped. Still the best customer service department in the industry.
Thanks Cwazy! You don't know how much comments like that mean to us over here. We try our hardest to take care of each customer the way we would want to be treated and it's comments like yours that keep us going!
Oct 27, 2012, 04:13 PM
Registered User
Quote:
Originally Posted by ATOMIKRC
Thanks Cwazy! You don't know how much comments like that mean to us over here. We try our hardest to take care of each customer the way we would want to be treated and it's comments like yours that keep us going!
Talked to Jason at Atomik and put the order through for a few gyros and all looks good now. Thanks Jason and Atomik. Hope everyone has theirs soon. Racing here we come.
Oct 27, 2012, 05:15 PM
build, fly, crash...repeat
marksp's Avatar
One benefit to living fairly close to Venom/Atomik HQ is stuff gets here quickly





Guess what I'm doing tonight?

BTW, the new rear tire & sprocket was totally unexpected! Thanks Atomik!

Cheers
Last edited by marksp; Oct 27, 2012 at 06:56 PM. Reason: typo
Oct 27, 2012, 06:27 PM
Registered User
Quote:
Originally Posted by marksp
One benefit to living fairly close to Venom/Atomik HQ is stuff gets here quickly





Guess what I'm doing tonight?

BTW, the new rear tire was totally unexpected! Thanks Atomik!


Cheers
Wow a new tyre and insert I presume, cool.
Have fun.
Oct 28, 2012, 12:13 AM
Registered User
I hope my order will include the new tire too. Have fun!
Oct 28, 2012, 07:50 AM
MY '75 CZ "FALTA REPLICA" 2010
TopDave's Avatar
Quote:
Originally Posted by marksp
One benefit to living fairly close to Venom/Atomik HQ is stuff gets here quickly





Guess what I'm doing tonight?

BTW, the new rear tire & sprocket was totally unexpected! Thanks Atomik!

Cheers
That is awsome of Atomik to have the wheel, sprocket, tire and E-gyro assembled and ready to drop in for you!! Now that's some great customer GOODWILL right there!! Or did Christmas come early!
Oct 28, 2012, 11:32 AM
dammachines
Quote:
Originally Posted by marksp
One benefit to living fairly close to Venom/Atomik HQ is stuff gets here quickly


Guess what I'm doing tonight?

BTW, the new rear tire & sprocket was totally unexpected! Thanks Atomik!

Cheers
Just wondering - in your picture I see the wires coming from the other side of the wheel to the ESC. Are there bullet connectors between the wheel and ESC?
Oct 28, 2012, 11:58 AM
build, fly, crash...repeat
marksp's Avatar
Quote:
Originally Posted by dmincin
Just wondering - in your picture I see the wires coming from the other side of the wheel to the ESC. Are there bullet connectors between the wheel and ESC?
No, it appears that the wires are soldered. I was hopeful to have the wheel easily disconnected from bike so I can quickly switch between off-road and on-road setups.
Oct 28, 2012, 04:37 PM
Registered User
Quote:
Originally Posted by marksp
No, it appears that the wires are soldered. I was hopeful to have the wheel easily disconnected from bike so I can quickly switch between off-road and on-road setups.
You can solder bullet terminals in place. I have done that. Makes life easier. Just make sure you don't mix the wiring up and cover the conections with heatshrink. The gyro will spin backwards.
Oct 28, 2012, 04:52 PM
dammachines
Quote:
Originally Posted by chktm
You can solder bullet terminals in place. I have done that. Makes life easier. Just make sure you don't mix the wiring up and cover the conections with heatshrink. The gyro will spin backwards.
Yeah - just asking because at one point we thought that might be the hold up on the release of the kit, but I guess not...
Oct 28, 2012, 05:16 PM
Registered User
Quote:
Originally Posted by dmincin
Yeah - just asking because at one point we thought that might be the hold up on the release of the kit, but I guess not...
I think that was the hold up of the MM release as they had plugs in the wiring and they were failing I think. The wiring adapters ( for speedo to speedo ) were supposed to be the reason the gyro was running late.
Oct 28, 2012, 11:08 PM
Registered User
UFRC's Avatar

e gyro


Great to see Atomik are providing great customer service as well as much needed answers ect on these forums,that goes a long way with word of mouth,.......................I am in Australia and need an E Gyro asap anyone steer me in the right direction please?i saw two wheel hobbies on holidays and wont be back till november some time,no listings on ebay australia,do atomik ship to aus?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion HoobyKing new dirt bike vs. venom vmx 450 amitgv1 Motorcycles 19 Oct 13, 2010 11:09 AM
Discussion Duratrax DX450 VS. Venom VMX 450 Butters Motorcycles 31 Mar 18, 2010 03:41 PM
Discussion VMX 1/4 Scale Dirt Bike Venom Media Venom 4 Mar 01, 2010 06:41 PM
Discussion Venom VMX 450 MX Bike! Mark Headling Motorcycles 2 Feb 09, 2010 11:44 AM
Discussion The Original 1/4 Scale RC nitro dirt bike from the 70's Magicd1 Motorcycles 6 Oct 02, 2006 02:06 AM