camera signal causes "zoom in" effect on FOxtech CE OSD 1.2 AV OUT signal - RC Groups
Thread Tools
Oct 26, 2010, 02:48 PM
Registered User

camera signal causes "zoom in" effect on FOxtech CE OSD 1.2 AV OUT signal

When I turn my GoPro HD camera on the TV OUT composite standard Video signal connected to OSD AV IN causes a partial ZOOM IN effect on OSD AV OUT signal resulting in some of the info displayed at the bottom of the screen to get cut off . Does anyone know what causes this and if there is a solution ? BOth camera and OSD signals look perfect when viewed on my 19" TV independantly but connected to CE OSD 1.2 the OSD "spreads out".
Sign up now
to remove ads between posts
Oct 27, 2010, 03:24 AM
Registered User
oded mazor's Avatar
sometimes it happends to me as well when using the Sony Bloggie HD camera. I usually solve it by disconnecting the battery and re-connecting it. usually it solves the problem.

if you search this forum, You'll find that this problem was raised in this forum and the guy at foxtech wrote that the CEOSD and GOPRO don't match very well...

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
FAQ CE OSD displays MAX stevessub27 FPV Talk 2 Oct 13, 2010 11:14 AM
Discussion Help with CE OSD nathan089 FPV Talk 2 Oct 05, 2010 11:41 AM
Yippee! Fauvel AV 22, camera on board in HD jeanclaude Sailplane Talk 9 Apr 02, 2010 01:54 PM
Help! Black Widow Av Digi-Live and camera Zoom Fossil1977 Aerial Photography 5 Jun 07, 2009 09:10 PM