Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 24, 2010, 09:35 PM
Stamp is offline
Find More Posts by Stamp
Visit My Blog
Stamp's Avatar
Discussion

Removing mixing AND mixing only 2 channels-Esky 6ch radio


Hi guys,

Is there a way to remove the mixing from an Esky Honey Bee King3 6ch radio? Basically the 6 channel model they have. (ET6I tx and EK2-0424 rx).

When I increase throttle the servos move (as they should in a heli). I want to use this radio for a plane project.

Any links, help appreciated.

Jim
Last edited by Stamp; Oct 24, 2010 at 11:57 PM.
Sign up now
to remove ads between posts
Old Oct 24, 2010, 11:20 PM
radialarm is offline
Find More Posts by radialarm
Stinger!
radialarm's Avatar
Look under the batteries. If can see a switch through a hole in the case on the circuit board then unless I'm mistaken it will remove the helicopter mix so the Tx can be used for planes.
Old Oct 24, 2010, 11:22 PM
Stamp is offline
Find More Posts by Stamp
Visit My Blog
Stamp's Avatar
Yes thank you that worked.
Is there a way to mix only two channels?

Jim
Old Oct 24, 2010, 11:29 PM
Daedalus66 is online now
Find More Posts by Daedalus66
60 years of RC flying
Daedalus66's Avatar
Quote:
Originally Posted by Stamp View Post
Yes thank you that worked.
Is there a way to mix only two channels?

Jim
Which channels? Elevon? V-tail? Maybe.
Old Oct 24, 2010, 11:39 PM
Daedalus66 is online now
Find More Posts by Daedalus66
60 years of RC flying
Daedalus66's Avatar
Quote:
Originally Posted by Stamp View Post
Yes thank you that worked.
Is there a way to mix only two channels?

Jim
Which channels? Elevon? V-tail? Doesn't look like it. There are only two switches. The following may help.

How to disable CCPM from E-sky transmitter (2 min 23 sec)


http://helifreak.com/showthread.php?p=2063134
Old Oct 24, 2010, 11:51 PM
Stamp is offline
Find More Posts by Stamp
Visit My Blog
Stamp's Avatar
I need the two servos that control elevator to move in the same direction and in opposite directions depending on where the sticks are.
Already flipped the dip switches. That solved the issue with the servos moving with the throttle.

Jim
Old Oct 25, 2010, 12:11 AM
radialarm is offline
Find More Posts by radialarm
Stinger!
radialarm's Avatar
I don't think that can be done with this radio. You might be able to do it with a seperate "V"tail mixer. What info I gave you is all I know about that radio. You might check hobbypartz for a Flysky CT6B 6 channel radio for $32 free shipping. It will do what you want.
Old Oct 25, 2010, 08:36 AM
Daedalus66 is online now
Find More Posts by Daedalus66
60 years of RC flying
Daedalus66's Avatar
Quote:
Originally Posted by Stamp View Post
I need the two servos that control elevator to move in the same direction and in opposite directions depending on where the sticks are.
Already flipped the dip switches. That solved the issue with the servos moving with the throttle.

Jim
It isn't clear what you want to do, but it's obvious that this radio won't do it. It has just two basic options: helicopter mixing or no mixing.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Old Esky Honeybee 2 CP 6ch, servos moving by themselves. stoneruk Electric Heli Talk 7 Sep 14, 2010 03:01 PM
Sold ESky 6ch 2.4Ghz Radio Sytem (Tx, Rx, ESC and 2 servos from Belt CP V2) $40 shipped nuttcaze Aircraft - General - Radio Equipment (FS/W) 4 Apr 17, 2010 08:40 PM
Sold Esky 6ch Heli radio and rx PPM $25 shipped fixed3d Aircraft - General - Radio Equipment (FS/W) 0 Oct 30, 2009 02:40 AM
For Sale ESKY 6ch helicopter radio - Honey Bee King - Off Site viprvette Aircraft - General - Radio Equipment (FS/W) 0 Oct 05, 2007 09:24 AM
For Sale Esky 6ch heli radio with crystals #33 (from honeybee cp2) SPCustoms Aircraft - General - Radio Equipment (FS/W) 4 Mar 21, 2006 09:28 PM