Parkzone P47 - Page 865 - RC Groups
Thread Tools
Oct 14, 2012, 12:32 PM
Has Sloped Off
dav3uk's Avatar
Ducati Mechanic here are mine..

PZ P47 Retracts (0 min 18 sec)
Sign up now
to remove ads between posts
Oct 14, 2012, 01:25 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
Quote:
Originally Posted by 325FGP
Inner doors are looking good DM. But this warbird should get a 40's pinup... just sayin....

Girls were a bit slutier in the 50's... I knew I was going to get called out on that..

Quote:
Originally Posted by dav3uk
Ducati Mechanic here are mine..

http://www.youtube.com/watch?v=N3adMwK-Gs0

Those look great!! Nice fit job!
Oct 14, 2012, 01:39 PM
Should've, Would've, Could've
v8truckin's Avatar
nice job on the gear door bro!
Oct 14, 2012, 02:22 PM
I can fix it.
nageotte's Avatar
Are there any bkogs for doing this? What are the doors made from?
Oct 14, 2012, 10:16 PM
Registered User
scoobiemario's Avatar
Few pics from day at the field:

Gabreski is getting ready to bust some Nazis:







Oct 14, 2012, 10:44 PM
Registered User
Quote:
Originally Posted by skypan12

Let me ask the question here about the Power 32 also like earlier asked would the power 32 be a good / practical choice for this ship? would it bolt right up? would it be to long in length ? would it be to heavy? any neg feedback on it other than may be just to much motor (if there is such a thing) as it will do 50 amp continuos with 60amp burst for 15 sec.


I run a power 32.. I got rid of the motor mount and bolted the motor straight to the fire wall.. I set the cowl back about half a inch... It fits great.. Also helps with CG being farther back..

I run 60amp ESC and 4s.. 12x10 prop.. Its a total animal!!.. Just a lil tough to get in the air with tq of the motor pulling it to the side so bad.. But once up it flies like a dream.. as much power as you want at any time any where..... will disappear into the clouds.
Oct 15, 2012, 12:01 AM
Some.. call him Tim...
Ducati Mechanic's Avatar
Quote:
Originally Posted by scoobiemario
Few pics from day at the field:

Gabreski is getting ready to bust some Nazis:








That looks great! What paint did you use?
Oct 15, 2012, 12:35 AM
Registered User
Quote:
Originally Posted by kingleh
I run a power 32.. I got rid of the motor mount and bolted the motor straight to the fire wall.. I set the cowl back about half a inch... It fits great.. Also helps with CG being farther back..

I run 60amp ESC and 4s.. 12x10 prop.. Its a total animal!!.. Just a lil tough to get in the air with tq of the motor pulling it to the side so bad.. But once up it flies like a dream.. as much power as you want at any time any where..... will disappear into the clouds.
Thanks for the feedback on that, I really want to run the HL 4-blade on mine, were there any mods to the firewall to get the P32 to bolt to it? or did it bolt to the holes that the plastic motor mount was using to hold it to the firewall?

One other thing what size 4S pack are ya running and what kind of run time? I am not an WOT guy and practice good throttle management most of the time
Last edited by skypan12; Oct 15, 2012 at 12:46 AM.
Oct 15, 2012, 12:49 AM
Shut up and fly
papabatman's Avatar
Quote:
Originally Posted by kingleh
I run a power 32.. I got rid of the motor mount and bolted the motor straight to the fire wall.. I set the cowl back about half a inch... It fits great.. Also helps with CG being farther back..

I run 60amp ESC and 4s.. 12x10 prop.. Its a total animal!!.. Just a lil tough to get in the air with tq of the motor pulling it to the side so bad.. But once up it flies like a dream.. as much power as you want at any time any where..... will disappear into the clouds.
sweet about 90mph on a 5s
Oct 15, 2012, 09:56 AM
Has Sloped Off
dav3uk's Avatar
Quote:
Originally Posted by nageotte
Are there any bkogs for doing this? What are the doors made from?
This was the exact curve of the underside of the wing, was grey to start with and the same plastic as the supplied doors on the legs.....

In the UK supplied as Halfords touch up paint set for cars.

Hinges were ready made flap hinges I had in stock from years ago.

Doors are 'sprung' open by a thin piece of elastic through the fuz and the doors pull them shut in the same way as in the picture above of the larger P47 model

All painted with a Sharpie sliver paint pen.

Cost me nothing to do and look real cool.

I now have some spare door sequencers from my eRC B25 as its now a slope soarer.... so may use them to make it even more realistic.

Dave
Oct 15, 2012, 12:10 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
Scoob has truly inspired me to stay the corse, and change the look.. That looks great.

At the LHS I picked up Red,flat black, and silver foam safe, "Testors" paint..I tested out the silver by repairing, and blending the area where the decals were, and the match is perfect! Now that the base coat is fixed I can get creative.

A good Tip: After I use a spray can, I remove the sprayer and flush it in a small cup of lacquer thinner. The next time you use the can it will spray just as good as the first time.
Last edited by Ducati Mechanic; Oct 15, 2012 at 12:22 PM.
Oct 15, 2012, 12:48 PM
AIMDROIX
DaxFX's Avatar
scoobiemario
that paintjob is the best so far, that is just awesome !!
Oct 15, 2012, 02:05 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
So far.. I hope mine looks half as good!

Three more, and that's it for today.. Cowl ring is done..
Last edited by Ducati Mechanic; Oct 15, 2012 at 02:29 PM.
Oct 15, 2012, 03:08 PM
Registered User
what paint did you use for the cowl ring?
Oct 15, 2012, 03:18 PM
Some.. call him Tim...
Ducati Mechanic's Avatar
Quote:
Originally Posted by skypan12
what paint did you use for the cowl ring?

I used Testers "Foam Safe" spray, the same Paint Ill be using on the Tail.. Bright Right.. I wanted them to match, and Im pleasantly surprised how glossy the foam safe paint looks on the cowl.

I just ordered pinup girl decals.. Red head wearing red Leather..


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion World Models p47 1.20 dards Fuel Warbirds 1 Oct 20, 2010 11:55 AM
Discussion E-Flite P47 or Parkzone Corsair?? Gobstopper Electric Warbirds 13 Dec 02, 2009 10:37 PM
Discussion New Parkzone p51 or Greatplanes P47 casedit Electric Warbirds 5 Sep 01, 2009 10:08 AM