Got a 10x10 prop on the JUG with the Power 32 motor running 4s.. Tried to get it in the air today but didn't get a chance.. Had been running a Extra 300 prop so looking forward to see the difference.. I will let yall know how she does..

Originally Posted by kalmon

Can you post a little description on how you did the inner doors and the tailwheel retract? Those are two things I want to do to mine.

-Brian

if you go to youtube & type in (parkzone p-47 tailwheel retract) it will show how others have done it. also the inner gear doors. i'd post the link, but i dont know how. soory it took so long to get back to you.

Originally Posted by gchrisgo34

if you go to youtube & type in (parkzone p-47 tailwheel retract) it will show how others have done it. also the inner gear doors. i'd post the link, but i dont know how. soory it took so long to get back to you.

No problem, It is going to be a winter project for me.

-Brian

Originally Posted by UniDaHero

I was happy as a dog with a 22oz T-Bone with the xtra prop and I know that everyone says the 10x10 is a great prop but this guy swore by the 12x6E against all other props so I tried it for the heck of it. I have about 30 flights so far and it is just awesome! I will try the 10x10 and see how it compares but my goodness I just can't see this thing going any faster!

the 12x6 is going to be slower than the 10.5x9, 9x9, 8x8, 11x8 etc.... You have thrust (a lot of vertical, prolly a whole lot) but that's it.

This looks like a nice little winter project for me well looks like I have lots of reading to do now, Subscribed!

I ordered the aluminum motor mount four my Torque 820kv, and I grabbed one of these Scale four blade 11x10 variable pitch props from hobby lobby.. Very cool look. Should be a a blast on 4s!


http://www.hobby-lobby.com/scale_4_b...18581_prd1.htm

Ducati you are going to need this
http://www.hobby-lobby.com/prop_adap...18586_prd1.htm
or you can do what i did and redrill the hole

JDM,

Thanks, but the 5 mm I need is out of stock. I think I can make do with what I have, I'm planning on mounting it with a solid mount, and drill out the prop hub. Rather than pushing the shaft threw the motor, and running a collet adapter. Either way I have a collet adapter that came with my torque motor. I believe that will work, If I decide to go that route.

Thanks again! My whole kit is still in the mail, I'll know more when I get my hands on it, and the motor mount.

is there a particular retract that is working well for the mains?

eflite 10-15 work great with prebent struts

After several years in this great hobby I discovered the e-flite P-47. Great scale flyer that has me reliving the successes of the US of the 1940's, making machine gun noises while making strafing runs. If I need help than so do most of you. No apologizes accepted.

Originally Posted by jdm2ner

eflite 10-15 work great with prebent struts

Great Thanks trying to get a list together now to get everything at one time and just do all the mods at once, Retracts, Flaps 4-blade prop.

I thought I read somewhere here about a razor back conversion? will have to do a search on that one unless someone has a link to it and where to get it for this little bird, sure like the looks of the razorback over the D.

Parkflyer plastics for the Razor conversion.

Originally Posted by quitcherbitchen

Parkflyer plastics for the Razor conversion.

Thanks will look them up now

just want to make sure when going with the Power 25 motor and the HL 4-Blade prop is the 870Kv motor the one to get? and the metal motor mount?