Parkzone P47 - Page 851 - RC Groups
Thread Tools
Sep 20, 2012, 10:58 PM
Registered User
JDMJim's Avatar
Got a guy that showed up with a Wildcat using Habu running gear last weekend....now that was cool!
Sign up now
to remove ads between posts
Sep 20, 2012, 11:07 PM
2 many planes & 2 little time
scootrb4's Avatar
Quote:
Originally Posted by kingleh
Well just flew my Thunderbolt with new setup.!!!... I have not seen alot of RC planes fly because i am semi new to the hobby.. But this thing is pretty awesome and smokes anything i have seen fly on power, speed and climb...

I went big with the E-Flight Power 32, 60amp ESC and 2500mah 4cell 30c.. Paired with a Extra 300 prop.. I plan to try a 10x10 prop next and will see what my amp is.. I think it should be fine though..

Man this thing is a beast in the sky.. Covers some ground very quickly..

Here is a lil vid my buddy took..

http://youtu.be/2Fm4Ptgj-7Y


old VS new




I just bolted the motor mount to the firewall and got rid of the original plastic spacer..



This setup is a bit shorter then stock but i thought that would help the CG.. I trimmed the underside of the cowl a little and pushed it back about 6 or 7mm.. You can see the original screw holes still..




I located the ESC as far back as possible also and "bridged" it across for cooling..



In the end the CG came out very close and when i add flaps that should help also... I have the E-Flight retracts and they are very sweet!!!


SWEET low pass there. What prop are you running with the G32?
Sep 20, 2012, 11:41 PM
St. Louis
Foambird's Avatar
The Eflite retracts are terriic, no apologies.
They are not quite "drop-in" and need to be carefully adgusted but once dialed in they are the way to go.
Sep 21, 2012, 05:50 AM
The sky is my playground.
Dora Nine's Avatar
What's needed for to mount the H-L four blade prop to the Power 25? Anything extra?
Sep 21, 2012, 06:10 PM
Registered User
King that thing really rips! I can't believe how fast it climbs into the clouds.
Sep 22, 2012, 09:43 AM
flying is everything
jdm2ner's Avatar
to many pages to read what do i need to to convert it to a 4 blade prop and what prop?
Sep 22, 2012, 02:11 PM
Registered User
Quote:
Originally Posted by scootrb4
SWEET low pass there. What prop are you running with the G32?
ExTRA 300
Sep 22, 2012, 02:12 PM
Registered User
Quote:
Originally Posted by jtaylor996
Just make sure you have enough down and right thrust without that plastic motor mount. You may need some shim washers.
The firewall has the slant for the thrust balance.. The motor mount was symmetrical..
Sep 22, 2012, 05:33 PM
Registered User
ufale's Avatar
I am working on putting electronics in a new P 47 airframe. I am using this setup: extra 300 prop, eflite power 25, and castle ice 50 amp, 3s 2650 40c (for now). I got the following numbers: 33.9 amps and 400 watts. I ordered the Hobby Lobby 4 blade, and I think it should be well within the limits of my esc.
Sep 22, 2012, 11:22 PM
2 many planes & 2 little time
scootrb4's Avatar
Quote:
Originally Posted by ufale
I am working on putting electronics in a new P 47 airframe. I am using this setup: extra 300 prop, eflite power 25, and castle ice 50 amp, 3s 2650 40c (for now). I got the following numbers: 33.9 amps and 400 watts. I ordered the Hobby Lobby 4 blade, and I think it should be well within the limits of my esc.

Research your motor and see what the amperage limit is.
Sep 23, 2012, 09:05 AM
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by scootrb4
Research your motor and see what the amperage limit is.
Power 25 870kv:
Continuous Current: 31 - 40A
Maximum Burst Current: 44A (15 sec)

-Brian
Sep 23, 2012, 09:31 AM
2 many planes & 2 little time
scootrb4's Avatar
Quote:
Originally Posted by kalmon
Power 25 870kv:
Continuous Current: 31 - 40A
Maximum Burst Current: 44A (15 sec)

-Brian
ufale wrote = I got the following numbers: 33.9 amps and 400 watts. I ordered the Hobby Lobby 4 blade, and I think it should be well within the limits of my esc.


I was thinking the 4 blade may bring the amperage draw above acceptable levels for this motor?
Sep 23, 2012, 09:42 AM
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by scootrb4
ufale wrote = I got the following numbers: 33.9 amps and 400 watts. I ordered the Hobby Lobby 4 blade, and I think it should be well within the limits of my esc.


I was thinking the 4 blade may bring the amperage draw above acceptable levels for this motor?
I agree, I just posted the specs for it.

Actually the Power32 770kv would probably be the best choice. Only 10g heavier and rated for 50amps continuous and 60amps burst.

-Brian
Sep 23, 2012, 10:40 AM
QuAd FaNaTiC
Razors edge 29's Avatar
Mine isn't built yet

I am waiting in parts

Ordered p15

40 amp EsC

Extra 300 prop

And full metal digital servos

Will be using flaps as well on an external ubec
Sep 23, 2012, 11:11 AM
flying is everything
jdm2ner's Avatar
well i just bought this p47 yesterday. got the eflight retracts and installed the flaps using hs65 thaywork great. i also bought he razor back ki and the hobby lobby 4 blade waitting on those to come in


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion World Models p47 1.20 dards Fuel Warbirds 1 Oct 20, 2010 11:55 AM
Discussion E-Flite P47 or Parkzone Corsair?? Gobstopper Electric Warbirds 13 Dec 02, 2009 10:37 PM
Discussion New Parkzone p51 or Greatplanes P47 casedit Electric Warbirds 5 Sep 01, 2009 10:08 AM