Thread Tools
Oct 19, 2010, 11:38 PM
Registered User
tallflyer's Avatar
Build Log

EPP f3P Plane


This will be the official thread for my New EPP F3P Plane

Video attached
EPP F3P Pattern Plane (1 min 38 sec)


Plans can be ordered from my website at for just $3.99

http://www.sdparkflyers.com

Below is also a list parts and items used to build this plane.

Parts list for a EPP F3P Kit

1. sheet 24 x 36 1.3# 6mm epp white foam
1. 40" x 3mm carbon rods or tubes
3. 3.7g Ultra Micro Servos
1. 1400kv Micro brushless outrunner
1. GWS 8043 Slofly prop
1. prop saver + bands
1 set Dubro micro pushrods (20-30") version
2 sets dubro quick connects
1. 1/8" Plywood Motor mount
2. sets dubro micro horns
1. sheet of lightply 16th inch thick
1 roll strapping tape
1. 9-10 amp brushless esc
1. box #11 x-acto blades
1. medal straight edge (18-24 inch)
sharpie pens for color
5 minute epoxy
hot glue gun with low temp sticks
battery used is 7.4 volt 360 mah is what I use. (hobby City)
1 small 4 channel receiver (I use the gws 4 channel)
1 transmitter.

(I will list parts that order from Hobby City as these plans are being downloaded from around the globe and Hobby city ships most places)

for those of you living in the USA I will post a link to my webstore for parts and accessories also.
Last edited by tallflyer; Jan 06, 2011 at 02:46 PM.
Sign up now
to remove ads between posts
Nov 02, 2010, 07:49 PM
3Disaster
nerdc0re79's Avatar
cg?
Nov 02, 2010, 08:46 PM
Registered User
tallflyer's Avatar
The CG as seen in the video when Im flying is about 1" in front of the spar.

I will double check for you.
Latest blog entry: Yunnec Typhoon H Review
Nov 04, 2010, 01:58 PM
Registered User
tallflyer's Avatar
More raw footage of my F3P plane

Raw video of my 6mm EPP F3P plane (2 min 43 sec)
Latest blog entry: Yunnec Typhoon H Review
Dec 08, 2010, 06:33 AM
WHERE NO ONE HAS GONE BEFORE
lonergb's Avatar
You did not tell us the most important data: THE FLYING WEIGHT
Dec 08, 2010, 12:50 PM
Registered User
tallflyer's Avatar
AUW! is a little under 7oz I think I will throw it on the scale tonight after work!
Latest blog entry: Yunnec Typhoon H Review
Dec 09, 2010, 03:28 PM
Registered User
tallflyer's Avatar
Ok so I put it on the scale last night and the plane without battery is 5.0oz so the flying weight with 2 cell 350mah is at 6.7- 6.9oz.
Latest blog entry: Yunnec Typhoon H Review
Dec 14, 2010, 07:13 PM
Registered User
Thanks SD Parkflyers. Easy build love it. I made it out of 9mm EPP and 3mm carbon tube in the wing and horizontal stab. Other than that, I used an alternate motor mount.

Some obligatory indoor hovering.
F3P 9mm EPP (1 min 46 sec)
Last edited by sims76; Dec 15, 2010 at 08:02 AM.
Dec 14, 2010, 09:41 PM
Registered User
tallflyer's Avatar
sims76

Thanks for sharing this has to be one of the most stable planes I have every designed
plane will track straight and holds a hover nice.

Thanks again for sharing
Latest blog entry: Yunnec Typhoon H Review
Dec 18, 2010, 02:08 PM
Registered User
First attempt at in-flight video using keychain cam.

Tallflyer's www.sdparkflyers.com F3P (3 min 52 sec)
Mar 30, 2011, 11:18 PM
Registered User
orangepeal's Avatar
Quote:
Originally Posted by tallflyer View Post
The CG as seen in the video when Im flying is about 1" in front of the spar.

I will double check for you.
Hey Robert. I enjoyed building and painting this plane! It's my 3rd EPP build in about a month and I think I'm getting the hang of it. Before I decide where to put the electronics, I was hoping you could confirm the recommended CG is about where you indicated above. Here's some pics of my build . . . . Thanks !!
Mar 30, 2011, 11:59 PM
Registered User
tallflyer's Avatar

CG Location


I used your drawing to make a mark on your photo to show you a good place to set you cg,

Since you have not installed any hardware you might even go with a dual aileron servo setup!
Latest blog entry: Yunnec Typhoon H Review
Mar 31, 2011, 12:18 AM
Registered User
orangepeal's Avatar
Thanks Robert. I was thinking of using 2 aileron servos--I'll probably use HXT500s all the way around.

Best,

Ed
Feb 28, 2012, 02:32 PM
When in doubt, gas it!
KTMRacr's Avatar
What is the wingspan on this thing?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion HK Cessna 182 Micro plane EPP Telechat Micro Ready-to-Fly 6 Oct 16, 2010 10:01 AM
Discussion New EPP FPV plane catamar FPV Aircraft 9 Oct 12, 2010 05:29 PM
Build Log The New ULD EPP-DEPRON Durable F3P plane kit tallflyer Foamies (Kits) 17 Mar 25, 2009 03:22 PM
Discussion E-foamies.com EPP F3P Plane 3d_Crazy Indoor Pattern/F3P 15 Aug 20, 2006 09:37 PM
Idea EPP F3P Practice Plane? 3d_Crazy Indoor Pattern/F3P 26 Feb 15, 2006 10:34 AM