Mamo Models VPP Help - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 18, 2010, 11:19 PM
Pat Nguyen
Help!

Mamo Models VPP Help


I have the perfect setup for this vpp unit.
Hacker A20-34s
Thunderbird 9 ESC
Dualsky 300 45c Batteries
Yak 55m
But the motor mount failed a while back and I broke and lost the lever and the bearing. So I'm thinking of doing the direct servo as the lever. Where would be a good place to get the right sized bearing? I've already tried bocabearing but they we on backorder. Thanks

-Pat Nguyen
Sign up now
to remove ads between posts
Oct 19, 2010, 04:02 AM
Inspired by the wings of an An
Andycap's Avatar
You broke the mount

Have a look at the micro heli spares, bound to be a bearing to suit there.

I have a drawing for a mount and direct servo control if you need it

Andy
Oct 19, 2010, 06:05 PM
Pat Nguyen
It'd be great if you could send me the drawing. Thanks

-Pat Nguyen
Oct 20, 2010, 04:39 AM
Inspired by the wings of an An
Andycap's Avatar
No Problem Pat.

The mounting lugs are shown 5mm wide as the mount is designed for an EPP Nose

Andy
Oct 20, 2010, 06:25 PM
Pat Nguyen
Thank you! Now all I gotta do is find a bearing.
Oct 20, 2010, 09:08 PM
departure from controlled flt
airportdog's Avatar
The pitch bearing is an M1.5x4 (x2 wide).

I would guess this one should work fine.....
http://www.helidirect.com/abec3-bear...pcs-p-2126.hdx


--
Larry
Oct 20, 2010, 09:29 PM
Pat Nguyen
Thank you soooo much!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold Mamo Models Upside-down VPP Prop Jeff Pfeifer Aircraft - Electric - Power Systems (FS/W) 5 Jun 04, 2010 07:21 PM
Discussion Anybody have the Mamo VPP instructions ? heffalump 3D Flying 2 Apr 17, 2007 03:02 PM
For Sale Mamo Models VPP j_z_123 Aircraft - Electric - Power Systems (FS/W) 2 Mar 27, 2007 09:07 PM
Discussion Mamo VPP system - is it any good ? heffalump 3D Flying 1 Jan 26, 2007 05:16 AM