New Products Flash Sale
Thread Tools
Old Feb 24, 2011, 12:37 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
I sold my original fan assy to Par 18 to help him get his Falcon into the air because he was short on time.

Of course this left my Falcon without a fan. I've been thinking about doing a glass nacelle for the 4.5" fan since it is working so well on the Falcon.

I was in Walmart the other day and there it was sitting on the shelf with a $10
price tag. It was a ready-made 4.5" fan nacelle plug. I never knew WM carried those. It was a little weird that they made it out of glass. Real glass. But for $10 I figured I'd just have to be careful with it.

Within a few hours I had made a female mold with good enough quality for me to make a couple of halfs and the next night I pulled two nacelle halfs from my mold an had them spliced together.

For some reason my camera isn't spaking to my PC right now so I don't have pics for you but I'll get that sorted out. It's gonna be slick. It's the final touch my Falcon needs to look really "finished".
Sign up now
to remove ads between posts
Old Feb 24, 2011, 12:48 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
cant wait to see the pics .....and to think i spent months making a plug
Old Feb 24, 2011, 01:58 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
Yeah, you should have checked Wally World Rodger....but mine didn`t come with a NACCA duct.

My nacelle is quite a bit smaller than yours. It`s 12" long and has a max outer dia of about 5.5".

I cleaned off my desktop the other day and I must have delieted something that makes my camera work. Gotta figure that out.
Old Feb 24, 2011, 02:03 PM
yakhakker is offline
Find More Posts by yakhakker
still trying to get it right
yakhakker's Avatar
Show us some photos please knife
Old Feb 24, 2011, 02:07 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
I will as soon as I get my camera working. I seems to have an issue right now.
Old Feb 24, 2011, 02:12 PM
AIR SALLY is offline
Find More Posts by AIR SALLY
deltas are cool
AIR SALLY's Avatar
mines like 16" long and 6.5 max dia.....ah i mean that my nacelle is 16" x6.5"
Old Feb 24, 2011, 02:31 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
LOLOLOLOL Good belly laugh. Thanks Rodg
Old Feb 24, 2011, 02:53 PM
Getmore Rc is online now
Find More Posts by Getmore Rc
Matrix 90 & 100mm sport jet
Getmore Rc's Avatar
Has there been one of the turbax rotor's cut for a 100mm fan yet with numbers. I have a Haoye 4" shroud and want to cut a rotor down but if it don't work I don't want to waste a rotor. Thanks

Bill
Old Feb 24, 2011, 03:44 PM
ca_fingers is offline
Find More Posts by ca_fingers
Been there , Crashed that
Quote:
Originally Posted by AIR SALLY View Post
mines like 16" long and 6.5 max dia.....ah i mean that my nacelle is 16" x6.5"
^^^^^ EPIC!!!!!!
lee, havy you run the 880 kv in a 5" fan or is it too much load? started a mirage 2000 c today from plan and it calls for a ramtec fan . i want to make the ducts soon, im thinking of making the plugs out of balsa covered with monokote . am i nuts or will it work?
Old Feb 24, 2011, 03:56 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
Quote:
Originally Posted by Getmore Rc View Post
Has there been one of the turbax rotor's cut for a 100mm fan yet with numbers. I have a Haoye 4" shroud and want to cut a rotor down but if it don't work I don't want to waste a rotor. Thanks

Bill
I did Bill and it worked well. I used the 1100 kv. Arngeir has a 4" with the 880. I posted some numbers back in the #600's of the posts. The 880 numbers are posted after that. Scroll back and you'll find them.
Last edited by Knife Liddle; Feb 24, 2011 at 06:52 PM.
Old Feb 24, 2011, 04:02 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
Quote:
Originally Posted by ca_fingers View Post
^^^^^ EPIC!!!!!!
lee, havy you run the 880 kv in a 5" fan or is it too much load? started a mirage 2000 c today from plan and it calls for a ramtec fan . i want to make the ducts soon, im thinking of making the plugs out of balsa covered with monokote . am i nuts or will it work?
If the plans were for an IC Ramtech I think the 4.5" fan would be plenty. I'm sure that a stock Haoye rotor would be way too much for the 880kv. And the Turbax rotor is too small for the 5" shroud. Go 4.5".

Balsa/monokote plugs will work fine for making intakes.
Old Feb 24, 2011, 04:20 PM
ca_fingers is offline
Find More Posts by ca_fingers
Been there , Crashed that
lee, do you think i can keep the intakes at ramtec/dynamax size and choke them down to 4.5" incase i get rich and invest in an xps dynamax?
Old Feb 24, 2011, 05:38 PM
Arngeir Blakseth is online now
Find More Posts by Arngeir Blakseth
Senior Member
Arngeir Blakseth's Avatar
Actually my test number with the 4" fan has so far been with a 800 kv motor, but it has a 880 Turnigy installed now, I will get some test numbers posted next week. On 12S I expect something like 75-80A and 11-12lbs of thrust based on my results with the 800kv Century motor I have been using so far.
Old Feb 24, 2011, 05:39 PM
Arngeir Blakseth is online now
Find More Posts by Arngeir Blakseth
Senior Member
Arngeir Blakseth's Avatar
Quote:
Originally Posted by ca_fingers View Post
lee, do you think i can keep the intakes at ramtec/dynamax size and choke them down to 4.5" incase i get rich and invest in an xps dynamax?
Best way is to keep the inlet area constant all the way to the fan.
Old Feb 24, 2011, 08:06 PM
Knife Liddle is online now
Find More Posts by Knife Liddle
Lee Liddle
Knife Liddle's Avatar
OK got my PC and camera speaking again, so here are a few pics. If anyone wants to see more pics, let me know. Now that I have my camera working again, I`ll take more pics as I mount the fan and make a way to mount the unit to the Falcon.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale ducted fan/motor combo bucsbw Aircraft - Electric - Power Systems (FS/W) 1 Aug 06, 2011 01:09 PM
Discussion LX Fan/motor 6S, LX motor mini rotor jet-ster Foamy EDFs 6 May 15, 2011 10:59 PM
Sold TamJets TJ90MM Fan With Midi Rotor & Motor Setup $400 Shipped FlyBoyTha1 Aircraft - Electric - Jets (FS/W) 3 Sep 12, 2010 01:50 PM
Discussion Lost over 90mm Midi Fan and Motor combo??? bri6672 Electric Ducted Fan Jet Talk 18 Jan 21, 2010 08:51 PM
Discussion 1.4KW+ motor for 6S on 70mm fan? DominicM Electric Ducted Fan Jet Talk 71 Aug 23, 2009 09:44 PM