Thread Tools
Jan 08, 2011, 11:45 PM
Registered User
Thanks Lee,


Ric
Sign up now
to remove ads between posts
Jan 09, 2011, 01:45 AM
Registered User
29 for motor
21 for fan
39 for turbax rotor
79 for TURNIGY Sentilon100A

Going 160 mph in a 120 EDF?

PRICELESS
Jan 10, 2011, 08:09 AM
Registered User
RW-Jets's Avatar
Woow good Lee...

Thatīs impressive and how much Amps are you now get on this Turnigy 25C 12S Lipos? Sorry when I didnīt read it out here

Ah and did you measure the thrust till yet?

René
Jan 10, 2011, 10:02 AM
fly like an EAGLE ;)
corsair nut's Avatar
Lee and others interested....i now have the final version of the motor adapter in my hands.....and its sweeeet!!!!! ill post pics tonight when i mount and install it....but needless to say.....its very very nice! i think you guys will like it....also, i saw the turbax universal motor adapter, and its just about done, but fits like a freakin glove....i should have that in a couple days to post pics ect.....
Jan 10, 2011, 10:03 AM
Renegade Fun Forever!!
rvincent's Avatar
Nice! Thanks Brent
Jan 10, 2011, 10:51 AM
Registered User

Hey CN


Can you put me on the list for 2?
Jan 10, 2011, 12:05 PM
fly like an EAGLE ;)
corsair nut's Avatar
yes, any body who wants a motor extension for the haoye 4.5" fan, pm me with how many you want, and what size output shaft your motor has, and what size output shaft you want for the rotor side. aka....5 or 6mm. he also has a 6mm adapter for the turbax.....ive got a couple, and they fit like freakin gloves.
Jan 10, 2011, 05:46 PM
deltas are cool
AIR SALLY's Avatar
Dont forget me eh!.
Jan 10, 2011, 09:06 PM
Registered User
Price?????



Ric
Jan 11, 2011, 12:16 AM
fly like an EAGLE ;)
corsair nut's Avatar
lee, don doplered your passes and got 160 on all 3. rpm just under 33k. sweeeet.

pics in a few...

ric, i need to check with my buddy, but i think the universal motor extension is 65$ and the turbax 6mm adapter is 15. but i need to double check.
Jan 11, 2011, 01:23 AM
fly like an EAGLE ;)
corsair nut's Avatar
ok, heres the pics im using little dabs of jb weld to hold the extension to the motor shaft. then, bolt the motor to the adapter, (you provide the fastners) bolt the assembly to the fan(using 6/32 screws) then, use rotor adapter of choice, im using my friends 6mm alum adapter. it comes with 2 really deep set screws, so you can really get a good bite. then, attach rotor the turbax rotor fits tightly with this adapter. you provide the washer. i used one from a e turbax, but most prop adapter washers will work. runs super true tomorrow after the jb weld cures over night, ill give her a run up to test eflux. my watt meter took a dump....so i wont be able to get any numbers till i get a new one, but i can get some eflux numbers. we already know what the motor does on 12s through lees testing, using the motor extension shouldnt change that.

also....a pic of a new possible idea....toss one of the 1100 motors on a midi fan eh? hmm......

i recomend using a flat spot on the shaft for the set screw on the intermediate shaft. the turnigy motor has a real nice one. if your motor doesnt have one, id add a small one. also, if you dont use jb weld on the intermediate shaft, i recomend using red locktite.
Last edited by corsair nut; Jan 11, 2011 at 01:34 AM.
Jan 11, 2011, 03:25 AM
deltas are cool
AIR SALLY's Avatar
does the intermediate shaft run inside the stand off? if so then there is no bering on the aft end of the stand off?
Jan 11, 2011, 08:56 AM
Registered User

Bearing?


Yeh...don't we need a bearing on the end that the motor attaches too?
Jan 11, 2011, 09:25 AM
Renegade Fun Forever!!
rvincent's Avatar
I can see the bearing guys Yes it has a 3rd bearing.
Jan 11, 2011, 09:34 AM
fly like an EAGLE ;)
corsair nut's Avatar
theres a bearing on the end. theres no need for a 4th bearing right in front of the front bearing on the motor.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale ducted fan/motor combo bucsbw Aircraft - Electric - Power Systems (FS/W) 1 Aug 06, 2011 01:09 PM
Discussion LX Fan/motor 6S, LX motor mini rotor jet-ster Foamy EDFs 6 May 15, 2011 10:59 PM
Sold TamJets TJ90MM Fan With Midi Rotor & Motor Setup $400 Shipped FlyBoyTha1 Aircraft - Electric - Jets (FS/W) 3 Sep 12, 2010 01:50 PM
Discussion Lost over 90mm Midi Fan and Motor combo??? bri6672 Electric Ducted Fan Jet Talk 18 Jan 21, 2010 08:51 PM
Discussion 1.4KW+ motor for 6S on 70mm fan? DominicM Electric Ducted Fan Jet Talk 71 Aug 23, 2009 09:44 PM