Thread Tools
Old Oct 15, 2010, 10:46 AM
brandonwilcox is offline
Find More Posts by brandonwilcox
brandonwilcox's Avatar
New Product

MaxAmps.com Race Edition 150C Hard Case LiPo Battery Packs



When second place isn’t an option turn to MaxAmps.com for the most powerful LiPo battery pack on the market. Being a true 150C pack, the Race Edition cells hold the highest voltage under load among any cells that we’ve tested. The pack will be ROAR approved and features a hard case for durability and 6500mah of capacity for super long run times. This pack is a must-have if you’re a serious racer or if you’re just looking for the best pack money can buy.

Specs:
• 3-year 300-cycle guarantee
• 45+ mph in most brushless setups (7.4 volts)
• 39 minutes average run time (6500mah capacity)
• True 150C rating
• 5C fast charge capable
• 100% waterproof
• Hard outer case
• Built today with factory fresh cells
• Built with genuine 12awg Deans Ultra wire
• We add the connectors and balancing taps for you
• 139mm x 47mm x 25mm, 356g

About MaxAmps.com
MaxAmps.com is the industry leader for high-quality LiPo and NiMh batteries for air, water and surface RC products. Their packs are made to order same day and are assembled in the USA. All battery packs come 100% water-sealed for all-weather protection and include a 3-year 300-cycle warranty at no additional charge. For more information on MaxAmps.com, please visit http://www.maxamps.com or call 888-654-4450.
Site Sponsor
Sign up now
to remove ads between posts
Old Oct 15, 2010, 11:32 AM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Quote:
True 150C rating
Eqauls a 100% state of discharge in 24 seconds and also implies 975 amps. flowing thru
Quote:
genuine 12awg Deans Ultra wire
Have you posted a graph of a 150C (975amps) discharge anywhere?

Charles
Old Oct 15, 2010, 11:40 AM
Helno is offline
Find More Posts by Helno
Registered User
Good luck testing that 150C rating. The 12 awg leads will have a higher resistance than would be required to achieve that kind of load.
Old Oct 15, 2010, 12:26 PM
Cody f86saber is offline
Find More Posts by Cody f86saber
Edge of the World
Cody f86saber's Avatar
• 45+ mph in most brushless setups (7.4 volts)
• 39 minutes average run time (6500mah capacity)
What power system setup gave these results? Results like these should have context so we can understand what is being demonstrated. Will there be smaller capacity high discharge versions available? Some high discharge packs in the 900mAh to 2200mAh range would be great.
Assuming it drops to about 7.4V from it's 8.3-8.4V full charged state while under a 975A load, the load resistance including wires would have to be under 0.00759 Ohms. I don't think 12g wires are normally rated for >7000W.
Last edited by Cody f86saber; Oct 15, 2010 at 01:42 PM.
Old Oct 15, 2010, 12:50 PM
Wrend is offline
Find More Posts by Wrend
どうもありがとうミスターロボット
Wrend's Avatar
Let's just call it 1.21 gigawatts while we're at it.



Quote:
Originally Posted by everydayflyer View Post
Have you posted a graph of a 150C (975amps) discharge anywhere?
I'd sure like to see a 24 second 975 amp discharge voltage graph...
Last edited by Wrend; Oct 15, 2010 at 01:44 PM.
Old Oct 15, 2010, 02:17 PM
brandonwilcox is offline
Find More Posts by brandonwilcox
brandonwilcox's Avatar
We will have some graphs and videos shortly to demonstrate the raw power of these packs. I think you will be quite impressed. Our testing was very thorough.

Brandon
Site Sponsor
Old Oct 15, 2010, 06:48 PM
Quixksilver is offline
Find More Posts by Quixksilver
Distributed Manufacturing
Quixksilver's Avatar
We don't trust you, we trust 3rd party testers like Charles.

-Q
Old Oct 15, 2010, 06:52 PM
jfetter is online now
Find More Posts by jfetter
HAL... Open the damn doors!
jfetter's Avatar
Quote:
Originally Posted by brandonwilcox View Post
We will have some graphs and videos shortly to demonstrate the raw power of these packs. I think you will be quite impressed. Our testing was very thorough.

Brandon
Are you saying you tested a 150C (975A) discharge?

Jack
Old Oct 15, 2010, 06:53 PM
jfetter is online now
Find More Posts by jfetter
HAL... Open the damn doors!
jfetter's Avatar
Quote:
Originally Posted by Quixksilver View Post
We don't trust you, we trust 3rd party testers like Charles.

-Q
Let's not be so harsh and just ask if they've used third party testers and would they consider it, I doubt the guy is a crook...

Jack
Old Oct 15, 2010, 06:58 PM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Last and in fact only cells I have tested from MaxAmps were their LiFePO4 2250s and I admit that they were very confusing to me. I could never figure out why they behaved as they did during charging, oh well.

https://www.rcgroups.com/forums/show....php?t=1313354

Charles
Old Oct 15, 2010, 08:46 PM
raypadro is offline
Find More Posts by raypadro
Registered User
Old Oct 15, 2010, 08:53 PM
Xpress.. is offline
Find More Posts by Xpress..
Team Hitec, Customer Support
Xpress..'s Avatar
Who needs 150C anyways????????
Old Oct 15, 2010, 08:57 PM
everydayflyer is offline
Find More Posts by everydayflyer
Southern Pride
everydayflyer's Avatar
Ever see a serious RC Drag Race?

Scale 1/4 mile wheel spinning ,smoking must use a Gyro to keep it straight excitement.
Old Oct 16, 2010, 08:26 AM
rebell is offline
Find More Posts by rebell
JustFlying
rebell's Avatar
I don't care about the 975 amps it might supply, but would like to see how the volts is holding up at say 100A or 150A over the full discharge to 80% of the cell capacity. That is what the value of high C ratings is to me. Five of the 7.4V pack would make a nice 10s pack for planes. If one cell is going bad, just replace 1 pack.
Old Oct 16, 2010, 10:37 AM
Helno is offline
Find More Posts by Helno
Registered User
Quote:
Originally Posted by rebell View Post
I don't care about the 975 amps it might supply, but would like to see how the volts is holding up at say 100A or 150A over the full discharge to 80% of the cell capacity.
100A is only 15C for a pack with this many mAh 150A is not even 25C


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Hard Case Lipo vs Heat Shrink Wrapped Lipo syncronized Racing Boats - Electric 8 Sep 25, 2010 07:37 PM
Sold (2) Turnigy 5200 mAh 2S 30C Hard-Case Car Lipo Packs NIB mattandleah Cars - Trucks and Parts (FS/W) 16 Jun 21, 2010 03:45 PM
For Sale R/C car racing li-po battery packs with hard case levinxu Cars - Trucks and Parts (FS/W) 8 Nov 24, 2008 12:03 AM