Futaba 9c, Dragon Link, Eagle Tree OSD Pro. - RC Groups
Thread Tools
Oct 11, 2010, 01:04 PM
Blu-Core is my friend
Gundy's Avatar

Futaba 9c, Dragon Link, Eagle Tree OSD Pro.

Futaba 9c, Dragon Link, Eagle Tree OSD Pro.

I know there are guys that are running this set up.
I just finished my new install in my skywalker.

Everything works great… I would like to use the simple “flip the switch” to test the RTH.
How do I do this?

I have looked at the posts about using the – trim on the throttle, but I am not sure how to get it set.

Sign up now
to remove ads between posts
Oct 12, 2010, 02:27 AM
Registered Loon
Blackrat's Avatar
you need to go thru the OSD manual ... its not just flip the switch, you gotta set it all up first, you can see the settings in the OSD menu
Oct 12, 2010, 10:21 AM
Blu-Core is my friend
Gundy's Avatar

Great answer

Originally Posted by billpa
Hi Gundy,
You just need to program the throttle failsafe position in the DL to correspond with a throttle position that you can only reach when you trim down beyond the normal trim point. Then, just run the RTH wizard, and select "PCM" and "1 failsafe" in the Safety Mode menu.
for those who e-mailed me about this...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Eagle Tree OSD Pro, No Aileron Output i-dru Eagle Tree Systems 6 Nov 01, 2010 05:12 PM
Discussion Where can I find RTH Manual Eagle Tree OSD pro? rapghsi FPV Talk 3 Oct 04, 2010 03:11 PM
Discussion Eagle Tree OSD pro package deal dbramley FPV Talk 1 Oct 04, 2010 12:37 AM
Sold Eagle Tree OSD and E-Loggers For Sale avropilot Aircraft - General - Miscellaneous (FS/W) 7 Sep 13, 2010 10:29 AM
Discussion Dragon link RSSI + Eagletree OSD PRO ecampos FPV Talk 2 Sep 09, 2010 01:51 AM