Thread Tools
This thread is privately moderated by Azarr, who may elect to delete unwanted replies.
Old Oct 09, 2010, 06:22 AM
Azarr is offline
Find More Posts by Azarr
RIP Azarr - "Old age is not for sissies"
Azarr's Avatar
Discussion

Leadfeather's Yak 55


I very seldom build more than one of the same plane, I think this is the 7th Yak I've built now. The Yak flys great at around 6.5oz, but this was my attempt to get down under 4oz. I almost made it at 118.7g (4.15oz) A little less glue or paint and I would have been under 4oz.

The wing is 9mm EPP, the fuselage and rudder 6mm EPP and the ailerons and elevator are 3mm depron. Hacker A10-15S, Turnigy Plush 6A esc, Futaba 3114 servo on ailerons and Dymond D47 on elevator/rudder.

Great flying plane, does everything the others do only at slower speeds.

Azarr
Sign up now
to remove ads between posts
Old Mar 02, 2011, 09:18 AM
PinkYakRC is offline
Find More Posts by PinkYakRC
Yeeah buddy!
PinkYakRC's Avatar
That Yak looks very well built. It must fly really well at 4 oz!!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Leadfeather's EPP Yak 55 motorhead Foamies (Kits) 68 Jan 04, 2015 11:09 PM
Discussion 18.5" Yak 55 Build (leadfeather's EPPYAK-55plans) K0na_stinky Foamies (Scratchbuilt) 1 Apr 05, 2009 05:05 PM