Shop our Airplanes Products Drone Products Sales
Feb 08, 2013, 11:23 AM
Registered User
disho's Avatar
Quote:
Originally Posted by Frank2351 View Post
Cheers Disho

I don't know how, but I left it as I was getting pxxxxd off with it. An hour later I plugged it in and it worked, but the orange reciever keeps flashing. If I rebind it the orange light goes solid, but when the battrie is disconnected and plugged back in it starts flashing. The only way I can keep it solid is if I turn my DX6i off then then plug the bat in and then turn the transmitter back on.

Disho
Did you find that with a 6 cell 3300 when held in an upright position and full throttle would it hover or did it slowly drop.
Mine slowly drops, but I recon if I gently threw it level it would be off like a goodun. Tommorow is forecasted 7mph winds, so hopefully a maiden.
Goodluck with the maiden try and get some video to compair with mine, ive got a couple of maidens this weekend weather permitting
Sign up now
to remove ads between posts
Feb 08, 2013, 01:13 PM
Suspended Account
Quote:
Originally Posted by disho View Post
Goodluck with the maiden try and get some video to compair with mine, ive got a couple of maidens this weekend weather permitting
ME 626 is one of my favorite planewhat brand is that one ?
It looks great
Feb 08, 2013, 01:26 PM
Registered User
They look great.
What set ups have you got in them and were did you get the airframes.
Feb 08, 2013, 01:42 PM
Suspended Account
Quote:
Originally Posted by Frank2351 View Post
They look great.
What set ups have you got in them and were did you get the airframes.
After a little research it looks like the Dynam ME 262 but I'm not 100%
Feb 08, 2013, 05:51 PM
Gravity sucks.
Quote:
Originally Posted by Frank2351 View Post
Cheers Disho

I don't know how, but I left it as I was getting pxxxxd off with it. An hour later I plugged it in and it worked, but the orange reciever keeps flashing. If I rebind it the orange light goes solid, but when the battrie is disconnected and plugged back in it starts flashing. The only way I can keep it solid is if I turn my DX6i off then then plug the bat in and then turn the transmitter back on.

Disho
Did you find that with a 6 cell 3300 when held in an upright position and full throttle would it hover or did it slowly drop.
Mine slowly drops, but I recon if I gently threw it level it would be off like a goodun. Tommorow is forecasted 7mph winds, so hopefully a maiden.
this is normal behaviour for the orange RX's - the flashing light tells you it's lost power but has been reconnected.

the spark when you plug the ESC in is normal - that's the capacitors on the ESC charging up on initial plug in.

the high end ESC's will beep sometimes with the motor unless the RX is bound.

or if the throttle range hasn't been calibrated (usually the first thing you do after the first time you plug it in)
Feb 08, 2013, 05:57 PM
Registered User
That one is the Freewing Me-262. Almost double the cost of the Dynam Me-262, but it comes with a lot more stuff stock too. Both fly pretty much the same though.
The main difference is that if you want it to look as good as the Freewing one, the Dynam needs work... some airbrushing etc. But if the Dynam 'ok but nothing special' finish is OK for you then it is almost ready to go as it comes - both need some mods to improve shortfalls. (as per all foamies)

Dynam:
...
Last edited by PeterVRC; Feb 08, 2013 at 06:03 PM.
Feb 08, 2013, 06:19 PM
Registered User
disho's Avatar
Quote:
Originally Posted by Frank2351 View Post
They look great.
What set ups have you got in them and were did you get the airframes.
Thanks, the blue and white one is a 70m l39 its a fly fly kit, i have a few of there kits, it has the same set up as my t45 the twin is the new freewing me 262, also nearly got my f5e tigershark done that too has the same setup as my t45
Feb 08, 2013, 08:37 PM
Registered User
Where do you get them from disho
Feb 09, 2013, 04:32 AM
Registered User
disho's Avatar
Quote:
Originally Posted by Frank2351 View Post
Where do you get them from disho
Hi,got the f5e from ebay, and i use rc castle got the me262 and l39 from them check out the web site
Feb 09, 2013, 08:08 AM
Jimmy Wayne
jmack007's Avatar
I have a HK T-45 ordered and from what I have been reading here It looks like I need to buy an upgraded ESC. Can you order one with a Deans connector or is that something I need to do?
Thanks.
Feb 09, 2013, 08:59 AM
Registered User

Does someon have a used fan for the stock T-45 ?


Hello everyone,
I have a T-45, stock setup, but the fan suddenly exploded (while i was running it at home).

I am looking for some spare fans (not the whole group, just the rotating part).
Does anyone of you have some to sell me ?
I already bought a new whole motor + fan, as it was impossible for me to find the fan only.
Here you can see the original fan :
---------
http://www.ebay.it/itm/380364281432?...84.m1439.l2649
---------

But i am still interested in having many spare fans ad hand, also for experimenting.
Also different from the original, but that can be used. They should be 64 mm in diameter.

Thanks in advance.

Best regards.
Feb 09, 2013, 10:24 AM
Registered User
Well just got back from my maiden. CS 10 blade, BL32, nano tech 3300 35-70 c 6 cell and 80 amp ESC.
Oh yes I nearly wet myself with excitement. What a great flying plane and the sound is so turbine like. Everyone at the field could not believe it and it easy past our noise restrictions of 80 db as it came in at 74.
Cheers Disho, what a spot on power set up.
Feb 09, 2013, 10:30 AM
Registered User
http://youtu.be/1r6sLHfeYAc?sc
Feb 09, 2013, 10:58 AM
Registered User
Feb 9, 2013 (1 min 41 sec)
Feb 09, 2013, 11:04 AM
Registered User
It flys very stable slow too


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product F4D Skyray 64mm EDF by FMS Model Joe 1320 Foamy EDFs 1032 Nov 30, 2015 09:00 PM
Article G&C Hobby F-16 "Fighting Falcon" 64mm EDF from NitroPlanes Review Spackles94 Foamy EDFs 69 May 19, 2012 02:46 AM
Discussion Hobby King A4 Blue Angels EDF Jet airbagit13 Electric Ducted Fan Jet Talk 8 Nov 04, 2010 11:37 PM
For Sale Replacement 64mm EDF fan units for EDO and Hobby Lobby jets (REDUCED) The Don Aircraft - Electric - Jets (FS/W) 10 Dec 07, 2008 10:24 PM
Discussion broken fan on 64mm sapac t45 edf newguy2005 Foamy EDFs 0 Jul 19, 2008 04:44 PM