New Products Flash Sale
Thread Tools
Old Oct 02, 2010, 05:56 AM
kakariki is offline
Find More Posts by kakariki
Newbee
Discussion

Old Enya Engines


Hi All
Is there a list of all (or most) of the older Enya's with the specs, eg. dimensions, ringed, non ringed etc.
Thanks Barry
Sign up now
to remove ads between posts
Old Oct 02, 2010, 01:44 PM
iluv2fli is offline
Find More Posts by iluv2fli
Suspended Account
Probably not. Enya made dozens of engines in the laster 40 years
Old Oct 02, 2010, 03:24 PM
coriolan is offline
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
Enya goes back a lot more than 40 years:
"The very first model engine produced by Enya was the 63 which Saburo Enya used at a flying meet in 1949. In October 1949, two types, No.1 and 2 were marketed under the name Enya "Typhoon" 63. Type No.1 was a plain bearing and shaft rotary valve engine, while Type No.2 was a twin ball-race and disc rotary valve model. Only Type 1 reached production levels. The 63 was replaced by 60 in 1956.

In February 1950, the quantity production of model engines began with the very first Enya 19 - a sandcast engine with a 3-bolt front housing, produced in small numbers until the introduction of the Enya 19 Model 4002, which featured an oval exhaust and head fins higher at the front. (the corresponding Red Head sandcast 29 appeared in April 1952-with 4 bolt housing). Slotted screws used on these, "Made in Japan" cast into L.H. mounting lug adge - 4 bolt front-housing and head.. This die-cast 4002 started production circa 1953, followed by the Enya 19 Model 4003 in about 1955, which featured a long, "slopey" intake and thin-walled rectangular exhaust, "flat" on top head fins."
http://www.supercoolprops.com/articles/enya.php
Old Oct 02, 2010, 04:19 PM
Red Zephyr is offline
Find More Posts by Red Zephyr
RoyalAustralianEasyMoneyE arner
Mate, see if you can track down a bloke on here with the "nic" of Downunder, I'm pretty sure that he's got it actually mapped out and I'm also pretty sure that he's posted it here.

BTW I'm a huge Enya fan myself

Cheers

RZ
Old Oct 02, 2010, 06:06 PM
iluv2fli is offline
Find More Posts by iluv2fli
Suspended Account
Quote:
Originally Posted by coriolan View Post
Enya goes back a lot more than 40 years:
"The very first model engine produced by Enya was the 63 which Saburo Enya used at a flying meet in 1949. In October 1949, two types, No.1 and 2 were marketed under the name Enya "Typhoon" 63. Type No.1 was a plain bearing and shaft rotary valve engine, while Type No.2 was a twin ball-race and disc rotary valve model. Only Type 1 reached production levels. The 63 was replaced by 60 in 1956.

In February 1950, the quantity production of model engines began with the very first Enya 19 - a sandcast engine with a 3-bolt front housing, produced in small numbers until the introduction of the Enya 19 Model 4002, which featured an oval exhaust and head fins higher at the front. (the corresponding Red Head sandcast 29 appeared in April 1952-with 4 bolt housing). Slotted screws used on these, "Made in Japan" cast into L.H. mounting lug adge - 4 bolt front-housing and head.. This die-cast 4002 started production circa 1953, followed by the Enya 19 Model 4003 in about 1955, which featured a long, "slopey" intake and thin-walled rectangular exhaust, "flat" on top head fins."
http://www.supercoolprops.com/articles/enya.php
All I said was Enya made dozens of engines in the last 40 years. That's a fact. The fact that Enya is more than 40 years old does not void my statement.

Same for OS, Fox, K&B and many other companies. Doesn't matter what engines they made or when just the fact that they made dozens in the last forty years.
Old Oct 02, 2010, 10:44 PM
downunder is offline
Find More Posts by downunder
Registered User
downunder's Avatar
The OP got a couple of replies over on RCU but there's no harm in repeating them here for others who may not use RCU and are interested. These lists are by no means complete though but cover most engines we might run across.
Old Oct 02, 2010, 11:58 PM
Artisan is offline
Find More Posts by Artisan
NM2K
Quote:
Originally Posted by downunder View Post
The OP got a couple of replies over on RCU but there's no harm in repeating them here for others who may not use RCU and are interested. These lists are by no means complete though but cover most engines we might run across.

Thanks, Downunder. Much appreciated.


Ed Cregger
Old Oct 03, 2010, 04:05 AM
Twin-Stack is offline
Find More Posts by Twin-Stack
Closed Account
As I'm the guy who wrote that stuff on the Supercool Racing Propellers website, I would be happy to email to anyone my latest (and LAST! ) Enya epic entitled the Enya Model Engine Compendium. Contact me direct at - bobshirl@bigpond.com (there is no charge). I see no point in hiding this information (which has probably consumed at least 300 hours of my time) away from the few guys who are interested, and lets face it - in 25 years time, nobody will even know of Enya engines. BOB ALLAN.
Old Oct 03, 2010, 09:46 AM
downunder is offline
Find More Posts by downunder
Registered User
downunder's Avatar
Seeing I have a copy of Bob's epic I can guarantee it's worth your while having it as a reference. A lot of effort has gone into this by Bob and a couple of his cronies digging up facts from all over the place.
Old Oct 03, 2010, 10:18 AM
Grandstand is offline
Find More Posts by Grandstand
Registered User

Enya Engines


Bob sure helped me in collecting Enya engines...Thanks to him and his resurce it played a big part on what is good to collect ...One I am trying to find is a SLH 15-A ..But no luck yet ...It was a clone by Thunder Tiger ...Anyone got one ..???? rbonnell@tampabay.rr.com
Old Oct 03, 2010, 04:21 PM
G WILLIE is offline
Find More Posts by G WILLIE
Bill Mohrbacher, MECA Fox Guy
G WILLIE's Avatar
I'm glad Bob is sharing his list, it is truly marvelous work. Work like this will insure that people will know there were Enyas in 25 years! If Bob had not did ths work now, it would be darn near impossible to do in 25 years.

Thats something we collectors do; record history while it can still be done.

Bill Mohrbacher
MECA President
Old Oct 04, 2010, 08:50 AM
buzzard bait is offline
Find More Posts by buzzard bait
Registered User
Just got Bob's compendium...amazing work. Thanks for mentioning it, guys, and thanks especially to Bob for doing it. It's easy to take these little pieces of machinery for granted. The development history gives an idea of what really went into it.

Jim


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Three New Old Engines kpriddle 1/2A Planes 14 Aug 19, 2010 09:37 PM
Discussion Ken Enya of Enya Engines sarg96 Vendor Talk 2 Jul 24, 2010 12:20 PM
Sold 3 nitro engines! OS/Enya and COX with free shipping! flyinjrc74 Aircraft - Fuel - Engines and Accessories (FS/W) 2 Mar 08, 2010 10:49 PM
Wanted 2 engines wanted, Golden Bee and Enya .11CX Invertedflyby Aircraft - Fuel - Engines and Accessories (FS/W) 0 Dec 19, 2009 12:50 PM
Sold Engines Enya .60 Like New, Enya .60, K&B .45 nitro16 Aircraft - Fuel - Engines and Accessories (FS/W) 3 Jan 08, 2007 11:19 AM