Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 01, 2010, 07:51 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Yippee!

Parkzone Ultra Micro FPV - 5.8ghz 200mw FPVhobby TX - 40g without lipo's :D


Aww yeah!
Always wanted to FPV these little suckers but the only tiny TX's were the 2.4ghz units I had were from intelligent flight... no good for the 2.4ghz spek bricks in these planes

So forked out some cash for the FPVhobby.com 100mw 5.8ghz TX
&
Also grabed the 1 gram nano camera.

Spent some time trying to get the TX and Cam filtered so I could stick with the 1 Lipo but I gave up after a short while and went the 2 lipo route...

Anyway heres the test vid and the maiden flight, the recorder stuffed up (worst timing as usual) so I couldnt grab the onboard video, but I salvaged some stills which were still viewable.

Will try again tomorrow and see if I can go "under the bar"

Enjoy

TX/RX test @ home
Ultra Micro Trojan FPV ground testing (3 min 39 sec)


Maiden flight & full FPV flight @ the park
Parkzone Ultra Micro T-28 Trojan FPV Maiden (2 min 54 sec)


Some fun at indoor
Ultra Micro FPV T-28 Trojan @ Indoor with some bad crashes!! (4 min 23 sec)


Rudder chopped off mid flight
Parkzone Ultra Micro T-28 Trojan FPV - Rudder severed mid-flight :( (4 min 1 sec)


Found a good spot for the camera, just need more practice now!
ParkZone Micro Trojan FPV - crashes, formation, birds & more :P (5 min 7 sec)


Last of the Trojan vids for now, system getting disassembled and put into something else
ParkZone Micro Trojan FPV - 23/10/2010 (4 min 28 sec)
Last edited by chancesAU; Mar 07, 2011 at 07:22 PM.
Sign up now
to remove ads between posts
Old Oct 01, 2010, 08:32 AM
marco899 is offline
Find More Posts by marco899
Registered User
Nice review and great fpv flying with such a small screen.
Old Oct 01, 2010, 08:48 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Thanks Marco, im just building up the 2nd RX tonight and will have the diversity going for tomorrow - also the fatsharks...
Old Oct 01, 2010, 11:38 AM
scrape is offline
Find More Posts by scrape
WOW!!! That's cool.

Old Oct 01, 2010, 11:26 PM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Mannn... raining heaps today
Hopefully it will survive indoor tonight...
Old Oct 02, 2010, 01:26 AM
cncoz is offline
Find More Posts by cncoz
Time's fun when ya havin flies
cncoz's Avatar
Hi Max,
This is the stuff I NEED.
My 2.4Ghz rig suffers too much with interference from my mates with their 2.4Ghz RC gear.
Was thinking of splurging on the new 5.8Ghz fatsharks coz I want better goggles anyway. What do you recon ?
That would make a very convenient , close range FPV outfit for hacking around the park.
BTW what are you using for RC with that trojan ? I guess you've got a spektrum module in the back of your 9C but didn't see the antenna.
Cheers !
Old Oct 02, 2010, 02:34 AM
Kev.au is offline
Find More Posts by Kev.au
Post # 20 million
Kev.au's Avatar
Frigging awesome!.

You're the king of micro hahaha.


That nano cam looks pretty good ay.


Cheers, Kev.
Old Oct 02, 2010, 03:45 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Hey guys
Bloody raining all day today - well not true but not good for the lil trojans 1st proper FPV...
Indoor happening in a couple hours but I think the video will be crap - we'll see!

Cncoz - Fatshark uses these channels -
CH1: 5740Mhz, CH2: 5760Mhz,
CH3: 5780Mhz, CH4: 5800Mhz
CH5: 5820Mhz, CH6: 5840Mhz
CH7: 5860Mhz

Chinese stuff uses -
Ch1:5705mhz , Ch2:5685mhz
Ch3:5665mhz , Ch4:5645mhz
Ch5:5885mhz , Ch6:5905mhz
Ch7:5925mhz , Ch8:5945mhz

I have a awesome yellowjacket diversity 5.8ghz RX but the channels were way off
I got the RX modules from FPVhobby, 2 of them... hang on ill take some pictures.
Got heaps of Chinese takeaway box's (perfect! hehe) so I just build stuff into them.
Only got video - no audio, 2 RX's and then everything plugged into the oracle.

Kev.au - Camera rocks! but the FOV is little too narrow for my liking, works great tho, so tiny!
Old Oct 02, 2010, 04:28 AM
BlueAngel2000 is offline
Find More Posts by BlueAngel2000
Flying like an Angel.
BlueAngel2000's Avatar
This modules are Sky-RF modules.
SKY-RF Homepage translated to English

Check their page for more information.
Normally the modules need some capacitors to work correctly.

I have not found the 100mW on their homepage, maybe its a new one.

Which length does the TX antenna has?

cool project by the way.
Old Oct 02, 2010, 07:37 PM
cncoz is offline
Find More Posts by cncoz
Time's fun when ya havin flies
cncoz's Avatar
Quote:
Originally Posted by chancesAU View Post
Hey guys
Bloody raining all day today - well not true but not good for the lil trojans 1st proper FPV...
Indoor happening in a couple hours but I think the video will be crap - we'll see!

Cncoz - Fatshark uses these channels -
CH1: 5740Mhz, CH2: 5760Mhz,
CH3: 5780Mhz, CH4: 5800Mhz
CH5: 5820Mhz, CH6: 5840Mhz
CH7: 5860Mhz

Chinese stuff uses -
Ch1:5705mhz , Ch2:5685mhz
Ch3:5665mhz , Ch4:5645mhz
Ch5:5885mhz , Ch6:5905mhz
Ch7:5925mhz , Ch8:5945mhz

I have a awesome yellowjacket diversity 5.8ghz RX but the channels were way off
I got the RX modules from FPVhobby, 2 of them... hang on ill take some pictures.
Got heaps of Chinese takeaway box's (perfect! hehe) so I just build stuff into them.
Only got video - no audio, 2 RX's and then everything plugged into the oracle.

Kev.au - Camera rocks! but the FOV is little too narrow for my liking, works great tho, so tiny!
Max,
Yes, a bit of a @#$%^-off .....this rain. I've got some gear I want to test too.
Thanks for them frequencies, I would have checked it all before buying but you've just saved me a shipload of work.
That rig of yours is a work of art !
I'm still keen on the 5.8mhz fatsharks, just for the convenience of setup, getting a bit tired of carrying a big patch, RX, batteries, leads, goggles, more leads, friggin' jumper over the head, now where's that lead....damn, left it at home !!!
Anyhoo, I'll find out how heavy the fatshark 5.8Ghz TX's are, It's just for parkfliers so it doesn't need to be sub-gram.
We should get together for a fly or a beer or both if it EVER STOPS RAINING !
Cheers !
Old Oct 02, 2010, 08:39 PM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Im up for that!
Tell me about it, been up at the crack of dawn both sat and sun... waste of time... hehe

I was going to install one of the RX's into my 2.4ghz fatsharks... but lost interest..

Got some footage from indoor last night, cralis and firepower were there to egg me on, ill cut it up today sometime and post it in here
Old Oct 03, 2010, 04:41 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Heres the video from indoor last night... was sooo much fun

Ultra Micro FPV T-28 Trojan @ Indoor with some bad crashes!! (4 min 23 sec)
Old Oct 03, 2010, 05:17 AM
cncoz is offline
Find More Posts by cncoz
Time's fun when ya havin flies
cncoz's Avatar
Crazy stuff guys....
Well done !
Old Oct 03, 2010, 05:32 AM
PeteSchug is offline
Find More Posts by PeteSchug
Registered User
PeteSchug's Avatar
Quote:
Originally Posted by chancesAU View Post
Heres the video from indoor last night... was sooo much fun
Really nice. I loved the pic in pic display!

Pete
Old Oct 03, 2010, 05:38 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Thx
Those 5.8ghz transmitters seem to work well, once I get a chance ill take it outside and do a range test... hmm, I think it will lock out before the video drops tho!


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! What range for the 5.8ghz 2010 Fatshark + 100mW Tx? Getting 60-100m only! adbo FPV Talk 16 Oct 27, 2010 05:00 PM
Sold FPV gear.2.4 ghz 100mW tx, rx, GP 161 camera darmar Aircraft - General - Miscellaneous (FS/W) 3 Sep 30, 2010 11:34 PM
Discussion 5.8GHz Video Transmitter 100mW....250 mW ...or more sigma_fr FPV Talk 43 Aug 02, 2010 02:54 PM
Discussion Just wondering... 900Mhz stuff with same quality as new 2.4/5.8Ghz Tx/Rxs? AleG FPV Talk 0 Jul 28, 2010 05:26 PM
Discussion What tx freq for FPV video, 900MHz, 1.2GHz or 5.8GHz garris2 FPV Talk 3 Jul 07, 2008 04:03 AM