Thread Tools
Mar 28, 2011, 06:47 AM
Registered User
LK2TINKR's Avatar
Here you go, bamaguy... Good luck with your build. The wheels are 1 3/4" (45 mm) in diameter. The main struts are 2.5 mm diameter wire.

LK2TINKR
Sign up now
to remove ads between posts
Mar 28, 2011, 08:53 AM
Registered User
sanman55's Avatar
I hit mine with an rpm meter and did the same thing...snaped right off with no damage to prop...Now this is what I did , ...http://www.graysonhobby.com/catalog/...bly-p-247.html, now this shaft is like 2.97mm, measure yours..and its the right length..but I use a different motor can on mine, cause the orginal would bind on the new shaft, shift from side to side, but that might have been cause it hit so hard and messed up the shaft hole..the orginal can only has one set screw and thats not good..Hope this makes sense.. its hard to explain...but mine works fine..
sanford
Mar 28, 2011, 09:10 AM
Don't Move I've Dropped My Nut
bamaguy's Avatar
Many thanks! Exactly what I needed!

Sorry about your winter weather in NY....It's rainey and windy here in Northern Alabama. I be not fly'in either.
Mar 28, 2011, 07:35 PM
Takeoff=Option Landing=Must
robusp's Avatar
Quote:
Originally Posted by LICobra
LK2TINKR....sounds like a plan...looking foward fro some formation flying...

NW...Happy B Day....glad you to fly...even if it was just for a short time.

Well my troubles continue with the 310, as I just can seem to catch a break with this airplane.
This morning was cold again under 30* but winds were very low at 7am, she flew nice in the calmer winds and was amazed how slow she'll fly with the flaps lowered....but on the second flight I got bit again....I brought her around and it looked like all gear was lowered, then I brought her in.... just as the mains touched the pavement I saw the left wing dip well it turned out the left main gear did not lower. As the left prop touched the ground, the entire prop assembly broke off the shaft, with all blades intact.

I searched online and there seems to be no replacement prop shafts for the Dynam DYM-0010 motor.......any suggestions.

LICobra, Sanford,

I broke one of my shafts on a second outing. I was devastated. Then started going thru all motors and found this to be exactly same size: http://hobbyking.com/hobbyking/store...idProduct=7342
Maybe its even stronger, Its been on for couple of months (knock on wood)

Rob
Mar 28, 2011, 08:15 PM
Warbird Enthusiast
LICobra's Avatar
Quote:
Originally Posted by sanman55
I hit mine with an rpm meter and did the same thing...snaped right off with no damage to prop...Now this is what I did , ...http://www.graysonhobby.com/catalog/...bly-p-247.html
sanford
Quote:
Originally Posted by robusp
LICobra, Sanford,

I broke one of my shafts on a second outing. I was devastated. Then started going thru all motors and found this to be exactly same size: http://hobbyking.com/hobbyking/store...idProduct=7342
Maybe its even stronger, Its been on for couple of months (knock on wood)

Rob
Rob/Sanford....that's good news, as we do have choices besides buying another motor......
Mar 29, 2011, 10:52 AM
Registered User
sanman55's Avatar
Yep, thats the tower pro motor shaft, its at grayson, cheap and shipping a lot less.. so there you go...
Mar 29, 2011, 12:26 PM
Takeoff=Option Landing=Must
robusp's Avatar
Quote:
Originally Posted by sanman55
Yep, thats the tower pro motor shaft, its at grayson, cheap and shipping a lot less.. so there you go...
You are probably right. They come in a package of 3. Shipping wasn't that much ($3). I didn't like that it took 12 days to get it.

Rob
Mar 29, 2011, 08:53 PM
Screw the wind, let's fly!
Naval Warfare's Avatar

maiden


Got to fly mine a little more last night.Not my usual field, this was an unused road with trees and light poles on both sides.
Had a 45 degree cross wind making for some interesting moments as you will see.I gotta say,I love this plane. I cant wait for when I can get to my feld and have the room to fly it scale.

http://www.youtube.com/watch?v=TCxhVrF6k0Q
Mar 29, 2011, 09:15 PM
Don't Move I've Dropped My Nut
bamaguy's Avatar
Congrats! Nice flying, especially with the handicaps! My "Cruiser" will be delivered tomorrow....looking forward to get it in the air.
Mar 29, 2011, 10:22 PM
Registered User
NeilDahl51's Avatar

First maiden flight Sunday of Dynam Cruiser


Had a great first flight of the Cruiser Sunday.

Everyone thought it flew great.

Question... if you put the battery in with the Velcro... how do you get it back out?

Suggestions would be appreciated!!

Neil:
Last edited by NeilDahl51; Mar 29, 2011 at 10:25 PM. Reason: spelling
Mar 30, 2011, 07:16 AM
Wisdom can not be granted.
Orion Pax's Avatar
NW - Great flying and I love the lights on approach. Really sells the plane as real.

NeilDahl51 - I use velcro on mine and it pulls right out without any trouble.
Mar 30, 2011, 07:50 AM
Registered User
sanman55's Avatar
Simple, you can just use a very thin piece of metal, I have a 6 inch ruler thats very thin, pocket. Just jam it in and the battery will seperate.Also I sometimes use a thin piece of plastic,notebook paper holder,.. I also use it to place the battery in the plane..cover the velco,place in bird and pull out..the plastic..

sanford
Mar 30, 2011, 07:51 AM
Registered User
sanman55's Avatar
Nice Dale.. Would not like to fly that course though
Mar 30, 2011, 08:14 AM
Registered User
Naval,
Nice flying. You gotta out retract on her.
Mar 30, 2011, 08:16 AM
Screw the wind, let's fly!
Naval Warfare's Avatar
Quote:
Originally Posted by Orion Pax
NW - Great flying and I love the lights on approach. Really sells the plane as real.
Thanks OP, coming from a modeler of your caliber, I'm flattered.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold toyota land cruiser flynfred Cars - Trucks and Parts (FS/W) 0 Sep 27, 2010 05:48 PM
Discussion Groupner "Commodore" cabin cruiser oztruck Scale Boats 2 Sep 15, 2010 07:06 AM
Wanted controller for New Bright PT Cruiser jclush Cars - Accessories (FS/W) 0 Sep 11, 2010 12:31 PM
Sold Sea Cruiser II & Kadet Senior dls Aircraft - Fuel - Airplanes (FS/W) 3 Sep 06, 2010 04:46 PM
Discussion Sterling 32' Cruiser or the Berkley 22' Express Cruiser RussellTate Scale Boats 15 Oct 26, 2009 09:41 PM