Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Arcteryxxx, who may elect to delete unwanted replies.
Oct 26, 2010, 08:36 PM
Registered User
tho98027's Avatar
Nice. I've heard of a 22/40/2E, but not a 22/40/1E. Sounds like a sweet motor. Did you do any upgrades, bearings, internal fan? Have you measured no load or rm? Looking forward to flight results.
Sign up now
to remove ads between posts
Oct 27, 2010, 01:17 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by tho98027
Nice. I've heard of a 22/40/2E, but not a 22/40/1E. Sounds like a sweet motor. Did you do any upgrades, bearings, internal fan? Have you measured no load or rm? Looking forward to flight results.
Thanks! Haven't done any upgrades. I'm not experienced with motor surgery and think it would be wrong to start with this one... Haven't done any testing yet but the measured data (from MEGA) reads 2090kv and 2mohm resistance (1p).
I will post CC logs in a week or so. (if the weather allows)
Oct 27, 2010, 03:25 AM
Why the dirt on the wings?
moparmyway's Avatar
Quote:
Originally Posted by Arcteryxxx
Thanks! Haven't done any upgrades. I'm not experienced with motor surgery and think it would be wrong to start with this one... Haven't done any testing yet but the measured data (from MEGA) reads 2090kv and 2mohm resistance (1p).
I will post CC logs in a week or so. (if the weather allows)
How did you get the 2 milli-ohm reading ??
Oct 27, 2010, 04:43 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by moparmyway
How did you get the 2 milli-ohm reading ??
In a Mail from Dan... :-p
Oct 27, 2010, 09:31 AM
Registered User
tho98027's Avatar
Quote:
Originally Posted by moparmyway
How did you get the 2 milli-ohm reading ??
That's interesting. A MEGA 22/45/1e as a Rm of 0.005 for one phase. Seems like a 22/40/1E would have a Rm of 0.0045. Dan must somehow be stuffing more copper in there now.
Oct 29, 2010, 05:34 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar

Static on the BIG MEGA


Guess this motor is nothing short of a MONSTER!!!!

Static test with APC7*8 sport: 180amps, 25300 rpm at 13,3Volt. (Cold LiPo)
I almost soiled my pants!

Now where is that CC ICE150?
Last edited by Arcteryxxx; Oct 29, 2010 at 06:05 AM.
Oct 29, 2010, 06:16 PM
Why the dirt on the wings?
moparmyway's Avatar
Quote:
Originally Posted by Arcteryxxx
Guess this motor is nothing short of a MONSTER!!!!

Static test with APC7*8 sport: 180amps, 25300 rpm at 13,3Volt. (Cold LiPo)
I almost soiled my pants!

Now where is that CC ICE150?
Why waste your $$$ ??

Getting an ICE 150 would be like going backwards right now. You just tested the 7x8 @ 180 amps (3.325 volts per cell) 25,300 rpm correct ??

Your motor is not limited to that one battery.
You could parallel another smaller battery and run a Q-40 7.4x8 prop for 15 mph jump in top end speed. Go to 8x8 for another 10 - 15 mph again. Your motor can support 10 second bursts of well over 150 amps. Well over 200 amps. Even beyond 250 amps.

You need the ICE 200 right now Dude.
Oct 30, 2010, 05:34 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by moparmyway
Why waste your $$$ ??

You need the ICE 200 right now Dude.
Guess it's time for me to get myself a birthday present...

Where can I find the best deals? (Best I've found so far is USD 254,-at toddsmodels.com)
Last edited by Arcteryxxx; Oct 30, 2010 at 05:43 AM.
Nov 01, 2010, 03:03 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar

New build


My newest build hangin' to dry after receiving a epoxy top coating.

As I started with the viking stuff last time (Sleipner) I had to follow up by this one: Hägar
Nov 01, 2010, 03:40 PM
Why the dirt on the wings?
moparmyway's Avatar
Quote:
Originally Posted by Arcteryxxx
My newest build hangin' to dry after receiving a epoxy top coating.

As I started with the viking stuff last time (Sleipner) I had to follow up by this one: Hägar
DANG !!!!!!!!!!!!!!
Everybody is gunna think that you bought one of mine !!!!!
That looks very familiar !!!!

Even the bottom stripes

I see the hinged hinges, it will be better than fabric. Your elevon hangs back further this way. You are going to need every advantage you can think of for the real heavies !!!!


Looks great !!!!
Nov 01, 2010, 03:44 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by moparmyway
DANG !!!!!!!!!!!!!!
Everybody is gunna think that you bought one of mine !!!!!
That looks very familiar !!!!

Even the bottom stripes

I see the hinged hinges, it will be better than fabric. Your elevon hangs back further this way. You are going to need every advantage you can think of for the real heavies !!!!


Looks great !!!!
Mopar: You're my inspiration!!!!!
Nov 02, 2010, 04:29 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar

The FAST and the FURIOUS


Hägar at 90% ready...
Nov 03, 2010, 03:44 AM
Registered User
Peter M's Avatar
Peter,
Hagar looks the business - especially when you start putting 250amps through that motor!

Are you far off maidening or are you still waiting for your ICE 200?

BTW Are Toddmodels the cheapest place to by CC speedies? Why do I ask?
Well I finished my last uni exam for the year and I think you may need a bit of friendly rivalry!

Regards
Peter
Nov 03, 2010, 08:47 AM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Quote:
Originally Posted by Peter M
Peter,
Hagar looks the business - especially when you start putting 250amps through that motor!

Are you far off maidening or are you still waiting for your ICE 200?

BTW Are Toddmodels the cheapest place to by CC speedies? Why do I ask?
Well I finished my last uni exam for the year and I think you may need a bit of friendly rivalry!

Regards
Peter
Soon ready for maiden, but it might not be with the Frankenstein MEGA.
Still not ordered the 200 and am contemplating what to do. Discussing solutions with the chief wiz'es...

Toddsmodels are cheapest I've found so far, but a little more searching won't hurt.

Congrats on finishing your exams and as far as a competition goes; YOU'RE ON!!!!
Nov 05, 2010, 04:40 PM
Livin it UP when Im goin DOWN
Arcteryxxx's Avatar
Getting ready for maiden... All lights green with a weak 36mm... Will be running a 7*7 at 23k rpm and 95Amps... Testing CG

Thread Tools