Mount #1 - Trojan with HK motor mount - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by Toppers, who may elect to delete unwanted replies.
Sep 27, 2010, 11:35 AM
Registered User
Toppers's Avatar

Mount #1 - Trojan with HK motor mount

This was my first custom mount and used the gold alu mount from HK. The pictures really tells the story but here's some of the details...

Cut out disc from 1/4" ply. After marking and drilling the holes for the firewall screws and the motor mount screws, I drilled out the centre to allow cooling air to the ESC and battery. The motor mount screws were counter-sunk.

The motor was mounted behind the front of the mount to allow me to use the stock prop adapter (I like the stock Trojan props) (which also really protects the motor is it's own safety cage). Cowl fits with very little adjustment (not shown).

Final two pictures show the motor post a major nose in which wrote off the fusilage. The motor shaft snapped cleanly off but was otherwise undamaged. The motor has been reused since the other way around, with the bolt on Turnigy prop adapter.
Last edited by Toppers; Sep 27, 2010 at 11:42 AM.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
For Sale NEW AND LIKE NEW PZ BRUSHLESS Charger, ESC, Motors!!! Kevin Greene Aircraft - Electric - Power Systems (FS/W) 0 Sep 12, 2010 06:41 AM
Sold PZ Sukhoi SU-26m new rx 2 chargers 2 batts 2 motors 2 extra shafts xtra linkage n box blueindian Aircraft - Electric - Micro & Indoor Airplanes (FS/W) 0 Aug 19, 2010 02:18 AM
Wanted PZ Corsair wing mounting hardware dale4040 Aircraft - General - Miscellaneous (FS/W) 0 May 09, 2010 09:08 AM
Sold Talking Timer with Custom DX7 Mounting Bracket jimsky Aircraft - General - Radio Equipment (FS/W) 4 Dec 05, 2009 11:04 PM