Thread Tools
Dec 06, 2012, 10:11 AM
Jakub J's Avatar
Quote:
Originally Posted by tazdevil
...
this is the 25 mm version or 21.5 on the picture ?
is it in full carbon?
arms - carbon 25mm, 1mm thick wall,
center - carbon 2.5mm thick,

small parts like cage, controller board, batery plates etc - fiberglass.

J.
Sign up now
to remove ads between posts
Dec 06, 2012, 12:22 PM
Registered User
Aaalie's Avatar
Congratulations with all the new frame's, they are all beauty's, en the price is good. Curious about the Octo.
Dec 07, 2012, 01:48 PM
Registered User
its friday!
Dec 08, 2012, 02:31 AM
Jakub J's Avatar
Quote:
Originally Posted by warthox
its friday!
I lost one day DO you still thinking about 15" propellers?

q
Dec 08, 2012, 04:35 AM
Registered User
Quote:
Originally Posted by Jakub J
I lost one day DO you still thinking about 15" propellers?

q
yes.
Dec 08, 2012, 05:15 AM
Still flying
Ramnes's Avatar
Quote:
Originally Posted by warthox
yes.
15" propellers, i have a plane with a 14" propeller and thats big. on what multicopter frame are you going to use them, and what motors, ESC's?

J
Dec 08, 2012, 09:43 AM
Jakub J's Avatar
Quote:
Originally Posted by warthox
yes.
685mm motor 2 motor will be ok?

q
Dec 08, 2012, 09:56 AM
Registered User
I need a Y6 for pancake (MN4010/12 etc) and 15x5,5 CF

Lens is 12mm (APC-S) so must be wide LG.
Dec 08, 2012, 12:38 PM
Jakub J's Avatar
Warthox 4 QUADcopter

Arms - 25mm carbon 1mm wall 325mm long.
685mm motor to motor diameter.

Center boards - 2.5mm 100% carbon.

Propellers - up to 15".









Jakub
Dec 09, 2012, 05:14 AM
Registered User
Hi Jakub,
Is it good for X8 configuration? Max thrust per arms in X8 conf?
Dec 09, 2012, 05:18 AM
Jakub J's Avatar
Quote:
Originally Posted by to22ni
Hi Jakub,
Is it good for X8 configuration? Max thrust per arms in X8 conf?
ANY 25mm arms are really stiff.
But remember - shorter arms are stiffer than longer arms,
so use a shorter arms if you can...

q
Dec 09, 2012, 07:04 AM
Registered User
Hello Jakub when you know the price of hexa with 25mm arms
Dec 09, 2012, 11:02 AM
Registered User
Tepaja's Avatar
Itīs nice to see Jakub that you have managed to do so many fascinating frames. And itīs hard to deside what frame I should order next from you. And thank you that you keep your prices so reasonable.

If I read right, you mentioned you are waiting power distribution boards to hexa etc.. What is continuous amps that these will handle.
Dec 10, 2012, 08:28 AM
Registered User
Quote:
Originally Posted by Jakub J
Warthox 4 QUADcopter

Arms - 25mm carbon 1mm wall 325mm long.
685mm motor to motor diameter.

Center boards - 2.5mm 100% carbon.

Propellers - up to 15".








looks very solid
385mm should be ok.
Dec 10, 2012, 01:18 PM
Jakub J's Avatar
OCTO fun flying

octo fun flying (1 min 53 sec)


J.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold RTF 330x w/Termniator AP/AV (pan and tilt) frame and original frame RTF!!! wac Aircraft - Electric - Helis (FS/W) 18 Oct 01, 2010 10:08 AM
Heliup.com CNC CF Shogun/Zoom frame build thread/review Hoverup Mini Helis 123 Jun 18, 2005 09:09 PM
Trex Mh upgrades build thread+New CF frame review Philpops Mini Helis 127 May 29, 2005 06:04 AM
Trex Mh upgrades build thread+New CF frame review Philpops Mini Helis 77 May 23, 2005 10:40 PM