Thread Tools
Old Nov 19, 2012, 11:36 AM
asaloca is offline
Find More Posts by asaloca
Registered User
asaloca's Avatar
Ohhh forgot..

Using SONY 760CX .

FRED
Sign up now
to remove ads between posts
Old Nov 19, 2012, 11:37 AM
flitelab is offline
Find More Posts by flitelab
flitelab's Avatar
Here is the counterweight I added as a temporary test. Out of the box the gimbal is totally out of balance due to the heavy servo on one side. Depending on the camera used you can add some weight to make it more neutral. I just pulled the roll gear so it would move freely to find a balance point.

Doesn't solve all the issue but seems to help. Also making sure the gears are tight helped with minor sloppiness.



Site Sponsor
Old Nov 19, 2012, 12:03 PM
tazdevil is online now
Find More Posts by tazdevil
FPV Junkie
tazdevil's Avatar
arf can't wait to the guimball cpu came out...!


Nice job Jackub
Old Nov 23, 2012, 12:59 PM
Rogier is offline
Find More Posts by Rogier
Registered User
Has anyone tried the MK HiSight SLR2 under the Heavy Weight SIX? I can't wait longer on the CInestar solution, so I'm looking for another gimbal. So was wondering if anybody ever tried this gimbal.
Old Nov 23, 2012, 02:10 PM
gondoflier is offline
Find More Posts by gondoflier
Registered User
wait on cinestar solution?
Old Nov 23, 2012, 02:35 PM
Rogier is offline
Find More Posts by Rogier
Registered User
Quote:
Originally Posted by gondoflier View Post
wait on cinestar solution?
Yes... landing legs, adapter plate, battery solution...... Look few pages back, Jakub should be ready.
Old Nov 23, 2012, 06:11 PM
wankel83 is offline
Find More Posts by wankel83
Registered User

Standard motor mount


Hello guys, can someone (Jakub first) confirm if can i mount the T-motors MT3506

(19mm hole diameter and 41mm external d) on standard motor mount (for 16mm booms) ?
Old Nov 24, 2012, 10:23 AM
gondoflier is offline
Find More Posts by gondoflier
Registered User
did I understand correctly that jakub will have new gimbals soon? or is it just gimbal attachments? ..any way, all of your products look very solid and well priced..I hope you make a good gimbal as well and than I won't have to look anywhere else for my copters
Old Nov 24, 2012, 10:26 AM
flitelab is offline
Find More Posts by flitelab
flitelab's Avatar
He is just finishing off his gimbal controller. An actual gimbal will come later but that may be a ways off yet.
Site Sponsor
Old Nov 24, 2012, 10:55 AM
Jakub J is offline
Find More Posts by Jakub J
Jakub J's Avatar
Hi guys

A few words of explanation. This year was very heavy -
we were not expecting such a big interest in our products

Recently I bought another CNC, hired more employees,
and now we can work much more efficiently!

Nearest plans:
- BIG legs, for pro level gimbals AV130, AV200, Cinestar (this week),
- medium weight OCTO with 21.5 tubes (this week),
- QUAD with 21.5mm arms,

Next:
- advanced gimbal controller (official presentation in two weeks,
sale start December I hope),
- Christmas (<> 24.December ).

In the meantime:
- belt driven small GoPro gimbal. Prototype is almost ready. We will test
it asap and run production in December. Sale start - January. This gimbal
will be much more complicated in production than current version, but
give us much better video quality (probably ).

From January:
- Lunar Explorer succesor - universal quad frame. Cheaper and better than
previous version.
- a few not expensive small size frames - quad, six, tri maybe...
- bigger, pro level gimbals,
- and much, much more

Thank you for your patience

Jakub
Site Sponsor
Old Nov 24, 2012, 11:23 AM
Jakub J is offline
Find More Posts by Jakub J
Jakub J's Avatar
New legs for heavy/big copters - <> 310mm clerance, span of the base (skids) 500x500mm:



With AV130 gimbal:


I'll do smaller version for AV130 probably...

With AV200 gimbal:



Compared to 155mm legs



Adapter for 2-axis Cinestar will be avialable too - I'm just testing it.

Jakub
Site Sponsor
Old Nov 24, 2012, 11:55 AM
Aaalie is offline
Find More Posts by Aaalie
Registered User
Aaalie's Avatar
Thank God, he's still alive!!!
Old Nov 24, 2012, 12:36 PM
acuralegendz is offline
Find More Posts by acuralegendz
What goes up...
acuralegendz's Avatar
Quote:
Originally Posted by flitelab View Post
Here is the counterweight I added as a temporary test. Out of the box the gimbal is totally out of balance due to the heavy servo on one side. Depending on the camera used you can add some weight to make it more neutral. I just pulled the roll gear so it would move freely to find a balance point.

Doesn't solve all the issue but seems to help. Also making sure the gears are tight helped with minor sloppiness.



This looks good, is this the new prototype for Jakubs gimbal? What servos are you using?
Old Nov 24, 2012, 12:38 PM
flitelab is offline
Find More Posts by flitelab
flitelab's Avatar
Quote:
Originally Posted by acuralegendz View Post
This looks good, is this the new prototype for Jakubs gimbal? What servos are you using?
No that is the Gaui Crane 3, it is the Jakub hex and legs however.
Site Sponsor
Old Nov 24, 2012, 12:40 PM
flitelab is offline
Find More Posts by flitelab
flitelab's Avatar
Quote:
Originally Posted by Jakub J View Post
Hi guys

A few words of explanation. This year was very heavy -
we were not expecting such a big interest in our products

Recently I bought another CNC, hired more employees,
and now we can work much more efficiently!

Nearest plans:
- BIG legs, for pro level gimbals AV130, AV200, Cinestar (this week),
- medium weight OCTO with 21.5 tubes (this week),
- QUAD with 21.5mm arms,

Next:
- advanced gimbal controller (official presentation in two weeks,
sale start December I hope),
- Christmas (<> 24.December ).

In the meantime:
- belt driven small GoPro gimbal. Prototype is almost ready. We will test
it asap and run production in December. Sale start - January. This gimbal
will be much more complicated in production than current version, but
give us much better video quality (probably ).

From January:
- Lunar Explorer succesor - universal quad frame. Cheaper and better than
previous version.
- a few not expensive small size frames - quad, six, tri maybe...
- bigger, pro level gimbals,
- and much, much more

Thank you for your patience

Jakub
Jakub - Sounds great! Let me know when they are ready so I can get an order placed to carry here in Canada. When you have a chance send me an email with the latest pricing and info and I will get an order off to you.
Site Sponsor


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Sold RTF 330x w/Termniator AP/AV (pan and tilt) frame and original frame RTF!!! wac Aircraft - Electric - Helis (FS/W) 18 Oct 01, 2010 11:08 AM
Heliup.com CNC CF Shogun/Zoom frame build thread/review Hoverup Mini Helis 123 Jun 18, 2005 10:09 PM
Trex Mh upgrades build thread+New CF frame review Philpops Mini Helis 127 May 29, 2005 07:04 AM
Trex Mh upgrades build thread+New CF frame review Philpops Mini Helis 77 May 23, 2005 11:40 PM