Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 21, 2010, 10:22 AM
The building never ends!
Quote:
Originally Posted by KRIS...
Well, they're selling them in packs of eleven for ~$50 for the cheapest block. Each block will give you two bases, since you don't need it to be an inch thick. So . . . for $50, you can have up to 22 bases to make stands out of. Another $22 will give you over four yards of 10x10mm acrylic bar. So, if each stand was 6.5" tall, you're talking $3.28 per stand, not including whatever method you choose to use to affix a plane to it. You could sell them for, like, $10 - $15 shipped, or something. Or add another 21 micro planes to your collection and have a stand for each of them.
Sign up now
to remove ads between posts
Oct 21, 2010, 11:57 AM
Registered User
microheli's Avatar
Quote:
Originally Posted by Ensign Jimmy
Or add another 21 micro planes to your collection and have a stand for each of them.
I estimate 21 planes are only 4 years
Nov 08, 2010, 07:32 PM
Registered User
hey guys just a general question about the micro t 28 on the stock brick there are 2 other ports one inbetween the rudder and elevator servos and one by the aileron servo port what are these for anyone know thanks chris

oh and annother thing i noticed was were the motor plugs into the brick theres a 3 port plug and the stock motor only uses 2 anyone know why this is the way it is
Last edited by mitchll1088; Nov 08, 2010 at 07:41 PM. Reason: spelling error and annother question
Nov 08, 2010, 11:29 PM
Registered Addict
Kris...'s Avatar
Quote:
Originally Posted by mitchll1088
hey guys just a general question about the micro t 28 on the stock brick there are 2 other ports one inbetween the rudder and elevator servos and one by the aileron servo port what are these for anyone know thanks chris
Here you go

Nov 09, 2010, 03:57 PM
Registered User
sweet deal man thanks alot
Nov 09, 2010, 03:59 PM
Registered User
so now that i see i can just plug and play a brushless motor with this esc does anyone have a motor reccomendation
Nov 09, 2010, 04:26 PM
DX5e fatal flaw- PM me!!!!
Quote:
Originally Posted by mitchll1088
so now that i see i can just plug and play a brushless motor with this esc does anyone have a motor reccomendation
Ima totalnoob, but my guess is this does not perform as an ESC, but the output port can be configured to control an ESC.


Dave
Nov 10, 2010, 08:45 AM
So broke I can't pay attention
Quote:
Originally Posted by CNY_Dave
Ima totalnoob, but my guess is this does not perform as an ESC, but the output port can be configured to control an ESC.


Dave
It is a combo ESC, reciever with two onboard linear micro servo's.
Here is a link to the manual: http://www.spektrumrc.com/ProdInfo/Files/SPMAR6400L.pdf
Nov 10, 2010, 09:28 AM
DX5e fatal flaw- PM me!!!!
Quote:
Originally Posted by caymin last
It is a combo ESC, reciever with two onboard linear micro servo's.
Here is a link to the manual: http://www.spektrumrc.com/ProdInfo/Files/SPMAR6400L.pdf
I was looking at this-

"Compatible with external brushless speed controls (optional)"

and thinking that meant it could control an ESC but was not an ESC (brushless motor driver) itself.

Dave
Nov 10, 2010, 11:33 PM
Weekend Hacker
you are right Dave, the brushless setup is optional. My understanding, is the only spektrum UM board that is brushless is the Beast board (AR6400LBL).
Dec 20, 2010, 02:07 AM
You torquing to me?
slyfoxflyer66's Avatar
Wait a minute what is that xport thing on the brick? will parkzone be making xport accessories for UM like hobbyzone did with the super cub?
Dec 20, 2010, 09:06 AM
Power Wheels Guru
UNGN's Avatar
Quote:
Originally Posted by slyfoxflyer66
Wait a minute what is that xport thing on the brick? will parkzone be making xport accessories for UM like hobbyzone did with the super cub?
They haven't in the 2+ years the AR6400 has been out.
Dec 20, 2010, 11:41 AM
Klutzsquatch
mgroves's Avatar

mods


Anyone tried any other props (other than the three blade noted early in the thread)...i know that the Shukoi performed much better with a gws prop than the stock one.
Dec 20, 2010, 11:48 AM
Registered User
I think this is the same motor as the mustang. On my mustang I put on a GWS 4530 prop with one of their spinners as the prop adapter. That combined with the turnigy 160 mah battery i am getting more power and 10 min flight times.
Dec 20, 2010, 11:51 AM
DX5e fatal flaw- PM me!!!!
5043 prop (I think) has been mentioned when used with this motor (on a champ micro).

Dave


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ParkZone Ultra Micro T-28!!! THE Owners Thread!!!! RM_Sparks Micro Ready-to-Fly 10863 Jun 23, 2017 03:15 PM
Discussion Parkzone Ultra Micro T-28 Trojan tonebone Scratchbuilt Indoor and Micro Models 206 Jun 16, 2011 09:17 PM
Discussion Micro T-28 owners and mods thread! Bowerz Micro Ready-to-Fly 22 Nov 13, 2010 05:48 PM
Alert SOLD For sale Brand new Parkzone MIcro T-28 rudyhal Atlanta Area RC 12 Sep 24, 2010 10:51 AM
Discussion Parkzone T-28 Flaps Mods Question captaintomo Parkflyers 26 Feb 17, 2010 04:25 PM