Thread Tools
Apr 22, 2012, 02:01 PM
Mile High EDF
420flyboy's Avatar
I need to look into this crow setup. I have a 8ch rec. and dx8 , should work.
Sign up now
to remove ads between posts
Apr 22, 2012, 02:17 PM
Registered User
ZACATTACK's Avatar
Quote:
Originally Posted by 420flyboy
I need to look into this crow setup. I have a 8ch rec. and dx8 , should work.
http://www.wattflyer.com/forums/arch.../t-3562.htmlon

A small discussion on "Crow" or "Butterfly" set up.You can also google Crow set-up for 8 channel TX and lots hits come up on the sreen.
Apr 22, 2012, 05:58 PM
Mile High EDF
420flyboy's Avatar
Worked better today, this jet is so awesome it made its back after I thought it was lost. It's hard to tell sometimes which way it's going or coming , up or down, get out a little ways and it can get scary, love the adrenalin rush

Habu 32 (5 min 10 sec)
Apr 22, 2012, 09:00 PM
edf flyer
Mannyman535's Avatar
I need the crow mix for my habu. Throws wold be great as well

Help please. I'm using a 7ch rec.
Apr 22, 2012, 09:53 PM
Registered User
ZACATTACK's Avatar
Quote:
Originally Posted by Mannyman535
I need the crow mix for my habu. Throws wold be great as well

Help please. I'm using a 7ch rec.
Here's a mix for a Futaba 7 channel & DX7...???

http://livingstonrc.com/crow_setup__...utaba__7ch.htm
http://www.horizonhobby.com/pdf/Radi..._DX7_setup.pdf

Please tell the radio you use!! I try to help but I'm guessing at the Radio your using with that question.Hope this helps but try to be specific when asking for help with Tx set-ups.
Last edited by ZACATTACK; Apr 22, 2012 at 10:04 PM.
Apr 22, 2012, 09:56 PM
Keith Thomas
keithtsr's Avatar
Another radio question, does anyone know how to fix this problem. I have a 11X. I am running the elevator on 2 separate channels, when I drop the flaps to land only one of the elevators comes down. I have them mixed together and the aux is slaved to the elevator.
Apr 22, 2012, 10:49 PM
Hey Ya'll!! Watch THIS!!
Michael Paxton's Avatar
In the mix for down ele with flaps are you mixing the ele master not the slave?
Apr 22, 2012, 10:55 PM
Keith Thomas
keithtsr's Avatar
I'm mixing the elev. as the master. The trims work fine just not the flap function.
Apr 22, 2012, 11:12 PM
Registered User
Husafreak's Avatar
Sunday is almost over!
Apr 22, 2012, 11:20 PM
Hey Ya'll!! Watch THIS!!
Michael Paxton's Avatar
Ok. If you don't have a place you can just bind the two channels for dual ele, you can either turn on delta or make a second mix for the channel that is not reacting to flap mixing.
But I think you can turn off your mix and somewhere there is a place you can just pair the two channels as one.
Apr 22, 2012, 11:22 PM
Registered User
Tamjets's Avatar
Quote:
Originally Posted by Husafreak
Sunday is almost over!
That what make me so sad.
Apr 22, 2012, 11:24 PM
Hey Ya'll!! Watch THIS!!
Michael Paxton's Avatar
.....Just this one....There's still more to come!
Apr 22, 2012, 11:32 PM
Registered User
Tamjets's Avatar
Quote:
Originally Posted by Michael Paxton
.....Just this one....There's still more to come!
I know.....there is more nice sunday to play with.
Apr 22, 2012, 11:40 PM
Keith Thomas
keithtsr's Avatar
Quote:
Originally Posted by Michael Paxton
Ok. If you don't have a place you can just bind the two channels for dual ele, you can either turn on delta or make a second mix for the channel that is not reacting to flap mixing.
But I think you can turn off your mix and somewhere there is a place you can just pair the two channels as one.
I'll give that a try, thank you. If I can't get it I will just Y them.
Thanks again Michael.
Apr 23, 2012, 01:48 AM
Registered User
What did you use for the label for the second elevator? If you used an aux channel than it will only mix the elevator channel and not the aux, even though it is the second elevator. Had to deal with that on my f22 when trying to program air brakes.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Fiberglass Habu Airframe Calvin_220 Electric Ducted Fan Jet Talk 92 Nov 10, 2012 02:53 AM
Sold New in box Habu EDF PNP flyboy1945 Aircraft - Electric - Jets (FS/W) 2 Aug 01, 2010 08:24 PM
Discussion ESC very HOT - Sorry the discussion is moved to the Habu thread SalamSyed Foamy EDFs 0 Mar 20, 2010 11:15 PM
New Product New Fiberglass EDF Jets!!! Starfire + EDF Trainer nitroplanes Nitro Planes 0 Jan 24, 2009 09:58 AM
Discussion Baja SS Speculation and hopup thread. DaveESPI Large Scale Cars 3 Feb 03, 2008 07:39 PM