Thread Tools
Old Sep 14, 2010, 12:22 PM
jdraughn is offline
Find More Posts by jdraughn
Registered User
Discussion

Need advice with my Gentle Lady build.


Hi, this is my first post here. I owned a Gentle Lady glider about 15 years ago when I was a teen and am looking to get back into the hobby again.

I bought another Gentle Lady kit second hand that appeared to have all the parts (older kit, at least as old as the original one I put together 15 years ago), but as I was putting it together I realized I have 4 sheets of the ribs #6001 and none of #6002, instead of 2 of each.

I have been using some of the ribs from the extra #6001 sheets to finish up the inner wing panels, but now that I am to the wing tips, I need smaller ribs. I can make some educated guesses by cutting up some of my extra ribs so the spar holes line up, and then sanding away the excess height, but I would prefer that they are exactly to spec.

I e-mailed support at the Carl Goldberg website and am awaiting a reply. Does anyone have any ideas?

If anyone could scan one of their #6002 panels and send it to me so I could finish up my wing I would be very appreciative. I don't have much money and cannot afford to spend the 12 bucks to order the plans online.
Sign up now
to remove ads between posts
Old Sep 14, 2010, 04:16 PM
markb0127 is offline
Find More Posts by markb0127
Celebrating 300 posts!
markb0127's Avatar
https://www.rcgroups.com/forums/showthread.php?t=882058

This thread has a CAD drawing of the Gentle Lady. It has the CAD file in post #21 and images of the CAD drawing in post #10.

It was drawn with a program called Rhino 3D. I did a quick search and it looks like you can download a trial version of it. Then, maybe you can take the file and break it down to just the ribs you need and print them out in 2D.
Old Sep 14, 2010, 06:57 PM
jdraughn is offline
Find More Posts by jdraughn
Registered User
Thanks for your reply. I did check that out, but it appears I can only move the plane and the camera around and I don't know enough about Rhino to break out those ribs I need, line them up on a plane and print them to scale.

I did get a reply back from the Carl Goldberg website, I gave them my address so they could mail me the drawings I need. I wish I didn't have to wait, the fuselage and tail is done, i'm basically stuck waiting on my wing tips.
Old Sep 15, 2010, 03:54 PM
b7gwap is offline
Find More Posts by b7gwap
It's Prime Time for Slime Time
b7gwap's Avatar
Quote:
Originally Posted by jdraughn View Post
Thanks for your reply. I did check that out, but it appears I can only move the plane and the camera around and I don't know enough about Rhino to break out those ribs I need, line them up on a plane and print them to scale.

I did get a reply back from the Carl Goldberg website, I gave them my address so they could mail me the drawings I need. I wish I didn't have to wait, the fuselage and tail is done, i'm basically stuck waiting on my wing tips.
That's pretty cool of Goldberg to send you custom drawings like that. Worth the wait, I would say.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Need advice on my sig kadet senior build vwyodapink Glow to Electric Conversions 8 Jan 08, 2011 11:13 PM
Build Log Gentle Lady build(a reunion with an old friend) jwhitacre Sailplane Talk 20 Oct 06, 2010 04:29 PM
Help! Gentle Lady Scratch with Wing Mods (Oh and Hello!) lowrent Sailplane Talk 4 Dec 23, 2009 06:23 PM
Help! Gentle Lady Build Rick T. Slope 12 Sep 12, 2009 12:02 AM
Need help fine tuning my Gentle Lady amike_321 Thermal 64 Jun 16, 2004 09:08 PM