Thread Tools
Sep 18, 2010, 05:38 PM
Wave Riding Vehicles
HYDROJERRY's Avatar
Now that is totally cool looking,,good work Stringfly..
Sign up now
to remove ads between posts
Sep 18, 2010, 08:29 PM
I feel the need for speed!
scorpion1's Avatar
Nice looking String!! Lets see it run tomorrow with Bruces..........he said he's gonna be lipo ready!!
Sep 18, 2010, 08:52 PM
Registered User
STRINGFLY's Avatar
Thanks guys... it was fun. If the color doesn't last will just paint later on.
Yes... Bruce will have his tomorrow also to run. Bring the camera, be the first to have two Geico's running together. Meet you around 12:00.

Stringfly <>+++++
Sep 18, 2010, 08:54 PM
I feel the need for speed!
scorpion1's Avatar
Best i can do is about 12:15............dont run your batts down, i got the vid camera charging as we speak!
Sep 18, 2010, 09:50 PM
Registered User
STRINGFLY's Avatar
Ok,... will be hot tomorrow. Will bring the boat cam too.

Stringfly <>++++
Sep 19, 2010, 03:34 PM
Registered User
thomaslambo's Avatar
Stringfly.....nice touch on the orange and we're looking forward to some videos
Sep 19, 2010, 10:02 PM
Registered User
STRINGFLY's Avatar

Gieco Galore


Got to run mine with the other Geico today. Both ran pretty good. scorpion1 is downloading some video. I did have to keep moving batteries (Nimh for the first runs, then lipos) forward to stop the bouncing. I don't know where they get the 9 inch C/G position. Its way too bouncy at that setting. Mine are even forward of the rear of the ply battery tray. Love how it handles in turns though.... like on rails and full throttle. Just running stock prop so should do much better when I get the X642.

Stringfly <>++++++
Sep 19, 2010, 10:18 PM
I feel the need for speed!
scorpion1's Avatar
Here's the vid:

Geico's Galore (3 min 17 sec)
Sep 19, 2010, 10:27 PM
Boomer1
Boomer1's Avatar

Great video


Suggest you guys review post #101 and the video. It provides good insights into setting up Miss G.
I should have my new prop when I get back home so I will be trying this fellows suggestions.
Some go match racing!
Boomer
Sep 19, 2010, 10:36 PM
I feel the need for speed!
scorpion1's Avatar
Here's a stocker with a 642 on 5s..............

(4s first..then 5)


Proboat Miss Geico (2 min 20 sec)
Sep 20, 2010, 07:12 AM
Registered User
wparsons's Avatar
Quote:
Originally Posted by STRINGFLY View Post
Got to run mine with the other Geico today. Both ran pretty good. scorpion1 is downloading some video. I did have to keep moving batteries (Nimh for the first runs, then lipos) forward to stop the bouncing. I don't know where they get the 9 inch C/G position. Its way too bouncy at that setting. Mine are even forward of the rear of the ply battery tray. Love how it handles in turns though.... like on rails and full throttle. Just running stock prop so should do much better when I get the X642.

Stringfly <>++++++
If you're finding it's still bouncing too much even with the CG way forward, you might have to adjust the thrust line a bit to keep the nose down ever so slightly.

You can also fine tune it more if you lower the prop if the rear is too wet, raise it if the rear is too loose.
Sep 20, 2010, 08:09 AM
Registered User
STRINGFLY's Avatar

Thanks.


Thanks guys for the comments. Yes Boomer1 I have reviewed his comments a bunch and watched the video. It just must be HIS power (5S) and prop differences that allows him to run the C/G that far back without much bouncing. My strut is flush with top like he says, my strut angle is 0. I started with two six cell 5000 nimh packs then tried 4s 5000 lipos , all still with stock prop. Will get a prop coming and will play with the strut angle first (you have a minute amount it will adjust) then play with the height some, that's about all the adjustment you have short of battery shifting. I can sharpen, balance and polish the new prop but not very sure about his thinning and cupped version.??????
Boomer1 have you run yours some more ? What are you running ?, batteries, prop and how did it do in relation to the bouncing?
Question:
When running 5s are you basically running a 3 cell and 2 cell pack (same mah) and which side do you put the 3 cell (heavier)pack on usually ??

Stringfly <>+++++
Sep 20, 2010, 09:07 AM
I feel the need for speed!
scorpion1's Avatar
String, if you were to run a 2s and a 3s put the 3s on the port side.
Sep 20, 2010, 10:40 AM
Registered User
STRINGFLY's Avatar

port side


Gotcha... port, left..... red for port wine.

stringfly <>+++++
Sep 20, 2010, 02:17 PM
Registered User
thomaslambo's Avatar
Quote:
Originally Posted by scorpion1 View Post
Here's a stocker with a 642 on 5s..............

(4s first..then 5)


http://www.youtube.com/watch?v=TsZmdN6FsIs
Dang, that thing screams on 5s with the x642 prop....how long do you guys think the motor will last?


Quote:
Originally Posted by scorpion1 View Post
String, if you were to run a 2s and a 3s put the 3s on the port side.
When using 2s and 3s batteries in a serial setup (5s) do you need to match Mah size?
Last edited by thomaslambo; Sep 20, 2010 at 02:41 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Bluefish Maiden Voyage linerfanatic Scale Boats 4 Nov 14, 2010 05:34 PM
Video Calypso's maiden voyage 15 september 2009 dan.lord Dock Talk 4 Sep 20, 2009 08:24 AM
Help! F4 Maiden Voyage Motor Blew up f355 Banana Hobby 16 Sep 17, 2009 01:35 AM
Video YAPT Yet Another PT 109 Maiden Voyage daemuon Dock Talk 5 Sep 16, 2009 03:34 PM
Discussion Disney Nautilus has her Maiden Voyage! Nemo Submarines 16 Sep 11, 2009 11:45 AM