Thread Tools
Old Nov 24, 2012, 08:23 PM
Apphoard is offline
Find More Posts by Apphoard
Registered User
Apphoard's Avatar
Weird my push rod is connected to the bottom hole furthest away from the elevator wing. Where is yours connected? Which one would give me the most movement the bottom?
Sign up now
to remove ads between posts
Old Nov 24, 2012, 09:19 PM
TheCure is offline
Find More Posts by TheCure
Wats the worst that can happen
TheCure's Avatar
Thats the position that will give you the least travel.
Closer to the wing increases throw.
Old Nov 25, 2012, 12:06 AM
comanch is offline
Find More Posts by comanch
Registered User
Could it be too nose heavy. Haven't seen an 800mm FMS bird that didn't fly well with pushrods on outer horn positions. Things just happen a little quicker as the pushrods get positioned closer to the control surfaces, as deflection becomes greater.
Old Nov 25, 2012, 01:37 PM
Apphoard is offline
Find More Posts by Apphoard
Registered User
Apphoard's Avatar
I will move them to the center holes. I did ad about 28 grams to the nose. Which made my CG 45mm.
Old Nov 25, 2012, 07:42 PM
comanch is offline
Find More Posts by comanch
Registered User
The one I have handles well at 55 - 60mm, measured from just outside the leading edge inlet. If you look back from the leading edge to the two panel lines that are about 7mm apart ( coming off the fuse and running outboard), that is the spot. All my pushrods are set to middle holes and its a fun bird.
Old Nov 26, 2012, 02:34 PM
Apphoard is offline
Find More Posts by Apphoard
Registered User
Apphoard's Avatar
I am guessing I didn't need the weight up front then to get the 45mm. I am new to the planes. I went back out and broke my last three bladed prop before it got off the ground . I need to find a more durable cheap alternative for this stock setup. Well I have a 1300 2s pack. Do you all know of a good prop for my setup? I see people saying 8x6, 7x5 I would think those would be way to big for this plane.
In the meantime I ordered the HK Radjet 800. It's probably a little to fast for me. But I think I will be ok with enough airspace I hope. So I am going to try and find a better spot to fly.
Old Nov 26, 2012, 05:42 PM
Banjofrog is offline
Find More Posts by Banjofrog
Geez That's A Big Fly
Banjofrog's Avatar
7x5 two blade prop is too small, the standard is 7x6x3, HobbyKing does sell them but a MAS will be stronger.

Shaun.
Old Nov 26, 2012, 06:46 PM
fathergoat is offline
Find More Posts by fathergoat
How do I land this thing?
fathergoat's Avatar
GWS 8x6 2-blade works great. In fact that's what I fly with 1300mah 2s packs.
Old Nov 26, 2012, 06:48 PM
DRAMJET is offline
Find More Posts by DRAMJET
2 metre rule applies!
DRAMJET's Avatar
2 blade 7060 on stock esc and 3 cell, has worked so well on my F4u and now on the A1.
Old Nov 26, 2012, 11:22 PM
comanch is offline
Find More Posts by comanch
Registered User
I'm running a ground down 800mm Spitfire prop on mine with 3s. On the stock setup a 2 blade from the Mustang or Spit would work as well. Much stronger than the 3 blade.
Old Nov 27, 2012, 09:02 AM
Apphoard is offline
Find More Posts by Apphoard
Registered User
Apphoard's Avatar
So would this prop here work? Is the adapters and a nut all I need to mount it? Thanks for your help guys

http://item.mobileweb.ebay.com/viewi...id=93670359695
Old Nov 27, 2012, 11:55 AM
fathergoat is offline
Find More Posts by fathergoat
How do I land this thing?
fathergoat's Avatar
That should work. you'll want some washers too
Old Nov 27, 2012, 03:23 PM
DRAMJET is offline
Find More Posts by DRAMJET
2 metre rule applies!
DRAMJET's Avatar
App, these look like same but somewhat cheaper, maybe some reselling going on...
http://www.rctimer.com/index.php?gOo...7&productname=
Or 8040s
http://www.rctimer.com/index.php?gOo...9&productname=
Old Nov 27, 2012, 05:40 PM
Banjofrog is offline
Find More Posts by Banjofrog
Geez That's A Big Fly
Banjofrog's Avatar
That prop looks exactly like the TGS Sport prop sold by HobbyKing........
Old Nov 27, 2012, 10:52 PM
Apphoard is offline
Find More Posts by Apphoard
Registered User
Apphoard's Avatar
Thanks Dramjet I ordered the 8x6's seemed like a good deal.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
New Product FMS F4U Corsair 1400mm EPO Warbird jbc Electric Warbirds 9246 Dec 09, 2016 02:18 AM
Question ME-109, Spitfire, F4U Corsair, F4U Corsair, or P-51D Mustang, best flyer??? zippiz GWS (Grand Wing Servo) 89 Oct 03, 2015 05:58 PM
Sold NitroPlanes Airfield RC/FMS 800mm Corsair Reciever Ready $80.00 Shipped Mikey 68 Aircraft - Electric - Airplanes (FS/W) 6 Aug 14, 2010 04:18 PM
Sold NitroPlanes Airfield RC/FMS 800mm Corsair Reciever Ready $100.00 Shipped Mikey 68 Aircraft - Electric - Airplanes (FS/W) 1 Aug 09, 2010 12:40 PM
Discussion New ParkZone F4U Corsair for FMS/CV ggunners Simulators 5 Oct 16, 2008 11:42 AM