Thread Tools
Old Sep 04, 2010, 05:23 PM
Howemd is offline
Find More Posts by Howemd
Registered User
Howemd's Avatar
Discussion

Gaui Hurrican 550 (CFS) or EXI 500 for my next heli?


I have gotten comfortable hovering my EXI 450 in all aspects and am just now starting FFF and figure 8's. As I get more comfortable flying, I want to start building another heli.

Allerc has a sale going right now on a Gaui Hurricane 550 CFS (Carbon Side Frames)for $200. I have read good things about Gaui, they just don’t seem to be near as popular as EXI or HK heli's.

I have a new Spartan Quark Gyro I picked up at a good price waiting for it and plan to put good gear in either one I get.

Is the Gaui 550 CFS sale price worth it? Would y'all say the Gaui 550 is better than the EXI 500?

Thanks in advance
Dave H.
Last edited by Howemd; Sep 04, 2010 at 06:03 PM. Reason: spelling :(
Sign up now
to remove ads between posts
Old Sep 04, 2010, 09:04 PM
Druss is offline
Find More Posts by Druss
Registered User
I personally prefer Gaui to EXI, the only advantage EXI might have is that it's probably compatible with the Trex500 so parts support might be easier.

The Gaui is going to be slightly larger and therefore more stable.
Old Sep 07, 2010, 10:36 AM
skizziks is offline
Find More Posts by skizziks
Registered User
The EXI500 and the HK500 are clones and you will have to replace a lot of parts to get anywhere close to the Align Trex 500....The Gaui Hurricane 500 is an original design by Gaui and is not a clone and you can get parts at Helidirect or Empire hobbies.....The Gaui 500 is much more easier to build than the EXI or the HK 500....The base kit for the Gaui is $80 for the 425 and the extension kit to upgrade to the 550 is under $40 so you can save money and extend to a 550 later if you want..
Old Sep 08, 2010, 01:24 AM
GhostFlyer1 is offline
Find More Posts by GhostFlyer1
Umm what just flew off my ship
GhostFlyer1's Avatar
I did the 425 to 550 conversion and the upgrade only ran about 20 bucks. before main blades. I like the gaui mine is very stable compaired to my 450.
Old Sep 08, 2010, 10:41 AM
Melnic is offline
Find More Posts by Melnic
Team Wack-a-Mole
Melnic's Avatar
Electronics and battery will cost you more for the 550. But the 550 is going to fly better
Last edited by Melnic; Sep 29, 2011 at 11:01 AM.
Old Sep 08, 2010, 09:51 PM
GhostFlyer1 is offline
Find More Posts by GhostFlyer1
Umm what just flew off my ship
GhostFlyer1's Avatar
Quote:
Originally Posted by Melnic View Post
Electronics and battery will cost you more for the 550. But the 550 is going to fly better.
That all depends on how you shop. I put DS821s on the cyclic I budget shopped and beatup the LHS guy for those LOL, a jr770 used *Thanks JustPlainChris* and a 9257 on the tail which for now is sufficient for my type of flying. I can not 3d at this point as im still new but yes it is very stable. All in all it was not to terribly pricey. Might be a different story if you were a hard core 3D'r

Ghost
Old Sep 08, 2010, 10:22 PM
Howemd is offline
Find More Posts by Howemd
Registered User
Howemd's Avatar
I decided to purchase the 550 CFS from Allerc.com. While it is in transit I am reading and watching the build videos on HeliFreak while trying to decide how to outfit it. I have read about some of the common/recommend upgrades:
CNC elevator
CNC pitch/roll arms
CNC head stop
CNC swash plate guide
Trex 600 landing gear and tail fin
Raptor 30 ball links
Head Hunter Heli big bearing upgrade?

Before I purchase these items I am waiting for my kit to arrive in hopes to make 1 or 2 big orders. My current plan is to use a Z20 980kv motor (basic sport flying), 550 blades, 15/50/20/61 gears, (if I remember correctly), and a new Quark gyro I have.

Two immediate questions I have are what servos do y'all recommend (using a Spektrum receiver), and do the Carbon Fiber Offset Servo Arms help set up the servo geometry?

Thanks in advance!
Dave H.
Old Sep 08, 2010, 10:38 PM
Druss is offline
Find More Posts by Druss
Registered User
Personally, I'd suggest you fly it stock before doing any upgrades. Most of the guys upgrading either do so because they can afford it (not saying you can't) or because they notice a performance difference. As this sounds like your second kit heli and since you are only sport flying, I don't think you'll notice much, if any, difference.
Old Sep 09, 2010, 12:44 PM
GhostFlyer1 is offline
Find More Posts by GhostFlyer1
Umm what just flew off my ship
GhostFlyer1's Avatar
I have raptor gear on mine. The holes matched up for mounting and they are a little stronger and wider which gives it a bit more of a presence
Druss is right I would fly it first before going through all the upgrades and the Z20 980Kv is the same motor im using with power to spare it seems.
Old Oct 16, 2010, 12:59 AM
kctrading is offline
Find More Posts by kctrading
Registered User
kctrading's Avatar
Awesome Heli!

2 1/2 months later and flight 57...

Gaui Hurricane 550 Flight 57 with HobbyKing Hat Camcorder (8 min 11 sec)


I have a CF 425 but I need to finish it...Got this one in a trade...going to turn it into a 550 as well with long boom


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Wanted: Gaui 550/425 or? Cash/Partial Trade for my Gaui 200 V2 ATF? kctrading Aircraft - Electric - Helis (FS/W) 2 Aug 15, 2010 12:09 PM
Wanted Wanted: Gaui 550/425 or? Trade for my Gaui 200 V2 Hot Rod kctrading Aircraft - Electric - Helis (FS/W) 0 Jun 29, 2010 09:05 PM
For Sale Gaui hurricane 550 cfs (carbon side frames) version TurboFanElectric Aircraft - Electric - Helis (FS/W) 0 Jan 18, 2010 09:27 AM
Sold RJX Xtreme X90.. F/S or F/T... Looking for a 500,550 or maybe a 250 size heli. Tradhunt Aircraft - Fuel - Helis (FS/W) 4 Sep 25, 2009 12:59 AM
Sold RJX Xtreme X90.. F/S or F/T... Looking for a 500,550 or maybe a 250 size heli. Tradhunt Aircraft - Electric - Helis (FS/W) 1 Sep 15, 2009 08:32 PM