New Products Flash Sale
Thread Tools
Oct 18, 2010, 06:49 AM
"Aircraftus Fragmentum"
kydawg1's Avatar
Quote:
Originally Posted by Nitrouss View Post
I charged the battery yesterday, and only 1500 mah was used on the maiden flight, which surprised me a bit. That means that i can fly maybe as long as 15 min pr. charge Seems like this is a very efficient setup, yet not very powerful...
That is great how efficient it flies, along with your video....it makes me want one even more. Very Nice.
Sign up now
to remove ads between posts
Oct 18, 2010, 09:04 PM
Registered User
For all of you still looking for this GIANT, I found it on HobbyKing.com here is a link to the page. enjoy!

http://www.hobbyking.com/hobbyking/s...13846&aff=5361
Oct 18, 2010, 09:07 PM
Lookout For The!Radio Silence.
wingspan100's Avatar
Quote:
Originally Posted by blackcat13 View Post
For all of you still looking for this GIANT, I found it on HobbyKing.com here is a link to the page. enjoy!

http://www.hobbyking.com/hobbyking/s...13846&aff=5361
This was mentioned in the shipping:
Special shipping considerations;
-Sorry, we cannot ship this item to USA. It is too large.
-This parcel MUST be shipped via EMS Express to all other countries.
Oct 19, 2010, 12:00 AM
Lookout For The!Radio Silence.
wingspan100's Avatar
I can bring these into the USA if anyone is interested.
To save any money on shipping, I would have to make
a group order of at least 5 pieces. Who's in??
The price would be $239 PNP + $65 shipping.
It will get cheaper if we group order 10 pieces.
PM me to get your name on the list.
You will not need to pay until the list is complete.
I will accept Paypal or credit card by phone order.
Oct 19, 2010, 02:12 AM
GorillaGlue, Tape...I'm good
Quote:
Originally Posted by wingspan100 View Post
I can bring these into the USA if anyone is interested.
To save any money on shipping, I would have to make
a group order of at least 5 pieces. Who's in??
The price would be $239 PNP + $65 shipping.
It will get cheaper if we group order 10 pieces.
PM me to get your name on the list.
You will not need to pay until the list is complete.
I will accept Paypal or credit card by phone order.
Which version, the RED or the BLUE (a la PW-RC)? Or maybe something else?
Oct 19, 2010, 09:26 AM
Lookout For The!Radio Silence.
wingspan100's Avatar
Right now it would be the red version for sure.
I will see if the blue decals sheets are also available.
Oct 19, 2010, 10:39 AM
One cell short of a Pack
steve1814's Avatar
Quote:
Originally Posted by wingspan100 View Post
Right now it would be the red version for sure.
I will see if the blue decals sheets are also available.
The Blue one has a painted nose and tail along with the decals...I just got mine from PW-RC. Funny thing, the decals have an "off white" color to them, will have to cut that portion out to have it look correct.

Cheers,
Steve
Oct 19, 2010, 04:54 PM
Registered User
Quote:
Originally Posted by wingspan100 View Post
I can bring these into the USA if anyone is interested.
To save any money on shipping, I would have to make
a group order of at least 5 pieces. Who's in??
The price would be $239 PNP + $65 shipping.
It will get cheaper if we group order 10 pieces.
PM me to get your name on the list.
You will not need to pay until the list is complete.
I will accept Paypal or credit card by phone order.
What about if we pay you and you dissapear
Oct 20, 2010, 12:41 AM
Lookout For The!Radio Silence.
wingspan100's Avatar
Quote:
Originally Posted by RcNewbAddict View Post
What about if we pay you and you dissapear
I would invite you to visit our website:
www.airshowrc.com
We are not going to disappear.
I like these airplanes and thought I could help.
I am in contact with the factory right now.
Oct 20, 2010, 12:46 AM
Lookout For The!Radio Silence.
wingspan100's Avatar
Here is one of my other threads:
Hobby Top Gun L-39
https://www.rcgroups.com/forums/show....php?t=1228513
Everyone has got their planes.
Oct 20, 2010, 07:09 AM
"Aircraftus Fragmentum"
kydawg1's Avatar
......I Love the one with floats from PW-RC.........Philip is GREAT to deal with.
Last edited by kydawg1; Oct 20, 2010 at 07:19 AM.
Oct 20, 2010, 12:01 PM
GorillaGlue, Tape...I'm good
Quote:
Originally Posted by steve1814 View Post
The Blue one has a painted nose and tail along with the decals...I just got mine from PW-RC. Funny thing, the decals have an "off white" color to them, will have to cut that portion out to have it look correct.

Cheers,
Steve
Please give us a little tour of this plane. I'd like to know what the differences are. Pictures would be nice.
Oct 26, 2010, 06:16 AM
Build 2 Bounce!
I bought one of these just over a week ago from ElectricWingman in the UK : http://www.electricwingman.com/other-rc-planes.aspx

I bought the ARTF as I don't have much time for building these days. I was a bit wary of how good the electronics would be considering the price, but I was pleasantly surprised. The servos are very fast and the centering isn't bad at all. There are pre-installed y-leads in the fus for the flap and aileron servos, meaning that in theory you could use a 5ch Rx.

The motor/esc/bec are all unbranded like the servos, but the installation done at the factory is quite neat. I haven't flown the model yet but it seems to have plenty of power from the static tests i've done using a 4S lipo.

The quality of the foam moulding is awsome, better than some of the MPX kits i've seen, and very few 'pimples' that I normally expect to find hundreds of on moulded foam kits.

I did a few modifications to mine as I assembled it which extended the build time, but I think you could probably get one of these flying with a couple of evenings work. It seemed to take me longer to apply all the decals than to actually build the model!

The mod's I did were as follows :

1) Carved out the spats so that I could use 70mm diameter wheels.
2) Replaced the M3 nuts and bolts for the wheel axles with M4 equivalents
3) Removed some of the plastic from the top of the tube in the fus (which routes the flap/aileron y-leads) and cut some of the surrounding foam away so that it's easier to tuck the servo wires in when attaching the wing.
4) Added a couple of locking collars to the nose wheel pivot point so that the steering arm had better alignment with the pushrod (tip from bungymania).
5) Enlarged the holes in the washers that are glued to the underside of the wing by 2mm, this makes locating the blind-nuts in the fus with the wing bolts really easy.

I can't wait to fly this model and see what the stock setup is capable of as it looks really promising. As soon as the weather permits i'll get some video.

Si.
Oct 27, 2010, 02:59 PM
Registered User
charlatan's Avatar
Nitrouss - Gonna get me the kit from Santa I think. After reading the Bungymania article, think I'm gonna go Turnigy 4250-580 on 5S (already have a few of these packs). I've read a few sites saying you need 4 x 9g servo's, and 2 x 17g servo's. Can you tell me exactly what bits you used, how many extension leads etc...

Thanks
Oct 27, 2010, 03:25 PM
Registered User
Will run nice on 5s too

Here's my setup:

Turnigy AerodriveXp SK Series 42-40 750Kv / 600W (Hobbycity)
Sky-wing 60A ESC w/5A bec (really cheap; $10 + shipping) (Ebay)
Rhino 4s 3700mah 20c (Hobbycity)
Servos: HD-1900A Power HD Micro 1,5kg 9g on flaps (9g works fine on flaps too, at least so far), HXT900 on rudders. (x5. need one extra on elevator with my mod...)
Prop: 12x6, very efficient but not so powerful. 14x7, more power but still 10 min. flytime.

Did u mean servocable extensions?

I used 60cm cables for rudder and elevator. Y-cabel on elevator. Flaps and aileron use 2 channels each and are mixed together on the radio for more precise trimming. Here i used 5, 10 and 15 cm cables to get the correct length without having too much cable inside the fuse. These cables cost only a cpl of dollars for a 10 pack from hobbycity...
Last edited by Nitrouss; Oct 27, 2010 at 03:53 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Question Cessna 182 (980 mm, EPO) Art-Tech karosi Beginner Training Area (Aircraft-Electric) 3 Apr 27, 2010 03:38 PM
Discussion Bae Hawk Red Arrow,Flying Illusion by Tian Sheng 990mm hypstar Foamy EDFs 1 Feb 14, 2010 09:49 PM
Discussion 5ch EPO Cessna 182 with flaps RxR, incredible price BaracW Hot Online Deals 8 Feb 23, 2009 11:29 PM
Discussion Hobbycity's New Cessna 182 RTF 5Ch with Lighting & Flaps EPO anthodenn Parkflyers 1 Oct 22, 2008 03:09 PM