Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jan 19, 2012, 08:44 PM
RealGambler is offline
Find More Posts by RealGambler
Way to many airplanes!
Thank you all for telling me about not using expo! Right now, flying sessions are only about once a week because of the high winds, so now I have one less thing to experiment with (or worry about): expo! I trust you fully, so I won't have to spend my precious little flying time experimenting with expo "just in case"...

Looking forward for my next flying session with 0 expo! Windfinder is optimistic, so maybe this weekend! Yeah!

Edit: Just saw Turnerm comment.... NOOOOOO I don't want to experiment with negative expo! I'll leave that to you guys!
Sign up now
to remove ads between posts
Old Jan 19, 2012, 08:46 PM
turboparker is offline
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by turnerm View Post
I wonder what negative expo would to the 3D Beast?
On my Futaba, negative expo makes the plane mellower around center-stick. (We Futaba & HiTec pilots have that opposite expo thing going, ya know....)

In your case, it would make the plane more sensitive around center. It may be possible to dial-out the programmed-in expo - provided that the curves are similar.

BTW - I'll be flying my first quad tomorrow! Picking up an mQX at my LHS after work!

Joel
Old Jan 19, 2012, 08:56 PM
ICU is offline
ICU
Find More Posts by ICU
ICU
Check out my Shapeways Shop
ICU's Avatar
NwRcFlight,

My maiden and 2nd flight were with the E-flight 2s 180. But the following flights were with some home-rolled Hyp 240's. I did immediately notice the power difference with the Hyp's, I might of had some pullout power in the first minute or two but didn't try any hovers at that time. I was having too much fun doing easy peasy field long KE passes.

The power was nothing like the V1 Beast w/5043 and Hyp 2s 240's. With that combo I had unlimited vertical all the way up to my 7 min timer. I usually just keep the E-flight batteries as spares, but rarely fly them in the Beast or Sbach.

I know the B3D is a little heavier than the V1, but it felt like I had a lot more power with the V1 motor. I'm going to swap it out and see how it goes Sat.
Old Jan 19, 2012, 09:33 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by turboparker View Post
.

BTW - I'll be flying my first quad tomorrow! Picking up an mQX at my LHS after work!

Joel
That thing intrigues me. Looks like a flying crab!! Let me know what you think once you fly it!
Old Jan 19, 2012, 11:04 PM
Vegas_flyer is offline
Find More Posts by Vegas_flyer
Registered User
Vegas_flyer's Avatar
asdf
fdsa
Last edited by Vegas_flyer; Jan 20, 2012 at 03:51 PM.
Old Jan 20, 2012, 03:56 AM
NwRcFlight is offline
Find More Posts by NwRcFlight
EDF Junkie
Quote:
Originally Posted by ICU View Post
NwRcFlight,

My maiden and 2nd flight were with the E-flight 2s 180. But the following flights were with some home-rolled Hyp 240's. I did immediately notice the power difference with the Hyp's, I might of had some pullout power in the first minute or two but didn't try any hovers at that time. I was having too much fun doing easy peasy field long KE passes.

The power was nothing like the V1 Beast w/5043 and Hyp 2s 240's. With that combo I had unlimited vertical all the way up to my 7 min timer. I usually just keep the E-flight batteries as spares, but rarely fly them in the Beast or Sbach.

I know the B3D is a little heavier than the V1, but it felt like I had a lot more power with the V1 motor. I'm going to swap it out and see how it goes Sat.
Great. Just thought I'd share what happened to me. My Eflite 180's work great in the V1 Beast but won't power the V2 Beast I had. I just got 7 Hyperion packs but now have no Beast 3D! I'm thinking I'll just stick with the V1 Beast and fly it with the Hyperions. I want that Mig instead of another Beast!
Old Jan 20, 2012, 07:36 AM
humveeflyer is offline
Find More Posts by humveeflyer
heli addict
humveeflyer's Avatar
Quote:
Originally Posted by turboparker View Post
BTW - I'll be flying my first quad tomorrow! Picking up an mQX at my LHS after work!

Joel
I think that you will like it. Kind of like a cross between a heli and a plane. It's very fun!
Old Jan 20, 2012, 07:53 AM
d2tw4all is offline
Find More Posts by d2tw4all
Registered User
Quote:
Originally Posted by binaryclock View Post
Actually it's really not too hard to cut your own custom PCB with a bit of knowledge on the process. Sure, it takes some tools and know how, but as long as you get someone to design the schematics on Eagle or something and you can print it out on a transparency, then the rest is rather simple.
I self taught myself Eagle PCB a while back, a board layout like this would be absolutely trivial to layout.

Tom
Old Jan 20, 2012, 07:55 AM
d2tw4all is offline
Find More Posts by d2tw4all
Registered User
Quote:
Originally Posted by RealGambler View Post
PCBs like the one I've shown above can be made with tape, and a plastic pan, in your house!! Ask how I know!
You don't even need tape, a sharpie will do.
Old Jan 20, 2012, 09:44 AM
gatorb8 is online now
Find More Posts by gatorb8
Outlaw
gatorb8's Avatar
oops! posted in wrong thread before coffee kicked in!
sorry!
Last edited by gatorb8; Jan 20, 2012 at 10:04 AM.
Old Jan 20, 2012, 10:01 AM
pugsam is online now
Find More Posts by pugsam
LiPo-Sucker & Airframe EMT
pugsam's Avatar
[deleted]
Last edited by pugsam; Jan 20, 2012 at 10:10 AM.
Old Jan 20, 2012, 10:52 AM
binaryclock is offline
Find More Posts by binaryclock
I hate winter!
binaryclock's Avatar
Lol the above two posts were pre-coffee posts.
Old Jan 20, 2012, 12:41 PM
pugsam is online now
Find More Posts by pugsam
LiPo-Sucker & Airframe EMT
pugsam's Avatar
Quote:
Originally Posted by binaryclock View Post
Lol the above two posts were pre-coffee posts.
Mine was Postus-Interruptus!!!

I'd shared brilliant, insightful and incredibly humorous information in response to gator's post.

But then -- he withdrew his post!

That left my totally awesome stuff hanging out there in the breeze, like a GeeBee flying over a rooftop after LVC, without any predicate or raison d'etre.

Maybe someday I'll try sharing it again.....

So there.........

Old Jan 20, 2012, 03:37 PM
Ikankrachuhmoll is offline
Find More Posts by Ikankrachuhmoll
Registered User
Quote:
Originally Posted by ICU View Post
NwRcFlight,

My maiden and 2nd flight were with the E-flight 2s 180. But the following flights were with some home-rolled Hyp 240's. I did immediately notice the power difference with the Hyp's, I might of had some pullout power in the first minute or two but didn't try any hovers at that time. I was having too much fun doing easy peasy field long KE passes.

The power was nothing like the V1 Beast w/5043 and Hyp 2s 240's. With that combo I had unlimited vertical all the way up to my 7 min timer. I usually just keep the E-flight batteries as spares, but rarely fly them in the Beast or Sbach.

I know the B3D is a little heavier than the V1, but it felt like I had a lot more power with the V1 motor. I'm going to swap it out and see how it goes Sat.
I have never flown a V1 but me and V2 got a lot more comfortable with each other today. Forth or fifth flight and the pucker factor has been reduced quite a bit.

But not completely,,, I was flying inverted and, for some reason, got skeered, went hard down but didn't think to raise the throttle. It pointed straight up but began falling nearly straight down. It didn't fall far 'til I hit the throttle and it shot up pretty impressively, IM(somewhat inexperienced)O. This was with a pair or 1S Hyperion 240s and a series adapter.

Learned three things so far:
1 - 70% rates is too low
2 - It seems that hard throttle will get you our of trouble better throttling down. However, I can also see that if it can't be saved, this method could make the damage much worse.
3 - Zero throttle landings are not smooth. Probably the same on the T-28 but I always belly land it.

Fun plane, I just gotta get used to the fact that it seems to do things just before I have completely made the decision to do them. It also uses up airspace in a hurry!!
Old Jan 20, 2012, 04:27 PM
turboparker is offline
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by turnerm View Post
That thing intrigues me. Looks like a flying crab!! Let me know what you think once you fly it!
Turnerm,

I love this little quad! Reasonably fast, very maneuverable, yet nearly as stable as a coaxial heli. See my maiden & mini-review here: https://www.rcgroups.com/forums/show...&postcount=714

Joel


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ParkZone Ultra Micro T-28!!! THE Owners Thread!!!! RM_Sparks Micro Ready-to-Fly 10772 Nov 30, 2016 12:36 PM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 05:51 PM
Discussion UM beast, Now your talking qman Micro Ready-to-Fly 102 Dec 22, 2010 11:39 AM
Discussion The first OFFICIAL Parkzone Sukhoi SU-26XP BNF by ParkZone Owners thread skyjet Micro Ready-to-Fly 2 Mar 19, 2010 04:00 PM
Official Parkzone P-51 Owners Thread monitor Parkflyers 913 Oct 04, 2005 10:02 PM