Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 30, 2011, 01:53 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Off topic... sorry - this thread has kinda become my catch-all thread!

I just realized that this is a big week for me. I'm getting my new Carbon Z Yak, some repaired Babbel Batts, my replacement Sbach from HH, and the new Madden 12 Xbox 360 game all delivered to my house in one week! Yahoo!

I'm not gonna know what to play with first!!
Sign up now
to remove ads between posts
Old Aug 30, 2011, 01:58 PM
RTF Thumper is offline
Find More Posts by RTF Thumper
Big Jim
RTF Thumper's Avatar
Madien went well. Then I managed two crashes resulting in a broken prop and spinner came off. The worst crash was caused by low light and lost orentIon good news have a great vid and the repairs have been made. Total of twelve rog and landings two were not good. Great plane but what a handful you have to fly every second, hope this gets easier. Lots of fun and right now a little stressful.
Old Aug 30, 2011, 02:07 PM
binaryclock is offline
Find More Posts by binaryclock
I hate winter!
binaryclock's Avatar
Quote:
Originally Posted by RTF Thumper View Post
Madien went well. Then I managed two crashes resulting in a broken prop and spinner came off. The worst crash was caused by low light and lost orentIon good news have a great vid and the repairs have been made. Total of twelve rog and landings two were not good. Great plane but what a handful you have to fly every second, hope this gets easier. Lots of fun and right now a little stressful.
Awesome Thumper! Yeah there are two things you need to have extras of when flying the Beast:

1. Props
2. Prop Adapters

If you don't have one in your stock left, buy some for when you eventually break them

Low light/orientation is tough to get used to on the beast. Low light is never a good thing, but orientation gets easier. Just like the UM T-28, you will be able to know where the beast will be heading if you hold a certain turn so you'll have to use your eyes less and your fingers/brain more.

Sounds like a good maiden. no major damage!

It does get easier, but it's not as quick to get a handle on as the UM T-28. Like I said before, it took me like 30 flights to get it to the point where I fly the plane instead of the plane flying me. Then it took me 100 flights to get to the point where I got comfortable with high up maneuvers and the speed/flight characteristics.. Took 120+ flights to get graceful, calm and close to the ground at low speeds instead of high up at WOT. I'm almost at the point where I feel as comfortable with the Beast as I did a month ago with the UM T-28. Almost... but still not there. I still cringe when I try inverted at under 10 feet and I still won't try KE under 20 feet, but I'm bringing it lower each day with more confidence.

I actually came out of a Split-S inverted a few times this a.m. and I was 6 inches to a foot off the ground for at least 20 feet. I didn't try to get it that low, I tried to level off at 5 feet but it sank a bit more because I didn't increase the throttle enough. It was awesome, too bad my #11 ran out of batteries. Didn't sink it
Last edited by binaryclock; Aug 30, 2011 at 02:15 PM.
Old Aug 30, 2011, 02:45 PM
erkq is online now
Find More Posts by erkq
Registered User
Quote:
Originally Posted by RTF Thumper View Post
Great plane but what a handful you have to fly every second, hope this gets easier. Lots of fun and right now a little stressful.
Yes... this is the characteristic a good aerobat must have. They go where you point them until you point them somewhere else. Self-stabilization is not a good thing and fortunately the Beast has none. It is a different style of flying but brings the next level of performance with it.

I had a passing couple ask me to let it fly "hands off" to see how stable it is. I couldn't... just could not make myself let go of the sticks. All my reflexes force me to be in control of the plane at all times. The Sbach is the same way only a little faster.
RCG Plus Member
Old Aug 30, 2011, 02:46 PM
Scott216 is offline
Find More Posts by Scott216
Registered User

Velcro for spare batteries


Quote:
Originally Posted by binaryclock View Post
I always get my Velcro from business depot type stores that sell pens/paper/binders/folders for school and businesses. They usually have Velcro on an aisle that has all the fastening stuff like thumb tacks, glue, etc.

I purchase it in a roll then just use a hobby knife or scissors to cut a strip that I require.

I'd be willing to wager that Walmart even carries Velcro in a roll that you can cut in to pieces.
The velcro I've seen at the hardware stores and places like Walmart have bigger hooks and loops than the UM batteries and it doesn't work very well with the smaller velcro. It looks like the links posted to Hobby King and Horizon might do the trick.

My beast come with 3 extra velcro dots to be used for extra batteries - I used these up. I was hoping this little pack of velcro was available as a spare part I could purchase.
Old Aug 30, 2011, 02:54 PM
flitelab is offline
Find More Posts by flitelab
flitelab's Avatar
Quote:
Originally Posted by Scott216 View Post
The velcro I've seen at the hardware stores and places like Walmart have bigger hooks and loops than the UM batteries and it doesn't work very well with the smaller velcro. It looks like the links posted to Hobby King and Horizon might do the trick.

My beast come with 3 extra velcro dots to be used for extra batteries - I used these up. I was hoping this little pack of velcro was available as a spare part I could purchase.
http://www.velcro.ca/consumer/all-products

VELCRO® Brand ONE-WRAP® or VELCRO® Brand Reusable Ties or similar is what I use. It is similar to the stock velcro, ie the smaller hooks and loops. I attach it with double sided tape.
Site Sponsor
Old Aug 30, 2011, 03:03 PM
WSEN is offline
Find More Posts by WSEN
Registered User
Quote:
Originally Posted by RTF Thumper View Post
Madien went well. Then I managed two crashes resulting in a broken prop and spinner came off. The worst crash was caused by low light and lost orentIon good news have a great vid and the repairs have been made. Total of twelve rog and landings two were not good. Great plane but what a handful you have to fly every second, hope this gets easier. Lots of fun and right now a little stressful.
Congratulations Thumper! I find landings to be the most challenging. Just now getting to where I can land on a 10/12 tarp about 30% of the time. Ha.
Old Aug 30, 2011, 05:11 PM
eschult is offline
Find More Posts by eschult
FLYINGJUNKY
eschult's Avatar
Quote:
Originally Posted by maukabud View Post
Huh...FYI Wholesale Trains is now listing the Beast @ $85.99...a mere $1 over their big "blowout" price:


http://www.wholesaletrains.com/Detail.asp?ID=200846855
Anyone know how there prices are on shipping. I see that they give you free shipping on 150.00 or more but i am not spending that much. Shipping costs are not visable.
Thanks,Eric
Old Aug 30, 2011, 05:19 PM
SBOTI74 is offline
Find More Posts by SBOTI74
I fly em', there for I am.
SBOTI74's Avatar
Off topic, I know but I need some help and I hope some of you bigger plane fliers can help me a bit. My Stryker and Beast have got me back into bigger planes and I'm working on a Extreme Flight Extra 300 58" Brushless. I'm having a problem with my ESC and JR 921. Hope someone can check out my thread and give me some tips.

Thanks

https://www.rcgroups.com/forums/show....php?t=1497741
Last edited by SBOTI74; Aug 30, 2011 at 05:38 PM.
Old Aug 30, 2011, 05:28 PM
turnerm is offline
Find More Posts by turnerm
Gone Huckin'
turnerm's Avatar
Quote:
Originally Posted by SBOTI74 View Post
Off topic, I know but I need some help and I hope some of you bigger plane fliers can help me a bit. My Stryker and Beast have got me back into bigger planes and I'm working on a Extreme Flight Extra 300 58" Brushless. I'm having a problem with my ESC and JR 921. Hope someone can check out my thread and give me some tips.

Thanks

https://www.rcgroups.com/forums/showt...1#post19185234
I can't seem to get the link to work - can you try posting it again?
Old Aug 30, 2011, 05:37 PM
tominator06 is offline
Find More Posts by tominator06
Team Hillbilly
tominator06's Avatar
Here it is turnerm https://www.rcgroups.com/forums/show....php?t=1497741
Old Aug 30, 2011, 05:39 PM
bobly is offline
Find More Posts by bobly
Registered User
Quote:
Originally Posted by Scott216 View Post
The velcro I've seen at the hardware stores and places like Walmart have bigger hooks and loops than the UM batteries and it doesn't work very well with the smaller velcro. It looks like the links posted to Hobby King and Horizon might do the trick.

My beast come with 3 extra velcro dots to be used for extra batteries - I used these up. I was hoping this little pack of velcro was available as a spare part I could purchase.
The stuff you get at hardware stores and Walmart actually works though, unlike the stuff they send with the planes. Get a pack for a couple of bucks and then when you get all the chincy stuff that came with the plane replaced, you won't have problems anymore.
Old Aug 30, 2011, 05:39 PM
SBOTI74 is offline
Find More Posts by SBOTI74
I fly em', there for I am.
SBOTI74's Avatar
Quote:
Originally Posted by tominator06 View Post
Thanks Tominator... I fixed the link in my orginal post as well..
Old Aug 30, 2011, 06:01 PM
Aaeolien is offline
Find More Posts by Aaeolien
3d addict
Grats thumper. That's awesome glad it was successful. You'll eventually get comfortable with it and then it becomes even more fun.
Old Aug 30, 2011, 06:12 PM
RTF Thumper is offline
Find More Posts by RTF Thumper
Big Jim
RTF Thumper's Avatar
Quote:
Originally Posted by Aaeolien View Post
Grats thumper. That's awesome glad it was successful. You'll eventually get comfortable with it and then it becomes even more fun.
I will get the Vid up soon, BUUUT I did two alerion rolls and a big smooth loop. But as stated you cant be thinking about anything else. And at 3/4 throttle she was flying me, also got to experiance the low throtel stall with the wing wogel and no control. that was a great heads up from binaryclock just eased in more power and I mean eased in and slipped off the elevator. It was a close call had maybe 10 feet of altitude on a aborted landing.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ParkZone Ultra Micro T-28!!! THE Owners Thread!!!! RM_Sparks Micro Ready-to-Fly 10772 Nov 30, 2016 12:36 PM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 05:51 PM
Discussion UM beast, Now your talking qman Micro Ready-to-Fly 102 Dec 22, 2010 11:39 AM
Discussion The first OFFICIAL Parkzone Sukhoi SU-26XP BNF by ParkZone Owners thread skyjet Micro Ready-to-Fly 2 Mar 19, 2010 04:00 PM
Official Parkzone P-51 Owners Thread monitor Parkflyers 913 Oct 04, 2005 10:02 PM