Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Feb 07, 2013, 10:38 PM
ChinoDiablo is offline
Find More Posts by ChinoDiablo
Chef Pilot: Planes vs Butter
ChinoDiablo's Avatar
Thanks all for the suggestions.
Not sure what I'll do... too depressed. Just discovered that we have termites in our house.
Not good.
Gonna cost $$$$.
Replacement of the Beast has just become low priority.
RCG Plus Member
Latest blog entry: Pizza!
Sign up now
to remove ads between posts
Old Feb 07, 2013, 11:24 PM
kalmon is offline
Find More Posts by kalmon
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by turboparker View Post
Oh, yeah! C'mon in! The water's fine!

I have hundreds of 3s flights on my Beast 3D and I only flew my Sbach 3s on 2s for the maiden. Both with stock bricks. Never had an issue, except for the time when I induced OTP on purpose in the B3D on a 105 F day by doing repeated 300' vertical climbs @ WOT. Got my first taste of what it's like to deadstick a concrete block. From around 100' AGL, I barely made it back to the runway, just 75' away!

Joel
Thank god for that 10kt tailwind.

------
ChinoDiablo - That sucks I hope it gets resolved. An uncle of mine got that bad news about a decade ago. Get quotes and opinions from multiple people. And if possible talk to your insurance company.

-Brian
Old Feb 08, 2013, 01:33 AM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
My eBay beast arrived today!!!
The wings are shot, and it's got quite a bit of love bites but all the electrics and as3x work. Gonna try to make it out to lhs tomorrow for beastie bits shopping
RCG Plus Member
Old Feb 08, 2013, 03:13 PM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Does anyone have a link to a video or a post of instructions on how to best change the Beast 3d's wings out?
RCG Plus Member
Old Feb 08, 2013, 11:34 PM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Bueller? Bueller?
RCG Plus Member
Old Feb 08, 2013, 11:38 PM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Quote:
Originally Posted by airpower View Post
Where do you guys buy gws 5030 props? All I find are either orange or three blade.
Previously I had posted gravesrc.com has the gws 5030 in stock, and I was there tonight. They have probably 100 black ones, $1.10 ea
RCG Plus Member
Old Feb 09, 2013, 08:26 AM
kalmon is offline
Find More Posts by kalmon
Parkzone junkie
kalmon's Avatar
Quote:
Originally Posted by bhoov128 View Post
Does anyone have a link to a video or a post of instructions on how to best change the Beast 3d's wings out?
I've not seen one. It is not hard to do, however with all the wires it is tedious. Just take your time and make sure everything lines up right.

-Brian
Old Feb 09, 2013, 08:31 AM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Quote:
Originally Posted by kalmon View Post
I've not seen one. It is not hard to do, however with all the wires it is tedious. Just take your time and make sure everything lines up right.

-Brian
I took ten or so pictures last night of all the attachment points. I've got new carbon rods, and a new wing set which includes interplane struts and guy wires. Can't wait! Also I unwarped the elevator by placing a small weight on one side of the elevator and leaving it directly under a lamp , I have one of those extendable lamps on an arm like the one from the Pixar animation and it gets super hot. After an hour and a half I took it out from under and removed the weight and the foam was pretty warm and the warp was gone
RCG Plus Member
Old Feb 09, 2013, 01:21 PM
edge_pilot is offline
Find More Posts by edge_pilot
From a Different Planet!
edge_pilot's Avatar
Figured I would post pictures of my Beast with an atitude adjustment.

V1 Beast with a fan/motor combo out of a UMX Mig. I just added a 6amp ESC and tied it into the gear channel, then mixed it with throttle. I did put it on a switch as well so I can run the prop alone or prop and fan as one.
RCG Plus Member
Last edited by edge_pilot; Dec 25, 2013 at 06:46 PM.
Old Feb 09, 2013, 01:45 PM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Quote:
Originally Posted by edge_pilot View Post
Figured I would post pictures of my Beast with an atitude adjustment.

V1 Beast with a fan/motor combo out of a UMX Mig. I just added a 6amp ESC and tied it into the gear channel, then mixed it with throttle. I did put it on a switch as well so I can run the prop alone or prop and fan as one.
This. Is. Sparta!
RCG Plus Member
Old Feb 09, 2013, 02:40 PM
turboparker is online now
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Now, there's something you don't see every day. Very cool! We need video!!

BTW, did you get your inspiration from the late, great Jimmy Franklin & his Waco? I watched his act in person a few times. I also had the pleasure of watching him practice it at a local airshow before he made it famous at Oshkosh.

Jimmy Franklin's Jet Powered Waco Worlds Best Aerobatic Demo (9 min 26 sec)


Joel
Old Feb 09, 2013, 02:51 PM
edge_pilot is offline
Find More Posts by edge_pilot
From a Different Planet!
edge_pilot's Avatar
Quote:
Originally Posted by turboparker View Post
Now, there's something you don't see every day. Very cool! We need video!!

BTW, did you get your inspiration from the late, great Jimmy Franklin & his Waco? I watched his act in person a few times. I also had the pleasure of watching him practice it at a local airshow before he made it famous at Oshkosh.

http://www.youtube.com/watch?v=lyXzy8AzOxo

Joel
Most definatey. He was just part of my all time hero team....................Masters of Disaster. The real men of aviation, Jimmy Franklin and Jim Leroy, Legends forever!!!!!!!!!!!!!!!!!!
RCG Plus Member
Old Feb 09, 2013, 04:25 PM
turboparker is online now
Find More Posts by turboparker
I'd rather be flying!
turboparker's Avatar
Quote:
Originally Posted by edge_pilot View Post
Most definatey. He was just part of my all time hero team....................Masters of Disaster. The real men of aviation, Jimmy Franklin and Jim Leroy, Legends forever!!!!!!!!!!!!!!!!!!
Most definitely three of the best pilots to ever climb into a cockpit! RIP Bobby, Jimmy, Jim, and Amanda....

How does it fly? Will we be seeing some video?

Joel
Old Feb 09, 2013, 04:35 PM
edge_pilot is offline
Find More Posts by edge_pilot
From a Different Planet!
edge_pilot's Avatar
I live in Ohio so the video may take a little while When its warm it 25mph winds and when its calm its 5 degrees. As soon as I get a reasonable day I will take it out and get video. Just by the thrust it has vertical will be endless. This is kinda my test model for whats yet to come.................................
RCG Plus Member
Old Feb 09, 2013, 11:48 PM
bhoov128 is offline
Find More Posts by bhoov128
https://youtu.be/Q06Y9X4_DsI
bhoov128's Avatar
Best prop seems to be 5043?
RCG Plus Member


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ParkZone Ultra Micro T-28!!! THE Owners Thread!!!! RM_Sparks Micro Ready-to-Fly 10772 Nov 30, 2016 12:36 PM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 05:51 PM
Discussion UM beast, Now your talking qman Micro Ready-to-Fly 102 Dec 22, 2010 11:39 AM
Discussion The first OFFICIAL Parkzone Sukhoi SU-26XP BNF by ParkZone Owners thread skyjet Micro Ready-to-Fly 2 Mar 19, 2010 04:00 PM
Official Parkzone P-51 Owners Thread monitor Parkflyers 913 Oct 04, 2005 10:02 PM