New Products Flash Sale
Thread Tools
Old Oct 28, 2010, 12:31 AM
RCBABBEL is offline
Find More Posts by RCBABBEL
**I'm Battman**
RCBABBEL's Avatar
Quote:
Originally Posted by ChuckTseeker View Post
2 3/4" long and 1 1/2" wide 1/2" high

the knob of foam on the hatch is a little fatter so the thickness of the battery you use might be compromised?

but 2 X 160mAh Hyperion fit nicely

the stock batts weigh 9.2g the 2 X 160mAh Hyperion's 9.9g just remember your also have the weight of the Y harness as well

cheers chuck


Chuck,


Appreciate the batt bay stats!

Enjoyed the vid!

Motor WOT was beautiful music!

This Baby Beast is gonna cook!



rc
RCG Plus Member
Sign up now
to remove ads between posts
Old Oct 28, 2010, 01:12 AM
kchen95 is offline
Find More Posts by kchen95
Registered User
For those of you who will be flying this, can you comment on how well it handles the wind - as in does it handle wind any better than other Parkzone UM's like the Mustang? I like these little planes a lot, but it's just annoying to have to either get up really early in the morning, or wait 'til the sun is almost down to fly when the wind is dead calm. I already have a UM Mustang and a regular Trojan, and for my next plane I'm debating whether to go fast or go small - Habu or Beast....

Kevin

Kevin
Old Oct 28, 2010, 01:47 AM
RCBABBEL is offline
Find More Posts by RCBABBEL
**I'm Battman**
RCBABBEL's Avatar
Beast batt bay:
L-2 3/4"
W-1 1/2"
H-1/2"


TP 1S 325 45C w/JST and shrink (12g)
L-43mm 1.69"
W-25mm .98"
H-5mm .20"


Hyp 1S 320 25C Bare cell (8.59g)
L-46.5mm 1.8"
W-23.5mm .92"
H-4.0mm .16"


TP 2S 325 45C w/JST and shrink (21g)
L-43mm 1.69"
W-25mm .98"
H-10mm .39"



Hyp 2s 320 25C w/JST and shrink (23.1g)
L-54mm 2.12"
W-23.5mm .92"
H-9.5mm .37"




That Thunder Power 2S 325mAh 45C pack is looking very tempting indeed!

I think the weight will be fine.
If the cg can be hit...forget about 5 min. flights.





rc
RCG Plus Member
Old Oct 28, 2010, 02:35 AM
Mister Gun is offline
Find More Posts by Mister Gun
Areoplain Chapmion Flire
Mister Gun's Avatar
My DX6i is still to arrive so this thing is just going to sit here, safe and unsmashed for a little bit longer.
Old Oct 28, 2010, 02:46 AM View Post
macculam
A moderator felt this post violated the following rule: Off Topic Advertisement. Show it to me anyway.
Old Oct 28, 2010, 03:39 AM
chancesAU is offline
Find More Posts by chancesAU
Registered User
chancesAU's Avatar
Heres some pics of my Beast, too windy today so im going to install some goodies into it

Got a nice pic of the new speedy too.
Old Oct 28, 2010, 03:57 AM
OzparkPilot is offline
Find More Posts by OzparkPilot
Watts up ?
OzparkPilot's Avatar
Bought one and think its amazing. Im a futaba guy but do have a DX5 with no expo. Will need new Tx.. Is the DX6i good for all the micros ? Want Expo...
Old Oct 28, 2010, 05:43 AM
doil is offline
Find More Posts by doil
Registered User
Nice video Chuck!

Picked mine up this afternoon.

Nice work Horizon! the airframe looks awesome, very attractive looking aircraft and high quality.

The tailwheel pulling the rudder off on grass landings shouldn't be a problem as the piece of carbon rod down the hinge goes through a small hole in the plastic mount for the tailplane braces.

Havent had a chance to fly it yet, too much wind with a strong easterly sea breeze blowing.

Looking forward to flying this one!
Old Oct 28, 2010, 06:00 AM
ChuckTseeker is offline
Find More Posts by ChuckTseeker
Registered User
ChuckTseeker's Avatar
Looking at the weather map i think most of Australia is in for a wetting and the wind, well maybe next week sometime

Old Oct 28, 2010, 06:39 AM
lazor 22 is offline
Find More Posts by lazor 22
Registered User
lazor 22's Avatar
Maybe that's why they brought it out in Australia first. They knew wind would be bad and were hoping some people would trash there's and buy another.
Old Oct 28, 2010, 06:42 AM
RealGambler is offline
Find More Posts by RealGambler
Way to many airplanes!
Quote:
Originally Posted by BingWing View Post
Bought one and think its amazing. Im a futaba guy but do have a DX5 with no expo. Will need new Tx.. Is the DX6i good for all the micros ? Want Expo...
DX6i will work with all the micros (Parkzone, Eflite). You can store "only" 10 models though (Thanks Chuck, I really though it was only 5)... DX7 will let you store 20 different models, and DX8 illimited (cards). At the rate they are designing those UMs now, and the quality they seem to give (thanks guys for the first reports), maybe a DX6i is not enough anymore!
Last edited by RealGambler; Oct 28, 2010 at 07:56 AM.
Old Oct 28, 2010, 06:44 AM
ChuckTseeker is offline
Find More Posts by ChuckTseeker
Registered User
ChuckTseeker's Avatar
Quote:
Originally Posted by RealGambler View Post
DX6i will work with all the micros (Parkzone, Eflite). You can store "only" 5 models though... DX7 will let you store 20 different models, and DX8 illimited (cards). At the rate they are designing those UMs now, and the quality they seem to give (thanks guys for the first reports), maybe a DX6i is not enough anymore!
10 models
Old Oct 28, 2010, 06:51 AM
RealGambler is offline
Find More Posts by RealGambler
Way to many airplanes!
Quote:
Originally Posted by ChuckTseeker View Post
2 3/4" long X 1 1/2" wide X 1/2" high

the knob of foam on the hatch is a little fatter so the thickness of the battery you use might be compromised?

but 2 X 160mAh Hyperion fit nicely

the stock batts weigh 9.2g the 2 X 160mAh Hyperion's 9.9g just remember your also have the weight of the Y harness as well

cheers chuck
Definitively show that they didn't do such a great job on the velcro though... It's too narrow for two batteries, and way to long for nothing since it's going way up to the front, so a good chunck of that dead weight will not be used. A shorter but wider one would have been the same weight, but give you a better chance to stick two batteries in there... I would say this is the first "mod" I'll do on mine for sure. Last thing you want is an Hyperion flopping around in the nose because it was only stuck partially on that narrow velcro.

Great pictures Chuck (and ChancesAU who even already cut the decals for us!)

Now let's go guys, they most have hangars to store Boeing 747 in Australia too? Find an empty one, grease the security guard, and give us a video in flight!
Old Oct 28, 2010, 07:12 AM
lazor 22 is offline
Find More Posts by lazor 22
Registered User
lazor 22's Avatar
Add your own Velcro?
Old Oct 28, 2010, 07:26 AM
doil is offline
Find More Posts by doil
Registered User
I think the first "mod" I am going to do is to put some tape on the Leading edges of the wings and tail surfaces, just to give a little bit of protection.

The wings do apear to have a very slight airfoil moulded into them, you can see it most when you deflect the ailerons and look at the inside edge.

It definitely has a lot of throw on the tail surfaces too.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion ParkZone Ultra Micro T-28!!! THE Owners Thread!!!! RM_Sparks Micro Ready-to-Fly 10772 Nov 30, 2016 12:36 PM
Official Parkzone P-51 Owners Thread - Part 2 monitor Parkflyers 2602 Jun 15, 2014 05:51 PM
Discussion UM beast, Now your talking qman Micro Ready-to-Fly 102 Dec 22, 2010 11:39 AM
Discussion The first OFFICIAL Parkzone Sukhoi SU-26XP BNF by ParkZone Owners thread skyjet Micro Ready-to-Fly 2 Mar 19, 2010 04:00 PM
Official Parkzone P-51 Owners Thread monitor Parkflyers 913 Oct 04, 2005 10:02 PM