Thread Tools
Jan 03, 2012, 03:37 PM
Registered User
Hello XSSSIVE,

I can have a replacement canopy and landing gear door bays shipped out to you. Regarding the screw, try using upward pressure to take the screw out.

Thank you,
Danny
Sign up now
to remove ads between posts
Jan 03, 2012, 04:39 PM
Registered User
XSSSIVE's Avatar
Quote:
Originally Posted by NitroTechnician
Hello XSSSIVE,

I can have a replacement canopy and landing gear door bays shipped out to you. Regarding the screw, try using upward pressure to take the screw out.

Thank you,
Danny
Danny,

I took your advise on using pressure, it won't come out. It now appears that the nut is spinning. There is no access to the nut. Suggestions? Otherwise, the entire plane may need to be returned for an exchange.

Thanks for the help.
XSSSIVE
Jan 04, 2012, 02:41 PM
Registered User
Hello,

If the nut is spinning, try keeping it from doing so using either upwards pressure, so the nut is kept in place against the foam, or try pressure from an angle to try and keep it in place.

Danny
Jan 09, 2012, 04:27 PM
Registered User
Hello Nitro Planes
I have 5 or 6 planes that I bought from you and everything is fine. I'm in Arkansas and it has never been over a week to get my stuff from you. Abuot 6 months ago I lost the ability to get Nitro on my computer. When I try it always times out before it loads. I still get e-mail from you all the time, but when I try to open it everything is blank. Do you have any idea what the problem is? I can't get graphics on Tower Hobbies anymore eather,just text. Thanks for the help.
Thrushloader
Jan 10, 2012, 09:44 AM
chuck
i received a out of stock notice for 1 of the items on order # yhst-17210252890263-245490.

i replied with a question on my options and have not heard back.

what is the status of the order?

chuck.
Jan 17, 2012, 02:40 PM
Registered User
@Thrusloader
Have you tried updating your browser?


@Chas650r
I see here that you have spoken with a representative and we are doing a partial shipment. If you have any questions regarding your order you can always contact us referencing your order number.

Danny
Jan 22, 2012, 12:25 PM
Registered User
Hi Sam,

Trying to find out where the correct C.G. is on the CMP T-45 with the RC Lander electric retracts installed. Also running 8s lipos in series.

Regards,

Greg
Jan 28, 2012, 03:54 AM
Registered User
I just built my 1400mm Stuka and everything went fine, but when I was mounting the prop blades I could only thread one screw (the inner most) in each blade. The outer hole in each blade doesn't seem to be open all the way through the base of the blade. Is the idea to simple thread the screw through the plastic? Drill it out? Are two screws necessary? It would seem so, but I'm just not sure and would like a little direction before I proceed.

Thanks,
Dave
Feb 04, 2012, 07:52 AM
Registered User
I just received the dynam t-28 with retracts. I have an airtronics rds 8000 tx that uses their fhss-1 receiver. I have not been able to get the retracts to work, have tried many different things. I've seen other posts from folks who also can't get the retracts to work with the airtronics tx/rx system. Are you aware of this problem, and is there any solution to this other than getting a different tx. Thanks--Bo.
Mar 13, 2012, 08:19 PM
Help me pick up the pieces
I love the feature on the new Dynam Peaks where the motor shoots off the plane ripping off the foam with it and sends your plane plummeting to the ground on its 2nd flight because people dont glue things at the factory. Thank you that was an awesome waste of money with an added bonus of no customer support/response
Mar 13, 2012, 08:47 PM
chuck
sad but true.
Mar 13, 2012, 09:59 PM
Registered User
acesimmer's Avatar
One thing I have learned with the asian stuff. No matter what it is always go over everything as quality control sucks. Never trust anything and in many cases replace weak or suspicious parts before flight. I make sure that I cycle the crap out of servos if using the stock stuff. Most times I simply replace them if the model is a nice one.
Mar 21, 2012, 12:46 PM
team sleprock
whiskykid's Avatar
they obviously make more planes then glue!( they would be asia)

ok say ya save 50 cents on glue on a million planes
Apr 06, 2012, 10:51 AM
Registered User
I have 2 Dynam planes from Nitro, the Skybus 58 and the A-10. Both have excellent quality in the airframe although the landing gear on the A-10 leaves a lot to be desired. My Skybus is about a year old and still flying with the original stock setup. Have no idea how many flights, my A-10 only has about 4 flights and have torn the nose gear off a couple of times, this maybe due to tall grass at our field that grabs the wheel at touch down. My only gripe is that every time they are out of stock, they reduce the price, frustrating. Also the lack of spare parts is a pain. I have several Parkzone warbirds and I suspect that the dollars spent on spare parts far outweighs the original price paid for each plane. Someday, Nitro is going to realize what they are missing from the high profit "Cash Cow" provided by the spares.
Apr 06, 2012, 08:16 PM
Registered User
acesimmer's Avatar
Quote:
Originally Posted by unloco2
I have 2 Dynam planes from Nitro, the Skybus 58 and the A-10. Both have excellent quality in the airframe although the landing gear on the A-10 leaves a lot to be desired. My Skybus is about a year old and still flying with the original stock setup. Have no idea how many flights, my A-10 only has about 4 flights and have torn the nose gear off a couple of times, this maybe due to tall grass at our field that grabs the wheel at touch down. My only gripe is that every time they are out of stock, they reduce the price, frustrating. Also the lack of spare parts is a pain. I have several Parkzone warbirds and I suspect that the dollars spent on spare parts far outweighs the original price paid for each plane. Someday, Nitro is going to realize what they are missing from the high profit "Cash Cow" provided by the spares.
Try Phillip at PW-RC... Best prices and service in the world


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Welcome to our official Venom Group International / RC Groups product support forum! Chris Nicastro Venom 84 Feb 06, 2012 11:15 PM
Discussion WELCOME Everyone to the Banana Hobby Support Forum! banana hobby Banana Hobby 3192 Nov 27, 2010 01:33 PM
Sold P-40 Nitroplanes/Airfield 31.5" complete (offers welcome) kstwister Aircraft - Electric - Airplanes (FS/W) 4 May 11, 2010 10:24 PM
Discussion Lousy NitroPlanes Support for bad ESC in Brushless A10 wsame Foamy EDFs 13 Jan 18, 2010 12:54 PM