Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Jan 27, 2011, 07:50 PM
DXStickman is offline
Find More Posts by DXStickman
AMA 42272, from the 1970's
DXStickman's Avatar
Quote:
Originally Posted by Nitro_Nancy View Post
Which spare parts were you looking for? If you give can provide me with the item number i can check in our database for you.
-Nancy
See Posts # 328, & 329
Sign up now
to remove ads between posts
Old Jan 31, 2011, 08:04 PM
Lithonion is offline
Find More Posts by Lithonion
Have you seen my nut?
Lithonion's Avatar

Nitro customer service


I got the motor and esc in today. What are the chances I can get the motor mount and screws back that is on my bad motor I sent you??? Its for the SR Trainer and the RMA # 996797

O
Last edited by Lithonion; Feb 01, 2011 at 01:31 AM.
Old Feb 01, 2011, 02:04 PM
topgun427 is offline
Find More Posts by topgun427
Registered User
lithonion i did the same thing when theesc and motor smoked on my p-51. had to wait to get new ones from them as they threw out the old ones. Wouldn't you think they would
send back what you sent? Hows that new P-51 you ordered?
Old Feb 01, 2011, 02:55 PM
Lithonion is offline
Find More Posts by Lithonion
Have you seen my nut?
Lithonion's Avatar
Quote:
Originally Posted by topgun427 View Post
lithonion i did the same thing when theesc and motor smoked on my p-51. had to wait to get new ones from them as they threw out the old ones. Wouldn't you think they would
send back what you sent? Hows that new P-51 you ordered?
I have not got the P-51 yet. It was suppose to be here yesterday but UPS did not do any residential deliveries due to weather. And today is looking worse then yesterday. I might get it this week if the snow and ice let up.

I am a repair tech for the company I work for, I do on site and depot work. Equipment I work on cost in the range of 500 dollors up to 10k. I never have forgot to send back any part when they send me equipment to diagnose or repair. Even if it is stuff not even related to whats being repaired. Then again you have to be organized and responsible. I ordered the new corsair a few days ago from Nitro, I hope I didn't make a mistake.

Another oddity is how many motors have any of us purchased over the years that come with the mounting hardware. Every motor I have purchased both cheapos and name brand come with the hardware. This dynam motor they sent me was brand new in the factory wrapper. No screws or motor mount.

If they say they have to order the mount, I am going to gut my servos out I put in it and just toss the plane. Its getting above and beyond what its worth to me. And right now its not worth 4 Advil for my headache. Plus this is airplane 22. Its not like I don't have something else to fly this spring.
Last edited by Lithonion; Feb 01, 2011 at 03:14 PM.
Old Feb 01, 2011, 05:24 PM
tftcrider is offline
Find More Posts by tftcrider
Registered User
I would not buy from these guys. I order an AT corsair that did not work AND had a bad ESC. I returned it and expected a full refund. Well, to my surprise, they charge a 15% restocking fee. So I basically paid 50 bucks to see a plane, pay for shipping to me and back to Nitroplanes totaling 98 bucks. I have a great business model. Sell crappy products, have them returned and still make 60 bucks off a poor customer. Don't waste your time guys. Stick to Parkzone, E-flite, and other companies, but not this one.
Old Feb 03, 2011, 12:29 AM
Lithonion is offline
Find More Posts by Lithonion
Have you seen my nut?
Lithonion's Avatar
Nice to see this thread is on nitros ignore list again.
Old Feb 03, 2011, 08:29 PM
Lithonion is offline
Find More Posts by Lithonion
Have you seen my nut?
Lithonion's Avatar
I made my own motor mount. So my plane is repaired. My Corsair will be here tomorrow. If there are any issues with it, I will just get parts from PW-RC. That was my last airplane purchase. Very poor handeling on the CS side.
Thanks.
Last edited by Lithonion; Feb 03, 2011 at 09:37 PM.
Old Feb 07, 2011, 12:18 PM
vanderbrander is offline
Find More Posts by vanderbrander
Just an Earth bound misfit - I
vanderbrander's Avatar
Crystal,

Order # yhst-17210252890263-173791

I've had no news on the whereabouts of my order.

Tracking # you gave me is 1ZX03V030396704860 comes up as no good according to USPS.

Can you give me a status update please.

Also posted this on your other thread page.
Old Feb 07, 2011, 02:52 PM
Nitro_Crystal is offline
Find More Posts by Nitro_Crystal
Quote:
Originally Posted by Lithonion View Post
I have not got the P-51 yet. It was suppose to be here yesterday but UPS did not do any residential deliveries due to weather. And today is looking worse then yesterday. I might get it this week if the snow and ice let up.

I am a repair tech for the company I work for, I do on site and depot work. Equipment I work on cost in the range of 500 dollors up to 10k. I never have forgot to send back any part when they send me equipment to diagnose or repair. Even if it is stuff not even related to whats being repaired. Then again you have to be organized and responsible. I ordered the new corsair a few days ago from Nitro, I hope I didn't make a mistake.

Another oddity is how many motors have any of us purchased over the years that come with the mounting hardware. Every motor I have purchased both cheapos and name brand come with the hardware. This dynam motor they sent me was brand new in the factory wrapper. No screws or motor mount.

If they say they have to order the mount, I am going to gut my servos out I put in it and just toss the plane. Its getting above and beyond what its worth to me. And right now its not worth 4 Advil for my headache. Plus this is airplane 22. Its not like I don't have something else to fly this spring.


Hi Lithonion! Right here with you and I sincerely apologize for the delays you have been experiencing. I immediately pulled up your orders records and on 1/21, new motor and esc was shipped out and delivered on the 31st. I will be personally heading over to the technician's department for you to have the hardware sent to you. Thank you for your patience and understanding with you, Lithonion, but I will be right with you to make sure your order gets situated as soon as possible. I will keep you updated very shortly!
Site Sponsor
Old Feb 07, 2011, 03:06 PM
Nitro_Crystal is offline
Find More Posts by Nitro_Crystal
Quote:
Originally Posted by vanderbrander View Post
Crystal,

Order # yhst-17210252890263-173791

I've had no news on the whereabouts of my order.

Tracking # you gave me is 1ZX03V030396704860 comes up as no good according to USPS.

Can you give me a status update please.

Also posted this on your other thread page.

Most definitely, Vanderbrander! Your order is ready to go and we made sure it is well taken care of. Vanderbrander, your tracking is 1ZX03V030393591112 and is already in process for packaging and shipment. I'll be monitoring the progress of your order closely as well to ensure it leaves and gets shipped out today for you, Vanderbrander! Hope you had a very wonderful weekend as always and have a terrific week ahead!

Warm regards,
Crystal
Nitroplanes.com
Site Sponsor
Old Feb 07, 2011, 05:18 PM
The Hack is offline
Find More Posts by The Hack
Registered User
The Hack's Avatar
Quote:
Originally Posted by Lithonion View Post
I have not got the P-51 yet. It was suppose to be here yesterday but UPS did not do any residential deliveries due to weather. And today is looking worse then yesterday. I might get it this week if the snow and ice let up.

I am a repair tech for the company I work for, I do on site and depot work. Equipment I work on cost in the range of 500 dollors up to 10k. I never have forgot to send back any part when they send me equipment to diagnose or repair. Even if it is stuff not even related to whats being repaired. Then again you have to be organized and responsible. I ordered the new corsair a few days ago from Nitro, I hope I didn't make a mistake.

Another oddity is how many motors have any of us purchased over the years that come with the mounting hardware. Every motor I have purchased both cheapos and name brand come with the hardware. This dynam motor they sent me was brand new in the factory wrapper. No screws or motor mount.

If they say they have to order the mount, I am going to gut my servos out I put in it and just toss the plane. Its getting above and beyond what its worth to me. And right now its not worth 4 Advil for my headache. Plus this is airplane 22. Its not like I don't have something else to fly this spring.
Buy A Steve Neu motor and you donít get so much as a screw. You also pay triple of a Hacker. They are good high end motors though you pay through the nose for them. Many parts of the hardware I get with most motors are junk anyway. Prop adaptors out of tolerance and such. I'm amazed how much smoother things run when you get good equipment. Sometimes we must fabricate. They should return anything they get from you ( I used to run a pneumatic tool repair department) and they should be paying attention. On the other hand when I return things, it's important to remember to send in ONLY the broken piece.
Old Feb 16, 2011, 02:13 PM
HBPD is offline
Find More Posts by HBPD
hbpd
HBPD's Avatar
Hi Guy's...
Just one question, when will the Dynam C-47 Transporter airframe kit be available? I have the DC-3 original version but it has a lot of flight time and needs a "Face-Lift" The Transporter airframe would be perfect.

Johnny Jet
Old Feb 22, 2011, 09:04 PM
Hoopsta17_99 is offline
Find More Posts by Hoopsta17_99
Registered User

Airfield b-25 bomber


Hi I was on Nitroplanes.com the other night and happened upon your airfield b-25 bomber. I think its an amazing looking plane, however the description was kind of vague. I was wanting to know what kind of rx/tx, servos, esc's, battery and charger the RTF comes with. I also wanted to know what is the highest mAh 11.1V battery the electronics can handle without frying them.
Old Feb 23, 2011, 01:56 PM
whytee18 is offline
Find More Posts by whytee18
Registered User
hey there im just trying to figure out the order status of yhst-62196343123315-105940 i ordered over a week ago the item is in stock and it hasnt shipped yet
Old Feb 23, 2011, 03:29 PM
whytee18 is offline
Find More Posts by whytee18
Registered User
message received
Last edited by whytee18; Feb 23, 2011 at 03:38 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Welcome to our official Venom Group International / RC Groups product support forum! Chris Nicastro Venom 84 Feb 07, 2012 12:15 AM
Discussion WELCOME Everyone to the Banana Hobby Support Forum! banana hobby Banana Hobby 3192 Nov 27, 2010 02:33 PM
Sold P-40 Nitroplanes/Airfield 31.5" complete (offers welcome) kstwister Aircraft - Electric - Airplanes (FS/W) 4 May 11, 2010 11:24 PM
Discussion Lousy NitroPlanes Support for bad ESC in Brushless A10 wsame Foamy EDFs 13 Jan 18, 2010 01:54 PM