Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by boredom.is.me, who may elect to delete unwanted replies.
Old Oct 18, 2010, 01:23 PM
coriolan is offline
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar

9" Mono with IPS


Fished out of the scrap yard for a picture before recycling!Wasn't very succesful so got shelved after one runThe motor is GWS 12mm from 40mm ducted fan with a FMA 9 Amps esc, was running on 72Mhz because my boat Rx are too bigI think the problem came from the prop used,a 3 blades low pitch from Robbe meant for small scale boats. Maybe it would have been better with a submerged drive!This was my only venture so far in micro size,I tend to favor about 18" hulls with speed-400 or 20X40mm inrunners which are easier to prop with Octura and handle high speed better!And the motor mount double as water cooling jacket.
Last edited by coriolan; Oct 18, 2010 at 01:36 PM.
Sign up now
to remove ads between posts
Old Jan 24, 2011, 03:11 PM
balsapilot is offline
Find More Posts by balsapilot
Registered User
My small fleet:
http://img843.imageshack.us/i/fleetl.jpg/

Yellow one = 40cm long
green one = 37cm long
Bingo Race = 35 cm long

All have Speed 400 6v with light 8 Cells and flood chamber/channel(?).

I will built a fourth one, but not sure which model. Small Wildthing,
http://www.rcuniverse.com/forum/m_72...tm.htm#7275906

or Pouplpito Evo
http://nicodemo.forumpro.fr/t15-poul...made-in-poulpe

I have plans for both
Last edited by balsapilot; Jan 25, 2011 at 12:13 PM.
Old Jan 28, 2011, 02:14 PM
abletowinginc is offline
Find More Posts by abletowinginc
Lets make it remote control!!!
abletowinginc's Avatar

air boat


12.9 inches
Old Feb 05, 2011, 08:13 PM
coriolan is offline
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
Quote:
Originally Posted by balsapilot View Post
My small fleet:
http://img843.imageshack.us/i/fleetl.jpg/

Yellow one = 40cm long
green one = 37cm long
Bingo Race = 35 cm long

All have Speed 400 6v with light 8 Cells and flood chamber/channel(?).

I will built a fourth one, but not sure which model. Small Wildthing,
http://www.rcuniverse.com/forum/m_72...tm.htm#7275906

or Pouplpito Evo
http://nicodemo.forumpro.fr/t15-poul...made-in-poulpe

I have plans for both
The "Wild thing" is a blast in any configuration (IC,electric or gasoline). I have the original article by John Finch in my blog. Its easy to build and handle very well, I used the shape of it for one of my 16" mono.
Last edited by coriolan; Mar 09, 2011 at 08:54 PM.
Old Feb 06, 2011, 11:26 AM
balsapilot is offline
Find More Posts by balsapilot
Registered User
Quote:
The "Wild thing" is a blast in any configuration (IC,electric or gasoline). I have the original article by John Finch in by blog. Its easy to build and handle very well, I used the shape of it for one of my 16" mono
Last week I started with a wildthing, 40cm long.
I see that you didn`t built a floodchamber in your wildthing hull.
Do you dont overturnred hull on the pond?
Does the turnfin help to avoid overturns?
Old Feb 06, 2011, 06:41 PM
coriolan is offline
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
We don't use flood chamber around here for oval racing (turn only one direction) and if you flip its just a DNF (races are only 5 laps and less than 2 minutes). The turn fin help as a pivot point in the turn to prevent skidding
http://www.namba.com/content/library...a_rulebook.pdf
Visited "La-chaux-de-fond" many years ago
Old Feb 08, 2011, 10:34 PM
nemoskull is offline
Find More Posts by nemoskull
Pilot, Co-pilot, Navagator
nemoskull's Avatar

S.S. Botany Bay


15 inch hull boat. not sure about this one, the hull is 15 inchs, but the rudder puts it over that.

S.S. Botany Bay micro RC boat. (2 min 34 sec)
Last edited by nemoskull; Feb 08, 2011 at 10:46 PM. Reason: added link
Old Feb 14, 2011, 06:39 PM
balsapilot is offline
Find More Posts by balsapilot
Registered User
Quote:
We don't use flood chamber around here for oval racing (turn only one direction) and if you flip its just a DNF (races are only 5 laps and less than 2 minutes). The turn fin help as a pivot point in the turn to prevent skidding
thank you coriolan

Quote:
QVisited "La-chaux-de-fond" many years ago
Interesting, I don`t live far from there (compared to canadian ratio).
Did you bought an expensive watch?

I never been in canada because I dont like to travel to countries where its colder than switzerland.
Old Feb 18, 2011, 11:43 PM
coriolan is offline
Find More Posts by coriolan
"Unnecessary Necessity"
coriolan's Avatar
Quote:
Originally Posted by balsapilot View Post
thank you coriolan



Interesting, I don`t live far from there (compared to canadian ratio).
Did you bought an expensive watch?

I never been in canada because I dont like to travel to countries where its colder than switzerland.
Have had a Rolex Submariner for many years now, at the time it was about equivalent to $350, they now cost over $1500 here now but considering inflation I might say they are now more affordableThe part of Canada were I live is a lot warmer than the rest of the country, most winter we dont even get any snow
Old Feb 28, 2011, 08:24 AM
boredom.is.me is offline
Find More Posts by boredom.is.me
Micro Boat Forum Founder
boredom.is.me's Avatar
Awesome!! I'll try an get some.
Old Mar 09, 2011, 08:24 PM
stompjrkz400 is offline
Find More Posts by stompjrkz400
Registered User
stompjrkz400's Avatar

Depron PZ Brick Outrigger


kinda sucky went to post the pics of this and do a build log, then i found your post and see its been done before haha but anyways here are my pics

i still need to modify the rudder more, need a little more throw

im using an blade msr board and an airhogs motor with a eflite 4stie gearbox







does good so far, torque rolls alot though, im not a boat builder, electronics are no good for the heli anymore tho
Old Apr 13, 2011, 06:06 PM
Aydemir is offline
Find More Posts by Aydemir
Model RC Boat
Aydemir's Avatar

Micro Mahogany Classic


Hello guy's I have 5 5/8 long mahogany boat, I used very small 1/64 scale full proportional
car radio parts for RC. Car X-Trek Pro ferrari from toysrus. I just changed the battery with Lipo. All brass fittings are hand made. There are some pictures enjoy.
Last edited by Aydemir; Apr 13, 2011 at 06:13 PM.
Old Apr 14, 2011, 03:52 AM
meatbomber is offline
Find More Posts by meatbomber
Square-rigger
meatbomber's Avatar
outstanding little boat ! Thanks for sharing !


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion closed Gray Aerial Photography 145 Aug 14, 2010 03:35 AM
Found advice on "How do you post pictures of your items?" ralfharry Aircraft - Electric - Airplanes (FS/W) 2 Mar 05, 2010 10:22 PM
Discussion Post your parkzone t28 trojan pictures hbsurfer Your Plane Photos 1 Dec 06, 2009 06:13 PM
Gallery Post your full size autogyro pictures, for model building and flying inspiration. rotorheid Auto Gyros 10 Sep 29, 2009 06:34 PM
Gallery Post your method and pictures on how to make your heli colorful and bright =) crxef9 Micro Helis 13 Feb 14, 2007 09:45 PM