Let's all post pictures of our boats. To start off here are some of mine.

7.3" Micro-Bat Rigger
1015 11000kv BL
120mah 25c 1s Hyperion
AR6400
Kyosho Mini-Z prop

6 Series Stealth Cat (coming soon as a kit)
ABS formed hull
custom laser cut Hardware
Kyosho Mini-Z prop

6 Series Rudder/Drive Proto
1.5mm and 1mm Interlocking Balsa
Bolts on to transom with two bolts
Adjustable strut angle
max prop diameter: can't remember right now

Breeze 4" Sail Boat
AR6400
Carbon Fiber Mast and Boom
Depron hull
Balsa Hardware
No motor

5 Star Airboat
AR6400
6mm pager and AeroAce prop
5 Star Notebook plastic and depron hull
Ya, it is a mess.

7" Micro Skipper Airboat
AR6400
7mm pager and AeroAce prop
120mah Eflite
Depron Hull and Gear

5.3" Nano-Bat Rigger
to be continued
Intended for Plantraco Gear
Kyosho Mini-Z prop

Kyosho Mini-Z Cat
total bust...
1220 10300kv BL
TGY 6A Plush ESC
Rhino 360mah 2s lipo
EM 3.7g servo

8.5" Shameless Micro-Bat Rigger
1015 11000kv BL
XP-3A ESC
AR6300
AS2000 1.5g servo
Hyperion 1s 120mah 25c Lipo

well, i havent been at it for too long, but i'l put up a few pics

These are mine (for now):

10" hydro on a 18mm outrunner, 3S
10" cat on a 1230 inrunner, watercooled, 2S

My mini cat by hobby king ! very nice boat


http://cineastv.forumeiros.com/barco...-2010-t985.htm

cineas

This is my scrach bult Tiny-Tim,

I am still learning about Micro electronic set ups, how to fit them in to keep the CG so it looks and acts like a big boat.

12 inch "Tally craft" cracker box.

My micro is fun but not nearly as fancy as some of these.

My son and i have dubbed it the Puddle Pod becauce it is basically a 1/6th scale Peapod hull.

Here's my 2

HMAV Bounty



St.Helena HEIC Packet

Here are a few of my 1/48 nano hydro. Dave.

my 8 inch United States Coast Guard Cutter.
8 inches, length, 1.25 beam
130 mah lipo, ar6400. rudder throttle.
small brushed Dc motor out of walmart cheap rc car.

aluminum boat from Arizona tea can just a one day project. slow and liked to turn right or go streight...but it was made with electrics from a airhogs plane and my props were aluminum from a can too that i just bent. shafts are from a can of air tube.

Here are some photos of Mona Lisa. She is just over 2 sticks (13 inches). The motor is from a large scale servo, as is the speed control. The birds, and skipper are sculpted from plastic spure, from old model car kits, using a hot soldering iron, small files etc. The skippers clothes are made from the same plastic, melted down in liquid plastic cement, then brushed over bits of paper towel and positioned. All the pulleys, cabin and other fittings were cut from plastic sheet.
The roof is made from fine sandpapper, painted to look like roofing matrial.

My collection, all boats have a length below 300 mm

I have a NS Savanh 14", A Smitt Houston 14", Miami Vice Sarabb 14", A U538 18", Lindberg shrimp boat 14", Lobster boat 14", 12" PT, 12"sport fisherman, 12" pilot boat, several micro subs, The billings John Alden sail boat 14", The Uss New Jersey 22" and I am working on a 1:125 Calypso. Pictures are on my site at: www.jsgill.net
Just a few of the pic's