Please post your OSD Pro wiring diagrams here! - Page 9 - RC Groups
Thread Tools
Jun 03, 2012, 01:10 AM
Watts up ?
OzparkPilot's Avatar
Ok got mine working just now. Can someone in the know yell me, do I need to fit a BEC ?
Sign up now
to remove ads between posts
Jun 03, 2012, 03:00 PM
Registered User

Can someone take a look at my diagram....


After powering up everything works well. Only 1 problem:

Software to my OSD/eLogger works but is asking me to download latest firmware every time I open it. I'll download latest OSD/eLogger save and sign out and then when I come back to he program it will ask me to update to the latest version again & again & again...

Thank you....
Last edited by TBello; Jun 04, 2012 at 07:32 AM.
Jun 04, 2012, 07:45 AM
Registered User
Quote:
Originally Posted by TBello
After powering up everything works well. Only 1 problem:
So you figured out your battery problem? Good deal! I don't know what to tell you about your SW issue, other than to perhaps open up a support ticket with ET.
Jun 04, 2012, 07:50 AM
Registered User
Thank you, yes I did... Thing looks and operates perfectly. Yes, I prob need to do a ticket on the Software issue. Looking forward to this weekend for the maiden flight. Thank you for all your and camship's help!!!

Quote:
Originally Posted by bgarber
So you figured out your battery problem? Good deal! I don't know what to tell you about your SW issue, other than to perhaps open up a support ticket with ET.
Jun 06, 2012, 04:20 AM
Watts up ?
OzparkPilot's Avatar
I need some help here please:

ET Equipment:

ET Osd Pro
Guardian stabilizer.
ET Gps V4
Elogger V4

Aircraft:
Skysurfer with 4 servos as standard.


Questions:

does anyone have a diagram that is proven I can simply use please ?
Do I need a BEC anywhere ?


Im really on a steep learning cuve with no one around my area but you kind folk !

* FPV platform is proven and works great after the normal trail and error but Im now adding this. I have it working with minimal OSD but want to get:

* artificial horizon working - This is based on the guardian stabilizer right ? Cant see it displayed ? Could someone please explain what I have not done ? ?

* RTH ? Where do I EVEN start ... ?


Guys I really am reaching out here and would love your expertise - I thank you in advance.

BW
Jun 06, 2012, 08:19 AM
Registered User
Hey BW, My diagram above has been looked at by several different guys and everyone says it's good. I've bench tested it and all works perfect. Have you at least flown with your FPV gear with the BASIC setup first?

Tim


Quote:
Originally Posted by BingWing
I need some help here please:

ET Equipment:

ET Osd Pro
Guardian stabilizer.
ET Gps V4
Elogger V4

Aircraft:
Skysurfer with 4 servos as standard.


Questions:

does anyone have a diagram that is proven I can simply use please ?
Do I need a BEC anywhere ?


Im really on a steep learning cuve with no one around my area but you kind folk !

* FPV platform is proven and works great after the normal trail and error but Im now adding this. I have it working with minimal OSD but want to get:

* artificial horizon working - This is based on the guardian stabilizer right ? Cant see it displayed ? Could someone please explain what I have not done ? ?

* RTH ? Where do I EVEN start ... ?


Guys I really am reaching out here and would love your expertise - I thank you in advance.

BW

Hey BW, My diagram above has been looked at by several different guys and everyone says it's good. I've bench tested it and all works perfect. Have you at least flown with your FPV gear with the BASIC setup first?

Tim
Jun 06, 2012, 07:22 PM
Watts up ?
OzparkPilot's Avatar
Thanks Tim - No, Only bench tested the ET but the plane is very proven and works great. Just wanted to ensure Im not overlaoding the system and as I have the ET stuff now installed, I want to have the RTH functional





Quote:
Originally Posted by TBello
Hey BW, My diagram above has been looked at by several different guys and everyone says it's good. I've bench tested it and all works perfect. Have you at least flown with your FPV gear with the BASIC setup first?

Tim





Hey BW, My diagram above has been looked at by several different guys and everyone says it's good. I've bench tested it and all works perfect. Have you at least flown with your FPV gear with the BASIC setup first?

Tim
Jun 13, 2012, 09:24 PM
The Toy Man
Frisk151's Avatar
I see a whole bunch of great schematics for the OSD Pro & eLoggers but none of the OSD Pro and the Flight Data Recorder Pro.

If you have any experience using those two in combination, I'd love to see your schematics or details on your system. I just posted a request here with my system details here: https://www.rcgroups.com/forums/show....php?t=1671783
I'd really appreciate hearing from anyone with experience with using these two.
Thanks!
David
Jun 23, 2012, 02:37 AM
Registered User

lost in wiring


Hi
We have purchased a fpv set containing : fat shark predator goggles, immersionrc fatshark compatible video TX, pan-tilt servo mounted ccd camera, Eagle tree e-logger v.4 + OSD, GPS sensor. we're going to install it in a Calmato.

We are TOTALLY lost in wiring all that stuff, particularly in term of batteries (bec) conecting. We use an eflite 60 amp esc (containing a BEC)

Would you be kind to guide us ? We've read seriously your schmes, but they are way too complicated for us newbies.

THX
Jun 25, 2012, 03:26 AM
Watts up ?
OzparkPilot's Avatar
What would be really helpful for people like us ( newbie fpv ) would be some nice tutorial videos to help. I got mine working in 5 minutes but took it apart to install now I can't replicate the previous results !
Jun 26, 2012, 05:33 AM
Registered User
Thanks a lot for all information
Jun 26, 2012, 05:43 PM
Registered User
Rick~K's Avatar

Can someone look this over


I can't get my EE station to work, used PC software, all updated firmware. All I get is the logo in my goggles.
Jun 30, 2012, 03:23 PM
Registered User
Crumpled's Avatar
Quote:
Originally Posted by Rick~K
I can't get my EE station to work, used PC software, all updated firmware. All I get is the logo in my goggles.
Hi, here's my ET setup if it helps.
Jun 30, 2012, 07:57 PM
Registered User
Quote:
Originally Posted by Crumpled
Hi, here's my ET setup if it helps.
BEC to rx you use only +?
Instead of plugging in the GPS to the Elogger GPS port you daisy chain the GPS with the Guardian and it work.?
Jul 01, 2012, 06:08 AM
Registered User
Crumpled's Avatar
BEC to RX yes, why?, Guardian then GPS, No drew them the wrong way round, GPS of Logger then daisy chained to Guardian your correct, well spotted


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Please post your brushless motor pole count here billpa Eagle Tree Systems 91 May 05, 2015 12:31 AM
Discussion Please post photos of your sensor installations here! billpa Eagle Tree Systems 8 Jul 09, 2011 05:21 AM
Discussion Post your small flying field video here! Lafayette Aerial Photography 38 Sep 05, 2010 01:46 AM
Help! Noob needs help wiring elogger-v3/OSD Pro Mykro Eagle Tree Systems 7 Jun 25, 2010 12:59 AM
PLEASE post pics of your Tiger Moths here!! JREEVES Parkflyers 3 Oct 26, 2001 09:51 PM