Thread Tools
Aug 01, 2010, 10:41 PM
Model RC Boat
Aydemir's Avatar
Build Log

MarkV Special Operation Craft


Hello guys I have unfinished 3 project and I start new one anyway I want to share my new
build MarkV SOC Boat I don't have a plan but I was start to measure
some pictures and computer drawings. I decided to build 23 inches long
there are progresing pictures enjoy.Best regards
Sign up now
to remove ads between posts
Aug 01, 2010, 11:53 PM
Grumpa Tom
Kmot's Avatar
It boggles my mind, how you did this just from photos!

Anyway, very cool watercraft, and a great looking model so far.
Aug 02, 2010, 12:35 AM
NeverAgainVolunteerYourse lf
nick_75au's Avatar
Ive "unfinished" quite a few more than 3

Looks fantastic

Nick
Aug 02, 2010, 01:21 AM
Spreckels Lake, GGP, SF, CA
craig_c's Avatar
Very cool!

Share your secrets for working from photos...
Latest blog entry: Ah, To be young again...
Aug 02, 2010, 03:25 AM
Aydemir,

very cool build, just from photos

keep posting

kolay gelsin

mp
Aug 02, 2010, 09:51 AM
Registered User
Very good work!
Aug 02, 2010, 12:50 PM
Sea Dragon-Lover
Umi_Ryuzuki's Avatar
You have a good start on the boat.

Had you considered working from some of the CB90 plans?
https://www.rcgroups.com/forums/show....php?t=1046013
Aug 02, 2010, 01:51 PM
"day ain't over yet-"
der kapitan's Avatar
Interesting subject, a special ops boat---.

Where would one find a set of plans for it---?
Aug 02, 2010, 02:33 PM
GILL
GILL RC's Avatar
Great job. I like to work from pictures too (push tug).
I hope that you plan to use jet drives. I think that a pair of the small Graupners would be perfect.
Aug 02, 2010, 03:44 PM
Model RC Boat
Aydemir's Avatar

Thanks Guy's


Hello guy's thanks for comment for all. I have no secret for start this boat
I was searching all around internet and I just find some pictures and some
computer drawings. I didn't find set of plans there are some drawings
on the Hodgdon yatchs but not exactly the same one looks like skinny one
I can post for reference.I guess boat info classified
I dont want to make any complication for jet drive I am willing to use
one motor and direct drive shaft for prop. Orijinaly have jet drives.
I realy measure the lengt then make some larger copy desired size then start to working on the frame. I have make many mistakes but I try to correct
them. I used bass wood sticks several different shapes I leave them in
water to give curves.Thanks to CA glue working on wet surface. I use also
1/16 Birch ply for planking and some 1/8 birch ply for other parts.Bass wood
sticks are very handy for working. CB90 Boat also nice but next time maybe
I find plans when I seach thanks again. I will post next time more pictures.
Best regards for all.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Special push/pull rod in a special application ... ??!! khaled_abobakr The Builders Workshop 10 Apr 16, 2010 05:50 AM
Discussion Erratic Motor/ESC Operation A-37 Racing Boats - Electric 8 Nov 22, 2009 04:43 PM
Discussion Operation: Bust My Wallet, is complete... Matt Gunn FPV Talk 9 Sep 11, 2009 09:20 PM
4 channel operation, vs. focus 3 operation Dandi6065 Parkflyers 2 Dec 26, 2001 10:07 PM