Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 11, 2010, 01:42 AM
NoobAgain is offline
Find More Posts by NoobAgain
Rusty Fingers
NoobAgain's Avatar
I went over to the AMA site and found the plans. They are for a 54 inch span Spacewalker that was designed and built by Laddie Mikulasko. The guy is a machine when it comes to scale subjects. I have a Canadair CL-415 hanging in my garage that I flew from his plans years ago. I went and ordered the plans, and will order a cowl from Easy Built Models who had a similar sized Spacewalker. Looks like a great build. I am going to go with a different set of colors than the standard yellow and red though!
Sign up now
to remove ads between posts
Old Aug 11, 2010, 01:31 PM
bob_suruncle is offline
Find More Posts by bob_suruncle
I think I can glue that..
bob_suruncle's Avatar
Quote:
Originally Posted by NoobAgain View Post
I went over to the AMA site and found the plans. They are for a 54 inch span Spacewalker that was designed and built by Laddie Mikulasko. The guy is a machine when it comes to scale subjects. I have a Canadair CL-415 hanging in my garage that I flew from his plans years ago. I went and ordered the plans, and will order a cowl from Easy Built Models who had a similar sized Spacewalker. Looks like a great build. I am going to go with a different set of colors than the standard yellow and red though!
Had a look around Easy built models and didn't see a Space walker or cowl. Do you have a part number or cost for this item?

thanks
Old Aug 11, 2010, 03:40 PM
NoobAgain is offline
Find More Posts by NoobAgain
Rusty Fingers
NoobAgain's Avatar
I didnt see it either, but I remembered them having one. I emailed them and asked about it. The specs are very similar, so the cowl should work. Here is the email response I received from the very helpful people at Easy Built:

Hello Greg,

cowl $10 + $5.55 shipping within the USA

Send check or money order to
EASY BUILT MODELS
PO BOX 681744
PRATTVILLE, AL 36068-1744

Best wishes,
Ann Connelly


I plan to order mine in the next day or two.

Greg
Old Aug 11, 2010, 05:10 PM
portablevcb is online now
Find More Posts by portablevcb
Registered User
portablevcb's Avatar
Depending on size might also look at Fiberglass Specialties. They have a ton of fiberglass parts for production kits from the past. I got a set of cowl/pants for a 1/6 scale WACO YMF (from the old PICA kit).

charlie
Old Aug 13, 2010, 09:10 AM
NoobAgain is offline
Find More Posts by NoobAgain
Rusty Fingers
NoobAgain's Avatar
Thanks Charlie. Was that the WACO that you flew last weekend? That thing is something to see in the air!
Old Aug 13, 2010, 08:14 PM
portablevcb is online now
Find More Posts by portablevcb
Registered User
portablevcb's Avatar
Yep. Thanks, it is really a nice flying plane, even at 8lb. Even flies good on a diesel .90
Old Aug 17, 2010, 11:22 PM
Rho is offline
Rho
Find More Posts by Rho
Rho
Mr. Brazilian Nut
Rho's Avatar
I'm waiting for my balsa wood to arrive.

Meanwhile, I'm still doing some reaserch, and I'm glad to post that image below.

I got it from a Sig instructions manual.

I'll take some data out of it before I start my on building....

Hope you enjoy
Old Aug 23, 2010, 05:51 PM
propnut07 is offline
Find More Posts by propnut07
Registered User
wow!!!! glad I found this thread.I am ready to finish my 1/4 scale spacewalker built from a sig kit.I have waviered as to thecolor scheme and to be sure I checked numerous images but now I see the beautiful beautiful green and white plane.thats going to be my color scheme for sure!!!I might even consider that as a potential build this winter.mine is sporting a satio 150 but it could easily accomodate a dle30 or something in that range.again what a gorgeous plane.
Old Aug 23, 2010, 07:52 PM
Mapco is offline
Find More Posts by Mapco
Registered User
Mapco's Avatar
Propnut

If you are referring to Steve fisher's Sky Dancer that I posted it's Green and Cream with orange pin striping. It looks like a 30's airplane.

Sonny
Old Aug 24, 2010, 06:00 AM
Mark Winstanley is offline
Find More Posts by Mark Winstanley
Registered User
Mark Winstanley's Avatar
Nice to see more Spacewalkers around. This was my first 1/4 scale model from the SIG kit. I liked it so much I built another when the first crashed, and then another with the Sportster wing. That flew great too.

When I was running Kanata Aircraft Models (KAM) we kitted a .25 size Spacewalker but called it the Revolution per Warners web site. It was about 50 inch wing span and flew great with an OS 25 motor. That was destined to be electrified but I decided to fold the company first.

Always been a favourite of mine.

Mark.
Old Aug 24, 2010, 08:12 PM
Rho is offline
Rho
Find More Posts by Rho
Rho
Mr. Brazilian Nut
Rho's Avatar
Finaly my balsa got home today, and I could start building...

There it goes the pictures.
Old Aug 24, 2010, 08:52 PM
Longhorne is online now
Find More Posts by Longhorne
Res Ipsa Aviatur
Longhorne's Avatar
You're off and running now!

Paul
Old Aug 28, 2010, 01:29 PM
austin.laws is offline
Find More Posts by austin.laws
Night flier
Quote:
Originally Posted by NoobAgain View Post
I went over to the AMA site and found the plans. They are for a 54 inch span Spacewalker that was designed and built by Laddie Mikulasko. The guy is a machine when it comes to scale subjects. I have a Canadair CL-415 hanging in my garage that I flew from his plans years ago. I went and ordered the plans, and will order a cowl from Easy Built Models who had a similar sized Spacewalker. Looks like a great build. I am going to go with a different set of colors than the standard yellow and red though!
Hi how big is ur CL 415? I am after some plans,i would like to build a LARGE scale CL 415 with air retacts and petrol engines. Nitro engines i find too unreliable. Please let me know many thanks austin.
Old Aug 30, 2010, 06:41 PM
Rho is offline
Rho
Find More Posts by Rho
Rho
Mr. Brazilian Nut
Rho's Avatar

Spacewalker II - wing


Some pictures of wing assembly.
Old Sep 15, 2010, 09:39 AM
warne is offline
Find More Posts by warne
Belém do Pará, Brasil
warne's Avatar
Acompanhando!!
Abs
Warne


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Scratch Build a J - Endeavour II Adrian B. Sailboats 62 Oct 09, 2012 10:49 AM
Build Log LVG C VI scratch build my own plans jim...... Fuel Warbirds 1 Jul 28, 2010 07:30 PM
Build Log Mosquito "Scratch" Build from Gus Morfis Plans Blue Falcon Fuel Warbirds 16 May 24, 2010 08:48 AM
Question How to find CG on scratch build, with no plans, going to try tuning as well tomorrow planebldr Beginner Training Area (Fuel) 7 May 16, 2010 10:28 AM
Discussion Scratch built Depron Ki-61 Hien "Tony" plans and build log Low Pass Foamies (Scratchbuilt) 68 Mar 28, 2010 02:56 AM