Thread Tools
Old Apr 06, 2011, 04:36 PM
Cir2kuk is offline
Find More Posts by Cir2kuk
Chris R
Are low pass filters tuned to a freq? i.e 1280mhz?

I ask because i want to use one at 1160mhz.
Sign up now
to remove ads between posts
Old Apr 06, 2011, 04:37 PM
arnaldo26 is offline
Find More Posts by arnaldo26
Registered User
Quote:
Originally Posted by Cir2kuk View Post
Are low pass filters tuned to a freq? i.e 1280mhz?

I ask because i want to use one at 1160mhz.
there is any tutorial for low pass filters?
Old Apr 06, 2011, 04:50 PM
Virgis21 is offline
Find More Posts by Virgis21
FPV flyer
Virgis21's Avatar
By the way, this was done with lawmate 1.2ghz

Antonov An-2 and fpv plane (GoPro 1080p) (4 min 58 sec)


Virgis
Old Apr 06, 2011, 06:06 PM
swing2harmony is offline
Find More Posts by swing2harmony
Registered User
Quote:
Originally Posted by iacei View Post
with a fox 800 and the stock config on 1280Mhz you can expect 4km of usable vid.
4km with the stock omni antennas on rx and tx?
Old Apr 06, 2011, 06:12 PM
Dirt-Torpedo is offline
Find More Posts by Dirt-Torpedo
...just an earth bound misfit
Dirt-Torpedo's Avatar
Quote:
Originally Posted by Virgis21 View Post
By the way, this was done with lawmate 1.2ghz
Virgis
Having jumped out of an AN-2, my recollection is V2 was a brisk jog and Vne was like a sprint. Surprised you could not keep up. :lol:
Old Apr 07, 2011, 12:24 AM
David22 is offline
Find More Posts by David22
Suspended Account
stock fox 800 video tx's work so well, I don't even bother trying out the Lawmate 1 watt 1.2/1.3 video tx's
Old Apr 07, 2011, 02:02 AM
iacei is offline
Find More Posts by iacei
Registered User
Quote:
Originally Posted by spol View Post
4km with the stock omni antennas on rx and tx?
I had reports of 2km stock, if you add a simple Vee dipole on the Tx yes you might achieve 4km but not clean video (usable is not clean)

___________________

I just tested a new jitter free servo, see page 1 i'ts unfortunately not cheap (9.5$) but it's Metal Geared
Old Apr 07, 2011, 03:02 AM
FlyingMcCoy is offline
Find More Posts by FlyingMcCoy
Registered User
Quote:
Originally Posted by iacei View Post
I had reports of 2km stock, if you add a simple Vee dipole on the Tx yes you might achieve 4km but not clean video (usable is not clean)

___________________

I just tested a new jitter free servo, see page 1 i'ts unfortunately not cheap (9.5$) but it's Metal Geared
Thanks very much for the info.
Old Apr 10, 2011, 05:23 AM
arnaldo26 is offline
Find More Posts by arnaldo26
Registered User
what'is the best llc filter (dual noch or dpcav) to use with 2,4radio and fox800?
Old Apr 12, 2011, 12:37 PM
airbagit13 is offline
Find More Posts by airbagit13
Plane Destroyer / Life Enjoyer
airbagit13's Avatar
Buying my RXs today, should I get two sunskys or two lawmates or do the standard RXs from readymaderc work well enough?
Old Apr 12, 2011, 01:53 PM
IBCrazy is offline
Find More Posts by IBCrazy
Engineer for Christ
IBCrazy's Avatar
1280MHz antennas in stock: www.videoaerialsystems.com

We also do custom antennas for any frequency.

-Alex
RCG Plus Member
Old Apr 12, 2011, 01:59 PM
IBCrazy is offline
Find More Posts by IBCrazy
Engineer for Christ
IBCrazy's Avatar
I use the 4 channel RX from readymaderc. It works well. it's better than the digital units and doesn't have issues with video sync when saturated. 1.5 miles is easy on CP omnis.

I also fly 1.2GHz Lawmate RX's on my 4 turn helicals. They are a little bit better, but not compatible with my favorite antennas (skew-planar wheel/cloverleaf).

-Alex
RCG Plus Member
Old Apr 12, 2011, 02:46 PM
airbagit13 is offline
Find More Posts by airbagit13
Plane Destroyer / Life Enjoyer
airbagit13's Avatar
Can you not use the Skew-planar/cloverleaf with lawmates?
Old Apr 12, 2011, 03:16 PM
IBCrazy is offline
Find More Posts by IBCrazy
Engineer for Christ
IBCrazy's Avatar
Quote:
Originally Posted by airbagit13 View Post
Can you not use the Skew-planar/cloverleaf with lawmates?
Old Man Mike says you can. it has been my experience that you can't. Either he is doing something out of the ordinary, or I am doing something wrong. Either way, I'd rather err on the side of caution.

-Alex
RCG Plus Member
Old Apr 12, 2011, 03:37 PM
airbagit13 is offline
Find More Posts by airbagit13
Plane Destroyer / Life Enjoyer
airbagit13's Avatar
Hmmmm... now I don't know whether I should get lawmates or the standard ReadymadeRC 1.3ghz RX.

... just when I had finally made a decision also... lol


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Lawmate vs BOB Fox 700 Tx/rx combo which one has the 1160? iacei FPV Talk 24 Jul 22, 2010 09:49 AM
Discussion 1.2Ghz Tx Only: Where to buy a cheap one iacei FPV Talk 9 Jun 07, 2010 03:03 AM
Question esc all one, can i change to different tx/rx? Fossy313 Beginner Training Area (Aircraft-Electric) 4 Jan 30, 2010 05:07 AM
Discussion 1.2Ghz 800mw video TX/RX on Ebay for $2.98 Euro _Spud_ FPV Talk 1 May 23, 2008 01:31 PM
Are 1.2ghz Tx and Rx any good. JustFly Aerial Photography 3 Apr 22, 2005 12:46 PM